On Mon, 9 Apr 2007, Peer Oliver Schmidt wrote:
Hello Armin (and happy easter),
thanks for you continuing support.
Can you please try HEAD version of SVN trunk (443)?
Did checkout the 443.
It works without any verbosity.
THANK YOU! I'll buy you a beer, if you ever happen to come to
On Tue, 3 Apr 2007, Armin Schindler wrote:
On Tue, 3 Apr 2007, Peer Oliver Schmidt wrote:
Hello Armin,
thanks a lot for your help.
Can you please do the same with 'showcapimsgs=2'?
It may give more info on the commands itself, maybe some parameters are
wrong here.
Here you
Hello Armin (and happy easter),
thanks for you continuing support.
Can you please try HEAD version of SVN trunk (443)?
Did checkout the 443.
It works without any verbosity.
THANK YOU! I'll buy you a beer, if you ever happen to come to the
northern part of Germany.
--
Best regards
Peer
On Mon, 2 Apr 2007, Peer Oliver Schmidt wrote:
Hello Armin,
[EMAIL PROTECTED]:~# grep capi /var/log/asterisk/messages
[Mar 31 16:17:03] ERROR[3850] chan_capi.c: Unable to listen on contr1
(error=0x100f)
Is this helpful, or do you need more information?
Yes, at this state it
Good Morning Armin,
tried the patch, but it did not work. It waits quite a long time
before the chan-capi error message comes up, according to the time
stamp it is about 12 seconds. It is kind of strange, that the whole
startup process for asterisk usually takes only about 4-5 seconds.
On Tue, 3 Apr 2007, Peer Oliver Schmidt wrote:
Good Morning Armin,
tried the patch, but it did not work. It waits quite a long time
before the chan-capi error message comes up, according to the time
stamp it is about 12 seconds. It is kind of strange, that the whole
startup process for
Hello Armin,
here are the results, after modprobe kernelcapi showcapimsgs=3
/var/log/kern.log
Apr 3 15:06:14 server42 kernel: [255113.053170] CAPI Subsystem Rev 1.1.2.8
Apr 3 15:06:18 server42 kernel: [255116.814334] fcpci: AVM FRITZ!Card
PCI driver, revision 0.7.2
Apr 3 15:06:18
On Tue, 3 Apr 2007, Peer Oliver Schmidt wrote:
Hello Armin,
here are the results, after modprobe kernelcapi showcapimsgs=3
/var/log/kern.log
...
Apr 3 15:06:22 server42 kernel: [255120.102281] capi20: Rev 1.1.2.7: started
up with major 68 (middleware+capifs)
Apr 3 15:06:35
Hello Armin,
thanks a lot for your help.
Can you please do the same with 'showcapimsgs=2'?
It may give more info on the commands itself, maybe some parameters are
wrong here.
Here you go. 17:23:17 is the magic time.
Apr 3 17:23:09 server42 kernel: [263323.308388] fcpci: AVM FRITZ!Card
On Tue, 3 Apr 2007, Peer Oliver Schmidt wrote:
Hello Armin,
thanks a lot for your help.
Can you please do the same with 'showcapimsgs=2'?
It may give more info on the commands itself, maybe some parameters are
wrong here.
Here you go. 17:23:17 is the magic time.
This log below
Good evening Armin,
This log below shows no error in parameters, but the problem is still the
same: the fcpci driver doesn't respond and I cannot tell why.
Ok. Thanks for your assistants anyhow. What strikes me as strange ist
the fact, that turning on verbose helps to circumvent the problem.
Hi,
I have installed the above two, and have two questions:
* Is there a reason (or better=a fix), why the chan-capi-1.0.0 does
not compile together with Asterisk 1.4.2?
* Anyone else experiencing problems with chan-capi-HEAD not seeing
the controller? If I run asterisk with verbose setting to
On Mon, 2 Apr 2007, Peer Oliver Schmidt wrote:
Hi,
I have installed the above two, and have two questions:
* Is there a reason (or better=a fix), why the chan-capi-1.0.0 does
not compile together with Asterisk 1.4.2?
Actually chan-capi-1.0.0 does compile with Asterisk 1.4.2. The problem
Hello Armin,
Actually chan-capi-1.0.0 does compile with Asterisk 1.4.2. [..]but you [..]
just
change the line
if grep -q ASTERISK_VERSION_NUM 0104 $INCLUDEDIR/version.h; then
to
if grep -q ASTERISK_VERSION_NUM .*104 $INCLUDEDIR/version.h; then
in create_config.sh
thanks, will try.
On Mon, 2 Apr 2007, Peer Oliver Schmidt wrote:
Hello Armin,
Actually chan-capi-1.0.0 does compile with Asterisk 1.4.2. [..]but you [..]
just
change the line
if grep -q ASTERISK_VERSION_NUM 0104 $INCLUDEDIR/version.h; then
to
if grep -q ASTERISK_VERSION_NUM .*104
Hello Armin,
[EMAIL PROTECTED]:~# grep capi /var/log/asterisk/messages
[Mar 31 16:17:03] ERROR[3850] chan_capi.c: Unable to listen on contr1
(error=0x100f)
Is this helpful, or do you need more information?
Yes, at this state it might be possible that less CPU power causes
problems. The
16 matches
Mail list logo
