Ok, so i made the terminal screen wider, but during the call nothing changes:
( # = Audio Level * = Max Audio Hit )
(RX)
(TX)
###*
Rx: 10736 (10736) Tx: 0 (0)
What could be the
Péter Tóth wrote:
Ok, so i made the terminal screen wider, but during the call nothing changes:
( # = Audio Level * = Max Audio Hit )
(RX)
(TX)
###*
Rx: 10736 (10736) Tx: 0 (0)
Péter Tóth wrote:
When i try ztmonitor as follows, it gives strange output...
[EMAIL PROTECTED] zaptel-1.2.10]# ./ztmonitor 1 -vv
Visual Audio Levels.
Use zapata.conf file to adjust the gains if needed.
( # = Audio Level * = Max Audio Hit )
Hi!
I have a very strange question. I'm using trixbox with Asterisk
1.2.23-BRIstuffed-0.3.0-PRE-1y-j.
I configured and installed the HFC ISDN card with a script, as here:
http://www.trixbox.org/forums/trixbox-forums/help/how-install-hfc-card-trixbox
Now i have 6 SIP hardphone, and softphone,
On Tue, Sep 18, 2007 at 10:20:14AM +0200, Péter Tóth wrote:
Hi!
I have a very strange question. I'm using trixbox with Asterisk
1.2.23-BRIstuffed-0.3.0-PRE-1y-j.
I configured and installed the HFC ISDN card with a script, as here:
What do you mean on direct call?
The error is more frequently on my sip trunk. Should I make a sip debug?
My pbx is behind nat, maybe it is a nat problem?! Or a SIP setup problem?
Anyway i will watch the bri debug, and try to make a wrong and a correct
call.
Thanks
2007/9/18, Tzafrir Cohen
On Tue, Sep 18, 2007 at 12:07:20PM +0200, Péter Tóth wrote:
What do you mean on direct call?
The error is more frequently on my sip trunk. Should I make a sip debug?
My pbx is behind nat, maybe it is a nat problem?! Or a SIP setup problem?
Anyway i will watch the bri debug, and try to make
Hi!
Yes, the echo test worked perfectly.
When i try ztmonitor as follows, it gives strange output...
[EMAIL PROTECTED] zaptel-1.2.10]# ./ztmonitor 1 -vv
Visual Audio Levels.
Use zapata.conf file to adjust the gains if needed.
( # = Audio Level * = Max Audio Hit )