I have a digium D300-E1 card and the R2 link ready.
Actually it is already connected to the card and all alarms cleared. Am not in
Argentina but the R2 signaling is configured with Argentina signaling. It works
very well when I connect a Cisco 5350 and configure it to Argentina R2 . Am not
Sam Njenga wrote:
I have a digium D300-E1 card and the R2 link ready. Actually it is
already connected to the card and all alarms cleared. Am not in
Argentina but the R2 signaling is configured with Argentina signaling.
It works very well when I connect a Cisco 5350 and configure it to
Date: Mon, 20 Sep 2004 21:35:31 +0800From: Steve Underwood [EMAIL PROTECTED]Subject: Re:
[Asterisk-Users] Re: Fw: Asterisk R2 SignalingTo: Asterisk Users Mailing
List - Non-Commercial Discussion[EMAIL PROTECTED]Message-ID:
[EMAIL PROTECTED]Content-Type:
text/plain; charset=ISO-8859-1;
I have a digium D300-E1 card and the R2 link ready. Actually it is already connected
to the card and all alarms cleared. Am not in Argentina but the R2 signaling is
configured with Argentina signaling. It works very well when I connect a Cisco 5350
and configure it to Argentina R2 . Am not
+++ Tenorio, Leandro [15/09/04 10:58 -0300]:
I've seen a lot of times, people that try to get R2 MFC to *, most of them trying to
use Dialogic Boards (BTW They 're Very expensive), none of them where succesfully,
If you want to use PCI Cards on your server, why don?t u ask to your carrier to
I did quite a bit of work on this library about a year ago. In the end, I
abandoned it because the project went belly up.
I can tell you this much
MFC-R2 for Argentina is the default configuration and looked fairly well
supported in the source code. I, of course. couldn't check it because
This is complete rubbish. The default for that code is China R1,
although some measure of partial support for Argentina in in there too.
I wrote that code, and it is useless. It works as well for incoming
calls as it does for outgoing - its useless. When I did a proper
implementation of R2
I'm from India and I'm trying to look for info abt E1 R2 and asterisk too.
What do u mean by put a gateway with E1's and SIP ? I dont know if any
providers provide E1/PRI who they need any extra hardware for that ?
I've developed a library for R2 that is working good in Argentina. It has
some