Hi all
Does anyone have working settings for a audiocodes fxs gateway behind a
firewall to send faxes
thru asterisk not behind nat
i have tried multiple settings and haven't gotten it to work even partially
thanks,
israel
--
_
On Tue, Dec 20, 2016, at 12:21 PM, Bryant Zimmerman wrote:
> I am working on moving from version 11 to version 13 for my fax
> applications.
> We are bumping into an issue where the bulk of the T38 faxes are
> failing.
>
> The sending test switch is reporting COMREC_ERR_TRANSMIT_PHASE
>
>
I am working on moving from version 11 to version 13 for my fax
applications.
We are bumping into an issue where the bulk of the T38 faxes are failing.
The sending test switch is reporting COMREC_ERR_TRANSMIT_PHASE
These same faxes succeed on the 11 version of asterisk.
I am wondering if
From: kevin.lar...@pioneerballoon.com [mailto:kevin.lar...@pioneerballoon.com]
Sent: Tuesday, 29 November, 2016 5:24 PM
To: ha...@mayorcom.com; Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users@lists.digium.com>
Subject: Re: [asterisk-users] FAX CNG detected but no f
: [asterisk-users] FAX CNG detected but no fax extension
Hello,
I have a question regarding incoming fax to local file (on the Asterisk
server).
While the fax is received properly (I have the tiff file generated as
expected) I get the warning 'FAX CNG detected but no fax extension' on the
consol
> Hello,
> I have a question regarding incoming fax to local file (on the
> Asterisk server).
> While the fax is received properly (I have the tiff file generated
> as expected) I get the warning 'FAX CNG detected but no fax
> extension' on the consol.
>
> If the fax is received ok then what
Hello,
I have a question regarding incoming fax to local file (on the Asterisk server).
While the fax is received properly (I have the tiff file generated as expected)
I get the warning 'FAX CNG detected but no fax extension' on the consol.
If the fax is received ok then what 'fax extension'
I tested my fax extension with some fax machines and they worked. I
then pointed a client at it and the first two fax machines they tried
to send to failed with the following error.
WARNING[-1][C-00022893] res_rtp_asterisk.c: RTP Read too short
I am wondering if there might be some
On 2/24/16 12:10 PM, Aziz TestAccount wrote:
Hi All,
I'm looking for a PSTN Card that I can use with my Asterisk Server to
achieve the following goal :
1. Detect FAX signal and route it to a specific extension.
2. Detect an incoming call from the same PSTN line and route it to IVR.
Do
Perhaps use T38 instead? Would make your life a lot easier. (And you can use
a T38modem software).
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory
Hi
I have used sangoma cards, but I know that openvox, is shipper than Sangoma.
On Wed, Feb 24, 2016 at 1:10 PM, Aziz TestAccount
wrote:
> Hi All,
>
> I'm looking for a PSTN Card that I can use with my Asterisk Server to
> achieve the following goal :
>
> 1. Detect FAX
Hi All,
I'm looking for a PSTN Card that I can use with my Asterisk Server to
achieve the following goal :
1. Detect FAX signal and route it to a specific extension.
2. Detect an incoming call from the same PSTN line and route it to IVR.
Do openvox FXO/FXS cards support this feature ? Is there
Hi,
I am trying to add header to fax while sending fax. I can add some
information to header but some information added automatically (date and
page count). I want to format this information.
Header = Date | ${LOCALHEADERINFO} | ${FAXOPT(localstationid)} | Page Count
I can set LOCALHEADERINFO
All;
I'm running Asterisk 1.8.15-cert3 with the newest version of spandsp.
I've even tried unloading that and using Digium's FFA module but I receive
the same error on an outbound transmission:
[2014-02-06 14:35:14] ERROR[19066]: udptl.c:294 encode_open_type: UDPTL
On 7/02/2014 3:38 AM, Tech Support wrote:
All;
I’m running Asterisk 1.8.15-cert3 with the newest version of spandsp.
I’ve even tried unloading that and using Digium’s FFA module but I
receive the same error on an outbound transmission:
[2014-02-06 14:35:14] ERROR[19066]: udptl.c:294
I receive several calls from this scamer: Senior SafeAlert
It is an automated call and they keep rotating their caller ID so it is harder
to block them.
Does asterisk have a fax sound tone? If I block their number and play fax
tone/sound maybe they will remove me from their calling list.
I've
Why dont u run a reverse dialer on the admin contacts phone number. Leave
him clueless as well.
Mitul
On Apr 5, 2013 1:25 AM, Joseph syscon...@gmail.com wrote:
I receive several calls from this scamer: Senior SafeAlert
It is an automated call and they keep rotating their caller ID so it is
On 04/05/13 01:29, Mitul Limbani wrote:
Why dont u run a reverse dialer on the admin contacts phone number.
Leave him clueless as well.
Mitul
Reverse dialer on 7044972383 ?
What is going to do?
--
Joseph
On Apr 5, 2013 1:25 AM, Joseph [1]syscon...@gmail.com wrote:
I
It is an automated call and they keep rotating their caller ID so it is
harder to block them.
Automate it.
We have an extension that the operators forward calls to that add the number to
the black list database.
Doug
--
Ben Franklin quote:
Those who would give up Essential Liberty to
On 04/04/13 16:21, Doug Lytle wrote:
It is an automated call and they keep rotating their caller ID so it is harder
to block them.
Automate it.
We have an extension that the operators forward calls to that add the number to
the black list database.
Doug
Can you please share more details,
Can you please share more details, is it done via dial plan?
I'll post a portion of my dial plan when I get home from work. It's currently
for Asterisk 1.4 using the mysql command, I'm in the process of moving it to
Asterisk 11 and func_odbc.
Doug
--
Ben Franklin quote:
Those who would
On Thu, 4 Apr 2013, Joseph wrote:
I receive several calls from this scamer:...
Does asterisk have a fax sound tone? If I block their number and play
fax tone/sound maybe they will remove me from their calling list.
The fax CNG may work. How about SIT?
On 04/04/2013 09:54 PM, Joseph wrote:
+1.7044972383
If that number is his actual number, maybe create a script that calls
him 10 times an hour, every hour between 00:00 - 07:00am and plays
screaming monkeys every time he picks up (or his voicemail kicks in).
Regards,
Patrick
--
On 04/05/13 00:58, Patrick Lists wrote:
On 04/04/2013 09:54 PM, Joseph wrote:
+1.7044972383
If that number is his actual number, maybe create a script that calls
him 10 times an hour, every hour between 00:00 - 07:00am and plays
screaming monkeys every time he picks up (or his voicemail kicks
Joseph wrote:
Can you please share more details, is it done via dial plan?
We use extension 2000.
You'll need to added the 'check_blacklist' sub-routine to the inbound
parts of your dial plan.
[tele_torture]
exten = 2000,1,GotoIf($[${CALLERID(number)} = 0]?7:2)
exten =
On Mon, Nov 5, 2012 at 10:43 PM, Vladimir Mikhelson v...@mikhelson.comwrote:
My practical experience shows otherwise. I am able to receive faxes on
SIP lines pretty reliably with no T.38 support. The biggest issue for
me is CED tones detection. If CED is detected then fax reception goes
I got it working so thought I'd follow up!
Here is what I had to do...
I'm using Actuate 11 and had res_fax support already
I had to download, compile, and install res_fax_digium
I had to order a Free Fax License from digium for 1 channel
I had to change faxdetect=yes to faxdetect=cng in
Roy,
Congratulations!
One comment and one question.
1. I would consider increasing Wait from 2 to 3 or maybe even 4 seconds
for more reliable CED detection. Some fax machines produce CED
tones not that frequently.
2. What kind of error dd you receive with faxdetect=yes in sip.conf?
What is the best way for me to setup Fax Capability with VOIP only.
I have a Asterisk Server hosted on the internet without a modem. I'm
using Flowroute, which is working awesome, for VOIP calls.
I only have a SIP Phone at home and two Printer/Scanner/Fax Printers.
I'm not sure which Fax
On 11/05/2012 04:18 PM, Roy Abshire wrote:
What is the best way for me to setup Fax Capability with VOIP only.
You can use T.38, perhaps, if your VoIP provider supports it and you can
get it working. But unless you need faxes to go through the telephony
system (i.e. you have fax machines
Roy,
Many will say that it all depends on your provider supporting T.38, and
that you should forget it otherwise.
My practical experience shows otherwise. I am able to receive faxes on
SIP lines pretty reliably with no T.38 support. The biggest issue for
me is CED tones detection. If CED is
On 10/09/2012 12:28 AM, Brett Lehrer wrote:
How many fax and voice calls (which codecs for tha latter ones ?) are on
average using your DSL line ?
1. Previously, I experienced failures during the process of converting
incoming PDF documents into ready-to-send fax image files while the reverse
On 10/09/2012 07:40 AM, Steve Underwood wrote:
On 10/09/2012 12:28 AM, Brett Lehrer wrote:
How many fax and voice calls (which codecs for tha latter ones ?) are on
average using your DSL line ?
1. Previously, I experienced failures during the process of converting
incoming PDF documents into
How many fax and voice calls (which codecs for tha latter ones ?) are on
average using your DSL line ?
1. Previously, I experienced failures during the process of converting
incoming PDF documents into ready-to-send fax image files while the reverse
process (from a fax file into a PDF or whatever
I'm running Asterisk 1.8.11.1 and am connected to the nexVortex trunking
service over a DSL line solely dedicated to VoIP usage. For both incoming and
outgoing faxes, I'm getting a failure rate of just over 25%, and over a handful
of reasons.
Is it natural to have this many problems on a
I had the same problem for a while. I found replacing fax machines with a
scanner and either an email-to-fax program or just web-based faxing had
better results. I don't want to tell you the gateway I used because they
turned out pretty badly in the end. But there is hope!
- Logan
On Oct 4, 2012
Brett Lehrer wrote:
Hola,
I'm running Asterisk 1.8.11.1 and am connected to the nexVortex trunking
service over a DSL line solely dedicated to VoIP usage. For both incoming and
outgoing faxes, I'm getting a failure rate of just over 25%, and over a handful
of reasons.
I've never heard of
On 10/04/2012 09:29 PM, Brett Lehrer wrote:
I'm running Asterisk 1.8.11.1 and am connected to the nexVortex trunking
service over a DSL line solely dedicated to VoIP usage. For both incoming and
outgoing faxes, I'm getting a failure rate of just over 25%, and over a handful
of reasons.
Is
2012/10/4 Brett Lehrer brett.leh...@solarismed.com
I'm running Asterisk 1.8.11.1 and am connected to the nexVortex trunking
service over a DSL line solely dedicated to VoIP usage. For both incoming
and outgoing faxes, I'm getting a failure rate of just over 25%, and over a
handful of
On Thu, Oct 4, 2012 at 6:29 AM, Brett Lehrer brett.leh...@solarismed.comwrote:
I'm running Asterisk 1.8.11.1 and am connected to the nexVortex trunking
service over a DSL line solely dedicated to VoIP usage. For both incoming
and outgoing faxes, I'm getting a failure rate of just over 25%,
On 10/04/2012 09:27 AM, Carlos Alvarez wrote:
However I'd just suggest that you look at the business case for
screwing around with fax at all. As a society, if we had decided to
stop supporting this dead technology years ago, with all the time and
money we've collectively wasted we could have
What is the setup you're talking about ?
Is it something like this ?
PSTN nexVortex T.38 gateway - Internet - DSL modem ---
Asterisk Fax machine
Olivier,
Sorry, I did a poor job explaining that. That's basically correct, with the
receiving end first and our originating end
On Thu, Oct 4, 2012 at 10:06 AM, Lee Howard fax...@howardsilvan.com wrote:
I recognize that you're being a bit facetious in this latter comment
No, not really. I stand by it. Useless and *should* be dead. It's dead
and people just don't know it.
There is no adequate replacement for fax.
From: Carlos Alvarez car...@televolve.com
Sent: Thursday, October 04, 2012 1:18 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] Fax for Asterisk success rates?
On Thu, Oct 4
2012/10/4 Brett Lehrer brett.leh...@solarismed.com
What is the setup you're talking about ?
Is it something like this ?
PSTN nexVortex T.38 gateway - Internet - DSL modem ---
Asterisk Fax machine
Olivier,
Sorry, I did a poor job explaining that. That's basically correct,
: Patrick Lists asterisk-l...@puzzled.xs4all.nl
Subject: Re: [asterisk-users] FAX via Asterisk
To: asterisk-users@lists.digium.com
Date: Wednesday, September 26, 2012, 11:49 PM
On 09/26/2012 05:53 PM, Mark Robinson wrote:
Hello.
I have asterisk 1.8.18 which connects to ISDN PRI. All phones are sip
Am 27.09.2012 08:15, schrieb Shanavaz E A:
Patrick, can you please give the steps to configure fax with iaxmodem
and hylafax. Is it free to use?
I'm not Patrick, but here's a good how-to that worked perfectly for me.
In German, but it's basically enough just to type the commands :)
And yes,
On 09/27/2012 08:15 AM, Shanavaz E A wrote:
[snip]
Patrick, can you please give the steps to configure fax with iaxmodem
and hylafax. Is it free to use?
It's been years since I set it up so I don't know exactly how to
configure it anymore. But I do remember that I found some howto/docs via
Hello.
I have asterisk 1.8.18 which connects to ISDN PRI. All phones are sip,
Aastra 6757i. Everything works as expected.
We also have a FAX machine. We need to be able to use that FAX machine to
send or receive faxes. We are planning to have a dedicated did for faxes.
Before, FAX machine was
Am 26.09.2012 17:53, schrieb Mark Robinson:
I have asterisk 1.8.18 which connects to ISDN PRI. All phones are sip,
Aastra 6757i. Everything works as expected.
We also have a FAX machine. We need to be able to use that FAX machine
to send or receive faxes. We are planning to have a dedicated did
On 09/26/2012 05:53 PM, Mark Robinson wrote:
Hello.
I have asterisk 1.8.18 which connects to ISDN PRI. All phones are sip,
Aastra 6757i. Everything works as expected.
We also have a FAX machine. We need to be able to use that FAX machine
to send or receive faxes. We are planning to have a
.
-Original Message-
From: asterisk-users-boun...@lists.digium.com [mailto:
asterisk-users-boun...@lists.digium.com] On Behalf Of Olivier
Sent: Thursday, September 13, 2012 6:20 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Fax Detect on Demand
: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Olivier
Sent: Friday, September 14, 2012 10:19 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Fax Detect on Demand
2012/9/13 Eric Wieling ewiel
2012/9/13 bilal ghayyad bilmar...@yahoo.com
Hi All;
Is there a module (addon or already built in) that enable us to receive
the fax on the telephony card and save it as image (or any other format)
and sent it to email?
have a look at receivefax (core show application ReceiveFAX)
: [asterisk-users] FAX detection in chan_dahdi 1.8.15
Hi,
I recently replaced a site that was using 1.4.[mumble] with
hylafax/iaxmodem. They have an RBS T1 and were using about half of
their 50
DID numbers for fax to email. This all broke with the new system :(
The original
2012/8/16 Eric Wieling ewiel...@nyigc.com
Using Asterisk 1.8.mumble. We would like to use fax detect on demand.
Both chan_dahdi and chan_sip support setting fax detetect on a static
basis,
For curiosity's sake, could you make it work first using static settings ?
but no way I've been
mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Jeff
LaCoursiere
Sent: Tuesday, August 28, 2012 3:24 PM
To: asterisk-users@lists.digium.com
mailto:asterisk-users@lists.digium.com
Subject: [asterisk-users] FAX detection in chan_dahdi 1.8.15
Hi
Discussion
Subject: Re: [asterisk-users] Fax Detect on Demand
2012/8/16 Eric Wieling ewiel...@nyigc.com
Using Asterisk 1.8.mumble. We would like to use fax detect on demand.
Both chan_dahdi and chan_sip support setting fax detetect on a static
basis,
For curiosity's sake
Hi All;
Is there a module (addon or already built in) that enable us to receive the fax
on the telephony card and save it as image (or any other format) and sent it to
email?
Regards
Bilal
--
_
-- Bandwidth and Colocation
@lists.digium.com
Subject: [asterisk-users] Fax and sending to mail
Hi All;
Is there a module (addon or already built in) that enable us to receive the
fax on the telephony card and save it as image (or any other format) and
sent it to email?
Regards
Bilal
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Jeff
LaCoursiere
Sent: Tuesday, August 28, 2012 3:24 PM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] FAX detection in chan_dahdi 1.8.15
Hi,
I recently replaced a site that was using 1.4.[mumble] with
hylafax/iaxmodem. They have an RBS T1 and were using about half of
their 50 DID numbers for fax to email. This all broke with the new
system :(
The original chan_dahdi.conf had no mention of faxdetect, so I assume
it was
: Tuesday, August 28, 2012 3:24 PM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] FAX detection in chan_dahdi 1.8.15
Hi,
I recently replaced a site that was using 1.4.[mumble] with
hylafax/iaxmodem. They have an RBS T1 and were using about half of their 50
DID numbers for fax
Hi,
I recently replaced a site that was using 1.4.[mumble] with
hylafax/iaxmodem. They have an RBS T1 and were using about half of
their 50 DID numbers for fax to email. This all broke with the new
system :(
The original chan_dahdi.conf had no mention of faxdetect, so I assume
it was
Using Asterisk 1.8.mumble. We would like to use fax detect on demand.
Both chan_dahdi and chan_sip support setting fax detetect on a static basis,
but no way I've been able to find to enable/disable it on demand in the
dialplan.
In 1.4 we used the NVFaxDetect 3rd party app, but that no longer
- Original Message -
From: Thorben Jensen i...@thorben.dk
To: asterisk-users asterisk-users@lists.digium.com
Sent: Wednesday, June 20, 2012 8:25:28 PM
Subject: [asterisk-users] Fax setup T.38 Help needed
Hi,
I'm looking for someone who can help us setup Fax with T. 38
Hi,
I'm looking for someone who can help us setup Fax with T. 38 on asterisk
10.x.x - We need to be able to do FoIP (Fax over IP) as we have no pstn
lines available.
Do you know how to setup a reliable fax system, then we will pay you to
help us do this.
Regards
Thorben
--
Hi,
I am using asterisk 1.8.9.3 , I am using Spandsp FAX Driver: 20091228
123351, i will clearly explain my scenario.
I am sending fax to a anlog fax machine which is connected to mediatrix
analog gateway. say the analog fax extension is 18260.
I have enabled the fax mode , T.38 codec,
On Tue, Jun 5, 2012 at 12:47 PM, Ahmed Munir ahmedmunir...@gmail.comwrote:
I figured out the problem. Actually the sending fax machine speed was set
as 33000 bps, later I set to 14400 bps and in my dial plan, I forcefully
set to use T.38 protocol. After that I was able to receive fax.
Thanks
Hi Tim,
I'm using Asterisk 10 and on Cisco GW the protocol is set for FAX is T.38
and when I try to send the fax from a fax machine i.e. HP 3180, I'm getting
some warnings as listed below;
-- Executing [4112345678@default:1] Goto(SIP/192.168.1.69-0005,
fax-detect,fax,1) in new stack
- Original Message -
Hi Tim,
I'm using Asterisk 10 and on Cisco GW the protocol is set for FAX is
T.38 and when I try to send the fax from a fax machine i.e. HP 3180,
I'm getting some warnings as listed below;
-- Executing [4112345678@default:1] Goto(SIP/192.168.1.69-0005,
- Original Message -
Hi Tim,
...
While the fax machine starts to send the fax after a while it gives
the message, 'Fax failed' with error code: '388'. Is it the end
point fax machine issue or else? Please assist me out to resolve
this issue at earliest.
Please do not email me
Hi all,
Couple of things I would like ask, does Asterisk provides free license for
FoIP (for 1 channel) or need to purchase it? Couple of years back, I was
able to send and receive the fax using Digium T1 card, in term of FoIP how
can I able to receive fax from traditional telephone lines / T1
- Original Message -
Hi all,
Couple of things I would like ask, does Asterisk provides free
license for FoIP (for 1 channel) or need to purchase it? Couple of
years back, I was able to send and receive the fax using Digium T1
card, in term of FoIP how can I able to receive fax from
- Original Message -
Hi Tim,
Unfortunately i can't reproduce the scenario because it was a long
time ago. But it would be nice to hear from you, what things can be
verified within fax and Asterisk? Any TIP on wireshark monitoring?
Within Asterisk, the debug logs can be helpful for
- Original Message -
Hi Tim,
Thanks for your response. Here is my topology as listing down below;
PSTN Line -- Cisco Voice GW -- IP Cloud -- Asterisk
Will Asterisk able to receive the fax (as in topology above) using
its' fax module? In sip.conf I enabled fax detection and T.38.
Hi Tim,
Unfortunately i can't reproduce the scenario because it was a long time
ago. But it would be nice to hear from you, what things can be verified
within fax and Asterisk? Any TIP on wireshark monitoring?
El 31/05/2012 03:08, Tim Nelson tnel...@rockbochs.com escribió:
- Original
On 05/30/2012 12:02 AM, Danny Dias wrote:
Hi all,
Does Hylafax and IAXmodem works with analog lines? or only with E1?
I've been checking some commercial solutions (in case Asterisk is not
on site, and the customer wants a Fax Server as standalone), i saw
FaxBack and Linkcom e-fax
But
I've used Asterisk 1.4.22 with hylafax and iaxmodem and it wasn't reliable
at all; sometimes the fax reach the destination, sometimes not, and even
worse, asterisk got froozen...(here using analog lines over Sangoma B600
and Digium TDM400P, same behavior with both.
Other history with same
Just to clarify, i were using fax machines connected to fxs ports
El 30/05/2012 20:31, Danny Dias ing.diasda...@gmail.com escribió:
I've used Asterisk 1.4.22 with hylafax and iaxmodem and it wasn't reliable
at all; sometimes the fax reach the destination, sometimes not, and even
worse,
I had Hylafax sending 1000s of faxes a day twice a week connected to analogue
lines using asterisk and iaxmodem for about 4 years. People don't use fax much
anymore though
No problems whatsoever
Cheers Duncan
On 31/05/2012, at 6:49 AM, Danny Dias wrote:
Just to clarify, i were using fax
- Original Message -
I've used Asterisk 1.4.22 with hylafax and iaxmodem and it wasn't
reliable at all; sometimes the fax reach the destination, sometimes
not, and even worse, asterisk got froozen...(here using analog lines
over Sangoma B600 and Digium TDM400P, same behavior with
Hello,
For those customers with only analog lines, who ask for fax2email and
email2fax, whats the most reliable solution available and tested with
Asterisk?
Thanks
--
_
-- Bandwidth and Colocation Provided by
On Tue, May 29, 2012 at 3:10 AM, Danny Dias ing.diasda...@gmail.com wrote:
Hello,
For those customers with only analog lines, who ask for fax2email and
email2fax, whats the most reliable solution available and tested with
Asterisk?
Thanks
I've been real happy with using HylaFax+ and
Any hint about email2fax?
Thank you
El 29/05/2012 17:03, Warren Selby escribió:
On Tue, May 29, 2012 at 3:10 AM, Danny Dias ing.diasda...@gmail.com
mailto:ing.diasda...@gmail.com wrote:
Hello,
For those customers with only analog lines, who ask for fax2email
and email2fax, whats
- Original Message -
On Tue, May 29, 2012 at 3:10 AM, Danny Dias ing.diasda...@gmail.com
wrote:
Hello,
For those customers with only analog lines, who ask for fax2email
and
email2fax, whats the most reliable solution available and tested
with Asterisk?
Thanks
I've
On Tue, May 29, 2012 at 8:03 AM, Warren Selby wcse...@selbytech.com wrote:
On Tue, May 29, 2012 at 3:10 AM, Danny Dias ing.diasda...@gmail.comwrote:
Hello,
For those customers with only analog lines, who ask for fax2email and
email2fax, whats the most reliable solution available and tested
Hi all,
Does Hylafax and IAXmodem works with analog lines? or only with E1?
I've been checking some commercial solutions (in case Asterisk is not on
site, and the customer wants a Fax Server as standalone), i saw FaxBack and
Linkcom e-fax
But again, if Hylafax and iaxmodem works also with
On 30/05/2012, at 10:02 AM, Danny Dias wrote:
Hi all,
Does Hylafax and IAXmodem works with analog lines? or only with E1?
Hylafax can use any fax modems: available E1 or analogue, ISDN as long as it
can talk to it to send the commands
If you add asterisk and iaxmodem then hylafax can
Hi Steve,
Thanks for the reply, I didn't change anything else, just changed spandsp
version to de FFA, I use the spandsp version with more success in other places,
but in this particular case, sending faxes works ok with both versions but with
spandsp I couldn't receive any fax, with FFA I may
On 05/18/2012 04:45 AM, Sebastian Gutierrez wrote:
with FFA I may get 70% of faxes ok.
Nobody that I work with would consider that acceptable.
Lee.
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Sebastian,
Seeing as this an issue related to faxing using the SpanDSP library;
if you do not get an answer leading to a solution here, then you may try
asking on the SpanDSP mailing list
http://lists.soft-switch.org/mailman/listinfo
It's likely that the Asterisk users, specifically using
Hi Sebastian,
has still some issues that not all faxes pass ok, but does the work ==
still badly broken
Your log doesn't seem to show a spandsp error. It looks more like a bad
signal. Did you change anything else when you installed FFA? Usually
people move the other way to improve their
Hi,
I´m with asterisk 1.6.2.20
DAHDI Version: 2.5.0.2 Echo Canceller: HWEC, MG2
SpanDSP: spandsp-0.0.6pre20.tgz
FXO lines.
Sending faxes works ok.
but receiving gives me error:
here is the debug:
http://pastebin.com/qfFeXWQW
any idea??
Thanks!
--
On 5/4/12 1:57 AM, Bruce B wrote:
James,
That is amazing details. I can use all of this. Thank you for sharing.
I am assuming you installed res_fax from repository?
*yum install asterisk18-res_fax_digium.i386*
No. I built Asterisk 10 from source. Once I installed spandsp, the
menuconfig
Hello,
I want to send out 1000 faxes. I have an excel sheet of numbers and I have
Asterisk 1.8 installed from repository. I don't want to use a fax machine
or any ATAs or analogue equipment. How would Asterisk help me with faxing
these? and what add-ons do I need to make this possible?
I can
On 05/03/2012 01:28 PM, Bruce B wrote:
I want to send out 1000 faxes. I have an excel sheet of numbers and I
have Asterisk 1.8 installed from repository. I don't want to use a fax
machine or any ATAs or analogue equipment. How would Asterisk help me
with faxing these? and what add-ons do I
Lee,
Much appreciated for the input.
I am running all VoIP. SIP and IAX2 to our ITSPs. Please elaborate on
HylaFax and IAXmodems. Is there a guide posted on to get it running, or is
it part of the repository? Once installed how would one send .pdf as fax?
Thanks,
Bruce
On Thu, May 3, 2012 at
On 5/3/12 9:16 PM, Bruce B wrote:
Lee,
Much appreciated for the input.
I am running all VoIP. SIP and IAX2 to our ITSPs. Please elaborate on
HylaFax and IAXmodems. Is there a guide posted on to get it running, or
is it part of the repository? Once installed how would one send .pdf as fax?
James,
That is amazing details. I can use all of this. Thank you for sharing.
I am assuming you installed res_fax from repository?
*yum install asterisk18-res_fax_digium.i386*
And how did you install SpanDSP? Is there a guide you used?
I am aiming for multi-channels fax so the digium one won't
1 - 100 of 1425 matches
Mail list logo