you have all these includes in your (messy) dial plan
yet you didnt post the files that you use in include.
--- Johnny Stork [EMAIL PROTECTED] wrote:
I am new to Asterisk and the protocol/language
complex world of VoIp and PBX. But I have a
dedicated machine running [EMAIL PROTECTED] 2.8, a
[from-pstn]
include = from-pstn-custom ; create this context in extensions_custom.conf
to include customizations
include = ext-did
;exten = fax,1,Goto(ext-fax,in_fax,1)
exten = _.,1,Wait(1)
exten = _.,2,Goto(from-pstn,s,1)
Here is what is happening :
Your ZAP channels are in the context
that be used in place of s?
Thanks kindly
-Original Message-
From: Time Bandit [mailto:[EMAIL PROTECTED]
Sent: Thursday, April 27, 2006 6:19 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Unable to accept incoming PSTN calls
[from-pstn
)
-Original Message-
From: Johnny Stork
Sent: Thursday, April 27, 2006 7:11 AM
To: asterisk-users
Subject: RE: [Asterisk-Users] Unable to accept incoming PSTN calls
Since I am using [EMAIL PROTECTED] 2.8 which now uses freePBX, there does
not seem to be a menu area/settings for Incoming
?Thanks kindly -Original Message- From: Time Bandit [mailto:[EMAIL PROTECTED]
] Sent: Thursday, April 27, 2006 6:19 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Unable to accept incoming PSTN calls [from-pstn]
include = from-pstn-custom ; create
[from-pstn]
include = from-pstn-custom ; create this context in
extensions_custom.conf to include customizations
include = ext-did
;exten = fax,1,Goto(ext-fax,in_fax,1)
exten = _.,1,Wait(1)
exten = _.,2,Goto(from-pstn,100,1)
Try somethin like
[from-pstn]
include = from-pstn-custom ; create
: Thursday, April 27, 2006
7:32 AMTo: Asterisk Users Mailing List - Non-Commercial
DiscussionSubject: Re: [Asterisk-Users] Unable to accept incoming
PSTN calls
Johnny,You need to setup an Inbound Route that matches all DIDs and
all CIDs. In FreePBX, click on Inbound Routes, create a new
I actually tried that before but it didnt seem to work. I tried once again
and still nothing rings, whether I set the destination to a single
extension, or a ring group. But the suggestion from another user below did
work, but wont go to voicemail yet when its not answered.
[from-pstn]
I am new to Asterisk and the protocol/language complex world of VoIp and PBX.
But I have a dedicated machine running [EMAIL PROTECTED] 2.8, a single TDM400P
with one FXS module card connected to a standard analog phone. The second card
is an X100P connected to my analog PSTN phone line. I also