Hi Joao,
What is the T3 timeout set to? If it is short, try making it something
like 15000 (it is in milliseconds). Your T3 timeout problem could be due
to slow reponses from some destinations.
For your second issue, the following is definitely a protocol error:
UniCall/1 - 1 off
Hello Steve,
Thank you for being so active helping people with Unicall problems,
I am sure a lot of us appreciate this.
I could tweak a little bit more with your software versions from the
download site and I got half of the problems solved. Now I am able to
set the loglevel to 255 and
Dear Moises,
Thank you for your reply! I am not sure how to use the testcall tool
to debug, but here we go with what I tried. The Main Thread message does
never stop showing on the screen, I bet this is not the expected
behavior tho. Maybe this can be of any help:
Dear Moises,
Thank you for your reply! I am not sure how to use the testcall tool
to debug, but here we go with what I tried. The Main Thread message does
never stop showing on the screen, I bet this is not the expected
behavior tho. Maybe this can be of any help:
Joao. The more important thing about testcall is that it allows you to
isolate the problem (you dont need asterisk) .
I would recommend you to read this document I wrote:
http://phpmexic.u33.0web-hosting.com/wordpress/misc/mfcr2-asterisk-unicall.pdf
Here is described a bit more detailed. Is in
I helped debugging a tormenta card about 1 month ago. Thats the only
experience I have with Tormenta card. But he had the same message
about FAS error in /proc/zaptel. Why dont you try using testcall
(included with libunicall), that will tell you exactly where the call
is staying?
On 6/10/06,
Hi Joao,
One of the *big* advantages of the Tormenta 2 cards over the more recent
cards from Digium is the driver actually counts various errors, and lets
you see link problems easily.
The FAS error count is increasing, which means you have a link problem.
There, that was easy. With a TE411
Hello guys!
I hope you bare with yet another newbie on the list! :-)
I am trying to setup an asterisk installation in between a Siemens
HiPath 3800 and my local carrier (Telefonica/Brazil). Both running R2.
ISDN is not an option on the carrier. :-(
I could apparently setup both
