Of course, use the codec for the pentium 4!!
bilal ghayyad a écrit :
> Dear Marc;
>
> Thanks a lot for your kindly help.
>
> My output of the command cat /proc/cpuinfo is:
>
> [EMAIL PROTECTED] /]# cat /proc/cpuinfo
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 15
>
Dear All;
The codec problem resolved, I used the correct codec
should be codec_g729a_v32_pentium4m.tar.gz as the
output of the command cat /proc/cpuinfo giving:
Pentium(R) 4 CPU and my confusion was that I cared for
the output of the command core show version which
gives:
Asterisk SVN-branch-1.
Dear Marc;
Thanks a lot for your kindly help.
My output of the command cat /proc/cpuinfo is:
[EMAIL PROTECTED] /]# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Pentium(R) 4 CPU 3.40GHz
stepping: 1
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
To know your architecture, use the cmd: cat /proc/cpuinfo
After try to start to use the version below (i686):
http://downloads.digium.com/pub/telephony/codec_g729/asterisk-1.4/x86-32/codec_g729a_v32_i686.tar.gz
Good luck
bilal ghayyad a écrit :
> D
Dear Marc;
I readed your email about the codec G729a and I am now
also need to install the codec on my Asterisk.
I typed from Asterisk CLI:
core show version and I got the following:
Asterisk SVN-branch-1.4-r72556 built by root @
localhost.localdomain on a i686 running Linux on
2007-06-30 13:0
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Ok, I've downloaded the i386 module and it works, I have the module loaded...
Thanks for the command!!
Rafael Canchola a écrit :
>
> Hi:
>
> You can check the next command: show g729
> and you should see some like this "0/0 encoders/decoders of 2 li
Hi:
You can check the next command: show g729
and you should see some like this "0/0 encoders/decoders of 2
licensed channels are currently in use"
or
the command show translation
or check the asterisk log may be the module is not for you processor version.
Best Regards
At 09:06 a.m. 10/10/
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Good Morning,
Any help would be grateful to help me understanding what's wrong...
I have bought 2 g729a licenses to digium and I would like to have them works...
My processor is an Intel(R) Xeon(R) CPU E5310 @ 1.60GHz (4
processors)
so I h