I have not seen the output of modprob zaptel in this thread, which has
to take place before loading the other kernel drivers.
Lyle
so
mesh s wrote:
Hi,
I changed the mother board (MB) but it is giving still
the same problem.
modprobe zaptel is successful. When I do lsmod zaptel
is loaded.
Regards,
Somesh S. Shanbhag
--- Lyle Giese [EMAIL PROTECTED] wrote:
I have not seen the output of modprob zaptel in this
thread, which has
to take place before loading the other kernel
drivers.
Lyle
so
mesh s wrote:
Hi,
I changed the mother board (MB) but it is giving still
the same problem.
ouput of dmesg|tail
f6 != 58
f7 != 59
f8 != 58
f9 != 59
fa != 58
fb != 59
fc != 58
fd != 59
fe != 58
Freshmaker failed register test
and I have also configured zaptel.conf correctly.
Whatz next? Can I assume that it
Hi,
Output of scanpci -v
pci bus 0x0003 cardnum 0x00 function 0x00: vendor
0xe159 device 0x0001
Tiger Jet Network Inc. Intel 537
CardVendor 0xa159 card 0x0001 (Card unknown)
STATUS0x0210 COMMAND 0x0107
CLASS 0x02 0x80 0x00 REVISION 0x00
BIST 0x00 HEADER 0x00 LATENCY 0x20
somesh s wrote:
Hi,
I didn't get any solution in the mailing list.
[http://asterisk.linkx.net/asteriskusers/200409/msg01167]
What should be the next step?
Changing the machine???
Is it machine dependent?...
Regards,
Somesh S. Shanbhag
Have you talked with Digium support?
Their
Hi,
I did dmesg | tail it says ...
dmesg | tail
f6 != 58
f7 != 59
f8 != 58
f9 != 59
fa != 58
fb != 59
fc != 58
fd != 59
fe != 58
Freshmaker failed register test
This is small part of dmesg output which may help in
diagnosing the problem.
Registered Tormenta2 PCI
No ISA tormenta card found at
Hi,
I didn't get any solution in the mailing list.
[http://asterisk.linkx.net/asteriskusers/200409/msg01167]
What should be the next step?
Changing the machine???
Is it machine dependent?...
Regards,
Somesh S. Shanbhag
--- Tzafrir Cohen [EMAIL PROTECTED] wrote:
On Tue, Sep 27, 2005 at
[EMAIL PROTECTED] wrote on 09/27/2005
03:13:21 AM:
Hi,
I did dmesg | tail it says ...
dmesg | tail
f6 != 58
f7 != 59
f8 != 58
f9 != 59
fa != 58
fb != 59
fc != 58
fd != 59
fe != 58
Freshmaker failed register test
The only time I've seen this it has been on a PCI
2.1 computer.
Hi,
Thanks for the explanation.
I have Intel Pentium 4 on my motherboard. So it will
be
PCI 2.2 according to the explanation.
(/proc/cpuinfo)
It *should not* be a problem of PCI or not?.
Regards,
Somesh S. Shanbhag
--- [EMAIL PROTECTED] wrote:
[EMAIL PROTECTED] wrote on
09/27/2005
I know it seems basic but did you make sure and plug power into the
board when you installed it into the PCI slot? I spent about three hours
trying to get the dang thing to work in my machine until I decided to
stick the card into another PCI slot. That is when I noticed that I had
On Mon, Sep 26, 2005 at 10:00:10PM -0400, Patrick wrote:
I know it seems basic but did you make sure and plug power into the
board when you installed it into the PCI slot? I spent about three hours
trying to get the dang thing to work in my machine until I decided to
stick the card into
Hi,
The card is detected as the following below...
lspci -vb
01:01.0 Network controller: Tiger Jet Network Inc.
Intel 537
Subsystem: Unknown device a159:0001
Flags: bus master, medium devsel, latency 32,
IRQ 10
I/O ports at b800
Memory at ff8ff000 (32-bit,
-Messaggio originale-
Da: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] conto di somesh s
Inviato: venerdì 23 settembre 2005 11.49
A: Asterisk Users
Cc: [EMAIL PROTECTED]
Oggetto: [Asterisk-Users] Problem setting up TDM22B card
Hi All,
I have the problem setting up TDM22B card.
Steps
Try using modprobe wctdm
Regards,
Fabrizio Mazzoni
-Messaggio originale-
Da: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] conto di somesh s
Inviato: venerdì 23 settembre 2005 11.49
A: Asterisk Users
Cc: [EMAIL PROTECTED]
Oggetto: [Asterisk-Users] Problem setting up TDM22B card
Hi All,
I tried modprobe wctdm also same result...
Regards,
Somesh S. Shanbhag
--- Fabrizio Mazzoni [EMAIL PROTECTED] wrote:
Try using modprobe wctdm
Regards,
Fabrizio Mazzoni
-Messaggio originale-
Da: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
conto di somesh s
Inviato: venerdì
Remember that you need to edit BOTH zaptel.conf AND zapata.conf to
conform to your configuration
Doesn't wctdm take care of both the FXO and FXS modules on the TDM400 card
On my RH9 system I run:
modprobe zaptel
modprobe wctdm
ztcfg -vv
Does your MB see the TDM card?
Digium's answer if it
16 matches
Mail list logo