- Original Message -
From: Eric Wieling aka ManxPower [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
[EMAIL PROTECTED]
Sent: Friday, December 10, 2004 1:49 AM
Subject: Re: [Asterisk-Users] No ring signal when calling internal
extensions ?
Robert Rozman
Robert Rozman wrote:
- Original Message -
From: Eric Wieling aka ManxPower [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
[EMAIL PROTECTED]
Sent: Friday, December 10, 2004 1:49 AM
Subject: Re: [Asterisk-Users] No ring signal when calling internal
extensions
Hi,
I have attached configuration settings and cannot get ring signal when
calling internal extensions. I'm probably doing something wrong so would
kindly ask for a tip how to do it properly :
exten = 11,1,Macro(oneline,SIP/11)
Calling 11 (this is the same with BT or iax softphones) doesn't
On Thu, 9 Dec 2004, Robert Rozman wrote:
Hi,
I have attached configuration settings and cannot get ring signal when
calling internal extensions. I'm probably doing something wrong so would
kindly ask for a tip how to do it properly :
exten = 11,1,Macro(oneline,SIP/11)
Calling 11 (this
signal when calling internal
extensions ?
On Thu, 9 Dec 2004, Robert Rozman wrote:
Hi,
I have attached configuration settings and cannot get ring signal when
calling internal extensions. I'm probably doing something wrong so would
kindly ask for a tip how to do it properly :
exten
Robert Rozman wrote:
Sorry, wasn't specific enough.
Caller is not hearing any ringing tone. That means just plain silence til
local extension picks up or goes to voicemail.
I have this one in macro:
exten = s,4,Dial(${ARG1},30,tr) ; 20sec timeout
but obviously something else is missing. 30 secs of
:
15093890569
- Original Message -
From: Eric Wieling aka ManxPower [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
[EMAIL PROTECTED]
Sent: Thursday, December 09, 2004 3:41 PM
Subject: Re: [Asterisk-Users] No ring signal when calling internal
extensions ?
Robert
PROTECTED]
Sent: Friday, December 10, 2004 12:41 AM
Subject: Re: [Asterisk-Users] No ring signal when calling internal
extensions ?
Robert Rozman wrote:
Sorry, wasn't specific enough.
Caller is not hearing any ringing tone. That means just plain silence
til
local extension picks up
[EMAIL PROTECTED] wrote:
can you make asteirsk do a fast ring as well?
Do you mean a fast busy? If so, what you're looking for is called
congestion.
If you mean making a faster ring cadence (time between rings), look at
the indications.conf wiki page.
Nick
P.S. Please don't post that
Robert Rozman wrote:
Hi,
I'm using 1.0.2, but will try with latest version just to be sure ...
So presented macro should give caller a ring signal ?
Yes, unless your SIP device really sucks or doesn't provide the correct
SIP messages to tell Asterisk to make a ringing tone.
10 matches
Mail list logo