On 10/09/2012 12:28 AM, Brett Lehrer wrote:
How many fax and voice calls (which codecs for tha latter ones ?) are on
average using your DSL line ?
1. Previously, I experienced failures during the process of converting
incoming PDF documents into ready-to-send fax image files while the reverse
On 10/09/2012 07:40 AM, Steve Underwood wrote:
On 10/09/2012 12:28 AM, Brett Lehrer wrote:
How many fax and voice calls (which codecs for tha latter ones ?) are on
average using your DSL line ?
1. Previously, I experienced failures during the process of converting
incoming PDF documents into
How many fax and voice calls (which codecs for tha latter ones ?) are on
average using your DSL line ?
1. Previously, I experienced failures during the process of converting
incoming PDF documents into ready-to-send fax image files while the reverse
process (from a fax file into a PDF or whatever
I'm running Asterisk 1.8.11.1 and am connected to the nexVortex trunking
service over a DSL line solely dedicated to VoIP usage. For both incoming and
outgoing faxes, I'm getting a failure rate of just over 25%, and over a handful
of reasons.
Is it natural to have this many problems on a
I had the same problem for a while. I found replacing fax machines with a
scanner and either an email-to-fax program or just web-based faxing had
better results. I don't want to tell you the gateway I used because they
turned out pretty badly in the end. But there is hope!
- Logan
On Oct 4, 2012
Brett Lehrer wrote:
Hola,
I'm running Asterisk 1.8.11.1 and am connected to the nexVortex trunking
service over a DSL line solely dedicated to VoIP usage. For both incoming and
outgoing faxes, I'm getting a failure rate of just over 25%, and over a handful
of reasons.
I've never heard of
On 10/04/2012 09:29 PM, Brett Lehrer wrote:
I'm running Asterisk 1.8.11.1 and am connected to the nexVortex trunking
service over a DSL line solely dedicated to VoIP usage. For both incoming and
outgoing faxes, I'm getting a failure rate of just over 25%, and over a handful
of reasons.
Is
2012/10/4 Brett Lehrer brett.leh...@solarismed.com
I'm running Asterisk 1.8.11.1 and am connected to the nexVortex trunking
service over a DSL line solely dedicated to VoIP usage. For both incoming
and outgoing faxes, I'm getting a failure rate of just over 25%, and over a
handful of
On Thu, Oct 4, 2012 at 6:29 AM, Brett Lehrer brett.leh...@solarismed.comwrote:
I'm running Asterisk 1.8.11.1 and am connected to the nexVortex trunking
service over a DSL line solely dedicated to VoIP usage. For both incoming
and outgoing faxes, I'm getting a failure rate of just over 25%,
On 10/04/2012 09:27 AM, Carlos Alvarez wrote:
However I'd just suggest that you look at the business case for
screwing around with fax at all. As a society, if we had decided to
stop supporting this dead technology years ago, with all the time and
money we've collectively wasted we could have
What is the setup you're talking about ?
Is it something like this ?
PSTN nexVortex T.38 gateway - Internet - DSL modem ---
Asterisk Fax machine
Olivier,
Sorry, I did a poor job explaining that. That's basically correct, with the
receiving end first and our originating end
On Thu, Oct 4, 2012 at 10:06 AM, Lee Howard fax...@howardsilvan.com wrote:
I recognize that you're being a bit facetious in this latter comment
No, not really. I stand by it. Useless and *should* be dead. It's dead
and people just don't know it.
There is no adequate replacement for fax.
From: Carlos Alvarez car...@televolve.com
Sent: Thursday, October 04, 2012 1:18 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] Fax for Asterisk success rates?
On Thu, Oct 4
2012/10/4 Brett Lehrer brett.leh...@solarismed.com
What is the setup you're talking about ?
Is it something like this ?
PSTN nexVortex T.38 gateway - Internet - DSL modem ---
Asterisk Fax machine
Olivier,
Sorry, I did a poor job explaining that. That's basically correct,
: Patrick Lists asterisk-l...@puzzled.xs4all.nl
Subject: Re: [asterisk-users] FAX via Asterisk
To: asterisk-users@lists.digium.com
Date: Wednesday, September 26, 2012, 11:49 PM
On 09/26/2012 05:53 PM, Mark Robinson wrote:
Hello.
I have asterisk 1.8.18 which connects to ISDN PRI. All phones are sip
Am 27.09.2012 08:15, schrieb Shanavaz E A:
Patrick, can you please give the steps to configure fax with iaxmodem
and hylafax. Is it free to use?
I'm not Patrick, but here's a good how-to that worked perfectly for me.
In German, but it's basically enough just to type the commands :)
And yes,
On 09/27/2012 08:15 AM, Shanavaz E A wrote:
[snip]
Patrick, can you please give the steps to configure fax with iaxmodem
and hylafax. Is it free to use?
It's been years since I set it up so I don't know exactly how to
configure it anymore. But I do remember that I found some howto/docs via
Hello.
I have asterisk 1.8.18 which connects to ISDN PRI. All phones are sip,
Aastra 6757i. Everything works as expected.
We also have a FAX machine. We need to be able to use that FAX machine to
send or receive faxes. We are planning to have a dedicated did for faxes.
Before, FAX machine was
Am 26.09.2012 17:53, schrieb Mark Robinson:
I have asterisk 1.8.18 which connects to ISDN PRI. All phones are sip,
Aastra 6757i. Everything works as expected.
We also have a FAX machine. We need to be able to use that FAX machine
to send or receive faxes. We are planning to have a dedicated did
On 09/26/2012 05:53 PM, Mark Robinson wrote:
Hello.
I have asterisk 1.8.18 which connects to ISDN PRI. All phones are sip,
Aastra 6757i. Everything works as expected.
We also have a FAX machine. We need to be able to use that FAX machine
to send or receive faxes. We are planning to have a
Hi,
I'm fighting with HylaFAX, Asterisk and T38Modem since some time, to get
fax2mail and mail2fax working, my SIP-provider only supports T38 and
thus using G711 with IAXModem is not an option.
I have got running mail2fax with HylaFAX+ 5.5.0, Asterisk 1.4.20 and
T38Modem 2.0.0 successfull, but
On 02/12/2011 10:53 PM, Mark Willis wrote:
Is it possible to do SIP-Asterisk-TDM in a single step with FFA? Or
does FFA always use TIFF files?
I'm using Free FFA on 1.6.2.15 and I want to be able to use SPA 2102
ATA's at the fax machines and send faxes directly over a PRI.
Asterisk does not
Dear
I had good experience with asterisk + spandsp for sending and receiving
fax, if your ip phone supports fax, you need asterisk only as g711(no vad)
gateway.
best
On Sun, Feb 13, 2011 at 7:00 PM, Kevin P. Fleming kpflem...@digium.comwrote:
On 02/12/2011 10:53 PM, Mark Willis wrote:
Is it
Is it possible to do SIP-Asterisk-TDM in a single step with FFA? Or
does FFA always use TIFF files?
I'm using Free FFA on 1.6.2.15 and I want to be able to use SPA 2102
ATA's at the fax machines and send faxes directly over a PRI.
Mark
--
Mark Willis
Star One Telecom
Office: 1-800-889-7001
I've been replacing an old Toshiba DK switch with an Asterisk solution. I'm
needing a solution for fax machines that works as well as a POTS line from
my carrier. If the POTS line is the solution, I'll keep it, but I'd rather
move away from that.
Here's what I'm thinking...will it work?
I
On 08/03/2010 10:48 AM, Joel Maslak wrote:
I've been replacing an old Toshiba DK switch with an Asterisk solution. I'm
needing a solution for fax machines that works as well as a POTS line from
my carrier. If the POTS line is the solution, I'll keep it, but I'd rather
move away from that.
- Joel Maslak jmas...@antelope.net wrote:
I've been replacing an old Toshiba DK switch with an Asterisk solution. I'm
needing a solution for fax machines that works as well as a POTS line from my
carrier. If the POTS line is the solution, I'll keep it, but I'd rather move
away from
Joel Maslak wrote:
So...will this work?
It will work very well, I have two installations with ADIT600s
Doug
--
Ben Franklin quote:
Those who would give up Essential Liberty to purchase a little Temporary
Safety, deserve neither Liberty nor Safety.
--
so nobody seems to like dealing with fax!!
2010/7/12 khalid touati khalidtou...@gmail.com
Hi Guys,
i am using the latest version of asterisk 1.4 (1.4.33.1), dahdi (2.3.0.1)
and FFA (Applications: 1.4_1.2.0, Digium FAX Driver: 1.4_1.2.0). the issue
i'm having is that i'm able to receive faxes
- khalid touati khalidtou...@gmail.com wrote:
so nobody seems to like dealing with fax!!
'Fax for Asterisk' is a commercial application sold by Digium. This is not
their official support channel. Since you paid for the product, why not contact
them directly about your problem?
Hi!
'Fax for Asterisk' is a commercial application sold by Digium. This is
not their official support channel. Since you paid for the product, why
not contact them directly about your problem?
Maybe because having to deal with Digium support is an ... uncomfortable
experience that I've made
On Tue, Jul 13, 2010 at 4:43 PM, Philipp von Klitzing
klitz...@pool.informatik.rwth-aachen.de wrote:
Hi!
'Fax for Asterisk' is a commercial application sold by Digium. This is
not their official support channel. Since you paid for the product, why
not contact them directly about your
'Fax for Asterisk' is a commercial application sold by Digium. This is not
their official support channel. Since you paid for the product, why not
contact them directly about your problem?
i did get this version for free after buying a (actually several) digium
telephony card, but i realized that
] On Behalf Of Neeraj Chand
Sent: Thursday, December 17, 2009 8:36 PM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] FAX for Asterisk
Just finished with the instructions from digium website/ net on how to
compile FFA:
After restart, modules did not get loaded so tried to load
Just finished with the instructions from digium website/ net on how to
compile FFA:
After restart, modules did not get loaded so tried to load manually:
[Dec 18 14:31:26] WARNING[11002]: loader.c:359 load_dynamic_module:
Error loadin ile: No such file or directory
[Dec 18 14:31:26]
On Dec 17, 2009, at 10:36 PM, Neeraj Chand wrote:
Just finished with the instructions from digium website/ net on how to
compile FFA:
After restart, modules did not get loaded so tried to load manually:
[Dec 18 14:31:26] WARNING[11002]: loader.c:359 load_dynamic_module:
Error loadin
Cyprus VoIP wrote:
Yes. I saw the message and the required addition in the sip.conf. The
problem is that if I set it to 72, other terminating gateways that
support 400 or more would also be limited to 72.
This is incorrect. First, you would not set it to 72, since the endpoint
is already
Cyprus VoIP wrote:
This is the reINVITE SDP received from the SIP Proxy:
---
Content-Type: application/sdp
Content-Length: 353
v=0
o=root 30427 30428 IN IP4 194.98.xxx.xxx
s=session
c=IN IP4 194.98.xxx.xxx
t=0 0
m=image 17548 udptl t38
a=T38FaxVersion:0
a=T38MaxBitRate:14400
-users] Fax throughput - Asterisk 1.6.1.9
From: Cyprus VoIP voi...@gmail.com
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Date: Friday, 04 December, 2009 18:21:59
It's probably because you are using 1.6.1.9; that release (and older)
had a 'feature
Cyprus VoIP wrote:
This is the reINVITE SDP received from the SIP Proxy:
---
Content-Type: application/sdp
Content-Length: 353
v=0
o=root 30427 30428 IN IP4 194.98.xxx.xxx
s=session
c=IN IP4 194.98.xxx.xxx
t=0 0
m=image 17548 udptl t38
a=T38FaxVersion:0
a=T38MaxBitRate:14400
Cyprus VoIP wrote:
This is the reINVITE SDP received from the SIP Proxy:
---
Content-Type: application/sdp
Content-Length: 353
v=0
o=root 30427 30428 IN IP4 194.98.xxx.xxx
s=session
c=IN IP4 194.98.xxx.xxx
t=0 0
m=image 17548 udptl t38
a=T38FaxVersion:0
Cyprus VoIP wrote:
Thank you for your answer. The 'internal extension' is indeed a T.38
capable device that works perfectly when connected directly to the
Proxy/ITSP.
As you said, the key to debugging/resolving this issue is the logger. I
wasn't aware of this file. this is what I have
Set 'canreinvite=no' on all applicable peers?
I tried with yes and no. No difference. I'm almost certain it's related
to the Keeping RTP active during T.38 session issue.
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Cyprus VoIP wrote:
So, I enabled the full logger, and the strange thing I see is this message:
Got T.38 Re-invite without audio. Keeping RTP active during T.38 session
It seems that this might be the reason Asterisk initiates a reINVITE
with voice codecs, after connecting the 2 parties.
Cyprus VoIP wrote:
So, I enabled the full logger, and the strange thing I see is this message:
Got T.38 Re-invite without audio. Keeping RTP active during T.38 session
It seems that this might be the reason Asterisk initiates a reINVITE
with voice codecs, after connecting the 2 parties.
Cyprus VoIP wrote:
If it's not related, why does Asterisk send again INVITE messages to
both parties? How can this be prevented? I don't see more debug data
prior to the new INVITE.
It's probably because you are using 1.6.1.9; that release (and older)
had a 'feature' that allowed automatic
It's probably because you are using 1.6.1.9; that release (and older)
had a 'feature' that allowed automatic switching back to audio from T.38
if one of the endpoints sent an audio packet. It turns out that wasn't a
good idea, and it's been removed... but in later versions. You'll have
to
Hello,
We are trying to send faxes by T.38 protocol to a remote SIP proxy from
a local extension. The local extension sends the INVITE, Asterisk sends
the call to the Proxy the call is connected with a regular audio codec.
After a few seconds the remote proxy sends an INVITE with UDPTL and the
Cyprus VoIP wrote:
We set t38pt_udptl=yes in sip.conf and allowed all the codecs to the
local extension and remote Proxy, but it still forces the call to go
back to a voice call.
Define 'internal extension'. Is this a T.38-capable device? If not,
Asterisk doesn't support TDM-to-T.38 FAX
Cyprus VoIP wrote:
We set t38pt_udptl=yes in sip.conf and allowed all the codecs to the
local extension and remote Proxy, but it still forces the call to go
back to a voice call.
That's correct behavior if T.38 cannot autonegotiate.
What happens in the reverse direction, trying to send faxes
We set t38pt_udptl=yes in sip.conf and allowed all the codecs to the
local extension and remote Proxy, but it still forces the call to go
back to a voice call.
Define 'internal extension'. Is this a T.38-capable device? If not,
Asterisk doesn't support TDM-to-T.38 FAX relay (yet). If it
Cyprus VoIP wrote:
Thank you for your answer. The 'internal extension' is indeed a T.38
capable device that works perfectly when connected directly to the
Proxy/ITSP.
As you said, the key to debugging/resolving this issue is the logger. I
wasn't aware of this file. this is what I have
Set 'canreinvite=no' on all applicable peers?
Cyprus VoIP wrote:
Hello,
We are trying to send faxes by T.38 protocol to a remote SIP proxy from
a local extension. The local extension sends the INVITE, Asterisk sends
the call to the Proxy the call is connected with a regular audio codec.
...@lists.digium.com]*de la part de* Joan Antoni Terre
*Envoyé :* mercredi 9 septembre 2009 00:43
*À :* Asterisk Users Mailing List - Non-Commercial Discussion
*Objet :* Re: [asterisk-users] Fax For Asterisk and SendFax question
thanks Danny,
just another stupid question, as far as I know, when a call
On Tuesday 08 September 2009, Joan Antoni Terre wrote:
I've installed Free Fax For Asterisk in my Asterisk box but I don't
understand how it works as when using SendFax application from
dialplan, I can't find how to introduce destination fax number.
How this application works? Do I have to
-Commercial Discussion
Subject: Re: [asterisk-users] Fax For Asterisk and SendFax question
thanks Danny,
just another stupid question, as far as I know, when a call is answered
after Dial application, it doesn't execute other dialplan priorities until
it's hung up, which execute h priority
: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com]de la part de Joan Antoni
Terre
Envoyé : mercredi 9 septembre 2009 00:43
À : Asterisk Users Mailing List - Non-Commercial Discussion
Objet : Re: [asterisk-users] Fax For Asterisk and SendFax question
: Tuesday, September 08, 2009 4:52 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Fax For Asterisk and SendFax question
Hi everybody,
I've installed Free Fax For Asterisk in my Asterisk box but I don't
understand how it works as when using SendFax
Hi everybody,
I've installed Free Fax For Asterisk in my Asterisk box but I don't
understand how it works as when using SendFax application from dialplan, I
can't find how to introduce destination fax number.
How this application works? Do I have to call destination fax using Dial
application,
-users-boun...@lists.digium.com] *On Behalf Of *Joan Antoni Terre
*Sent:* Tuesday, September 08, 2009 4:52 PM
*To:* Asterisk Users Mailing List - Non-Commercial Discussion
*Subject:* [asterisk-users] Fax For Asterisk and SendFax question
Hi everybody,
I've installed Free Fax For Asterisk
that it is a fax or
just assume so.
From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com
] On Behalf Of Joan Antoni Terre
Sent: Tuesday, September 08, 2009 4:52 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Fax
Thank you guys, for this clarification...
Arturo Ochoa
Electrosystems
2009/7/28 Kevin P. Fleming kpflem...@digium.com
Miguel Molina wrote:
Counting that everything works well on the IP portion of the
communication, you might have something, but the store and forward
process that has
Miguel Molina wrote:
Counting that everything works well on the IP portion of the
communication, you might have something, but the store and forward
process that has to be made twice to emulate a T.38 gateway on both
asterisks would make it a very slow process to send a single fax, having
Hi guys, I have this question:
Can asterisk + fax for asterisk do this ?? Send Fax on Machine A to Fax
machine B??
Fax Machine A-- FXS port on digium card -- asterisk 1.6 -- Sip with t.38
-- internet -- Sip with t.38 -- asterisk 1.6 -- FXS port -- Fax Machine
B
I've been reading
The results are most unlikely to be pleasant.
arturo arturo wrote:
Hi guys, I have this question:
Can asterisk + fax for asterisk do this ?? Send Fax on Machine A to
Fax machine B??
Fax Machine A-- FXS port on digium card -- asterisk 1.6 -- Sip with
t.38 -- internet -- Sip with
Alex Balashov escribió:
The results are most unlikely to be pleasant.
arturo arturo wrote:
Hi guys, I have this question:
Can asterisk + fax for asterisk do this ?? Send Fax on Machine A to
Fax machine B??
Fax Machine A-- FXS port on digium card -- asterisk 1.6 -- Sip with
t.38
2009/7/7 Doug Lytle supp...@drdos.info
Olivier wrote:
Please, allow me to ask what is this Transmitting Station ID ?
Google is you friend:
http://encyclopedia.thefreedictionary.com/Transmitting+Subscriber+Identification
Thanks !
I still have to improve my googling !
Doug
I'm using Fax For Asterisk, and trying to optimize the user experience while
ROUTING faxes based on the Transmitting Station ID [sic] (NOT the CALLERID).
Specifically I'm trying to eliminate end-user confusion as that fifty page
fax spools to a file, creating a significant delay, leaving the
-Commercial Discussion
Subject: [asterisk-users] Fax for Asterisk - Fax routing based on TSID
I'm using Fax For Asterisk, and trying to optimize the user experience while
ROUTING faxes based on the Transmitting Station ID [sic] (NOT the CALLERID).
Specifically I'm trying to eliminate end-user confusion
Karl Fife wrote:
However if I were to drive the fax process from manager rather than from the
dialplan, would the TSID be available for read before RX completion, AND
(equally important) would sendfax even tolerate sending a fax from an
still-spooling RX file? In other words, does the
2009/7/7 Karl Fife karlf...@gmail.com
I'm using Fax For Asterisk, and trying to optimize the user experience
while
ROUTING faxes based on the Transmitting Station ID [sic] (NOT the
CALLERID).
Please, allow me to ask what is this Transmitting Station ID ?
Thanks
-Karl
Olivier wrote:
Please, allow me to ask what is this Transmitting Station ID ?
Google is you friend:
http://encyclopedia.thefreedictionary.com/Transmitting+Subscriber+Identification
Doug
--
Ben Franklin quote:
Those who would give up Essential Liberty to purchase a little Temporary
In what appears to be the most current documentation of FFA I'm directed to
http://www.digium.com/en/docs/FAX/faa-download.php
However the download selector utility found there ain't working.
Specifically, none of the drop lists appear to be populated (in any browser,
on any platform), thereby
On Sunday 05 July 2009 08:15:17 Karl Fife wrote:
In what appears to be the most current documentation of FFA I'm directed to
http://www.digium.com/en/docs/FAX/faa-download.php
However the download selector utility found there ain't working.
Specifically, none of the drop lists appear to be
Tilghman Lesher wrote:
You can download the needed components directly from the download site here:
http://downloads.digium.com/pub/telephony/fax/
You'll need to download both res_fax and res_fax_digium. The only guesswork
entails figuring out your processor, as there are
On Thu, Sep 25, 2008 at 7:34 AM, Rizwan Hisham [EMAIL PROTECTED] wrote:
The fax is originated from a fax machine connected to an ata which supports
t38.
That would be great if Asterisk had true T.38 support. It can pass the
T.38 packets it receives to another SIP endpoint (it will do this even
The fax is originated from a fax machine connected to an ata which supports
t38.
On Wed, Sep 24, 2008 at 11:54 PM, C F [EMAIL PROTECTED] wrote:
On Wed, Sep 24, 2008 at 5:43 AM, Rizwan Hisham [EMAIL PROTECTED]
wrote:
Hi all,
Sorry to interrupt. I need some help regarding fax passthru mode.
Hi all,
Sorry to interrupt. I need some help regarding fax passthru mode.
We are trying to configure fax passthru mode in asterisk using sip. For out
of network calls/fax we use trunk configuration. i am using asterisk
1.4.2.The user has to use fax machine connected to their ata and dial
the
On Wed, Sep 24, 2008 at 5:43 AM, Rizwan Hisham [EMAIL PROTECTED] wrote:
Hi all,
Sorry to interrupt. I need some help regarding fax passthru mode.
We are trying to configure fax passthru mode in asterisk using sip. For out
of network calls/fax we use trunk configuration. i am using asterisk
Hi!
I'm new to this list. I tried to search the list archive for a
solution on my current setup, but couldn't find any.
We have an asterisk connected directly to the PSTN with 2 E1 lines
through a Sangoma A102d interface. We also have a regular FAX machine.
My question is how to get the fax
Hi Erik,
we use an ATA device connected to the fax machine. If you want to
receive faxes, since Asterisk fax detection is not reliable, use one DID
to link it directly to the ATA: you lose a number but you gain a
fully-working fax!
Giorgio Incantalupo.
Erik Haider Forsen wrote:
Hi!
I'm new
2008/9/23 Giorgio Incantalupo [EMAIL PROTECTED]
Hi Erik,
we use an ATA device connected to the fax machine. If you want to
receive faxes, since Asterisk fax detection is not reliable
Hi,
Which fax detection did you used, then ?
, use one DID
to link it directly to the ATA: you lose a
I have an TDM800P+ata+fax and work fine. This setup take 5 min.
The best solution must be hylax fax + asterisk. But you need an
asterisk specialist to make the setup and take more time. With this
solution you can send fax and receive fax in your inbox and reduce
toner/papper costs.
Regards,
Hi Olivier,
We DO NOT use faxdetect because it does not work properly. That's why we
link a PRI DID to it, so when people call that DID the fax machine gets
direct fax data without passing thru faxdetection.
Giorgio Incantalupo.
Olivier wrote:
2008/9/23 Giorgio Incantalupo [EMAIL
Hey Erik,
You can also check out pika technologies which supply chan_pika. This comes
with a fax application that will let you do your faxes in asterisk (even
using non-pika boards). Works pretty good...
pikatechnologies.com
mattm
On Tue, Sep 23, 2008 at 4:51 AM, Erik Haider Forsen [EMAIL
Hi Giorgio,
Thanks for your answer.
Your setup is exactly what we're thinking of. We have 1100 DID's, so
that shouldn't be a problem at all. Which ATA box are you using?
Erik
On Sep 23, 2008, at 2:06 PM, Giorgio Incantalupo wrote:
Hi Olivier,
We DO NOT use faxdetect because it does not
Hi Matthew,
Thanks for your suggestion. The problem is that most of our users
would not feel comfortable with using software fax solutions. So we
will have to stick with the old fax machine.
Our reception takes care of the fax machine, receiving and sending
faxes. This one fax is shared by
ATAs work OK I guess, just make sure to use a loss less codec such as ULAW.
Personally, I would install a single port FXS card in the Asterisk
server to avoid any IP transport. You may have to mess with the gains
to get it working very well, but nothing beats your existing POTS
line.
If you had
Just to clarify, pika's chan_pika is their asterisk channel driver for their
hardware. The two fax applications, app_pikarxfax.so and app_pikatxfax.so
are fax modules for asterisk to implement fax in your dialplan:
exten = 5001,1,Answer(1000);
exten = 5001,n,Set(LOCALSTATIONID=123456789)
exten =
Forgot to mention (I think) that though the chan_pika driver is for pika
hardware, the two fax apps for asterisk work with 3rd party hardware as
well, so you don't actually need the pika cards (that's why it's nice and
easy)
On Tue, Sep 23, 2008 at 10:23 AM, Matthew Marion [EMAIL PROTECTED]wrote:
Hi Erik,
once we used grandstream ATAs but now we are using linksys models: it
has better design (look is important too for customers) and has 2 ports
for two analog devices. We tested it with PRI and BRI lines and it seems
working fine!
Giorgio Incantalupo
Erik Haider Forsen wrote:
Hi
On Tue, Sep 23, 2008 at 10:02 AM, Steve Totaro
[EMAIL PROTECTED] wrote:
ATAs work OK I guess, just make sure to use a loss less codec such as ULAW.
Since the OP stated he is using E1 lines then he should probably be
using alaw instead.
___
--
On Tue, 4 Dec 2007 20:45:08 -0500 (EST), Alex Balashov wrote:
This sounds like the app_rxfax module has a dependency on some other
module which implements T.30 handling, and that this module is either
not loaded, or that its symbol table is not being shared in the
monolithic core.
there's
Hi people,
I'm tring to configure fax on my asterisk server. I'm using the
instructions of: http://www.asteriskguru.com/tutorials/spandsp.html and
the files app_rxfax.c, app_txfax.c and apps_Makefile_patch from:
http://www.soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.2/
I
Everton,
This sounds like the app_rxfax module has a dependency on some other
module which implements T.30 handling, and that this module is either
not loaded, or that its symbol table is not being shared in the monolithic
core.
-- Alex
On Tue, 4 Dec 2007, Everton Goularth wrote:
Hi
Dear all
I have fax machine which is connected with audiocode FXS port
and audiocode connected with my asterisk server now what configuration i have
to configured on asterisk ?? can any one suggest me what would be best for this
kind of setup ??
- Lee Howard [EMAIL PROTECTED] wrote:
Andrew Nowrot wrote:
I am trying to build reliable fax solution with asterisk, iaxmodem
and
hylafax. I am attempting to do this on Compaq DL-360 with 2 pentium
3
1.2 GHz (512 cache) and 2GB of RAM. I am using a Sangoma A101. After
Hi
I am trying to build reliable fax solution with asterisk, iaxmodem and
hylafax. I am attempting to do this on Compaq DL-360 with 2 pentium 3
1.2GHz (512 cache) and 2GB of RAM. I am using a Sangoma A101. After
installing
the newest zaptel and wanpipe-3.1.0 beta I did zttest and it didn't give
Andrew Nowrot wrote:
I am trying to build reliable fax solution with asterisk, iaxmodem and
hylafax. I am attempting to do this on Compaq DL-360 with 2 pentium 3
1.2 GHz (512 cache) and 2GB of RAM. I am using a Sangoma A101. After
installing the newest zaptel and wanpipe-3.1.0 beta I did
On Sat, Jul 07, 2007 at 08:29:57PM +0200, Andrew Nowrot wrote:
Hi
I am trying to build reliable fax solution with asterisk, iaxmodem and
hylafax. I am attempting to do this on Compaq DL-360 with 2 pentium 3
1.2GHz (512 cache) and 2GB of RAM. I am using a Sangoma A101. After
installing
the
1 - 100 of 161 matches
Mail list logo
