If you have a PRI to a telco, they probably only have a single trunk
group with 23 channels in it for your connection.
Any calls to any of your numbers may come to you on any channel.
Channels are not dedicated to individual numbers.
In other words the first call may come in on channel 1,
If I understand this correctly, you want to be able to accept
simultaneous calls to the single DID (555) 222 0001. There is no reason
to roll over to another DID if there is already a call on that DID.
You can receive as many calls to a single DID for as many channels you
have on your T1.
My goal is when a call comes to the main number which is (555) 222 0001,
to have it roll over to the next available T1 channel.
Or give busy signal to the caller if all channels are busy. To have one
main number for all calls.
I believe the dialstring:
exten = _XXX,1,Dial(Zap/G0/5551212)
Looks like you need someone else to do the setup for you.
Anyhow, if you have 23 channels, then it rolls over to the next
channel without any configuration. The only thing that could prevent
your dialplan from handling this nicely is if you have a different
context for each channel in
Andrei (MPI) wrote:
Hello everyone,
I'm sure someone had an experience arranging hunt-group setup for
incoming calls on T1 PRI channels of Digium TE110P card.
For instance, I have main DID channel associated with number (555) 222
0001.
And I have whole bunch of other DID channels on same T1
Thanks to all.
If PRI channels are not dedicated to DID number - that's all I need. I
hope it will work as you describe and there will be new call on new
channel each time they dial same number. That's VERY cool.
Sorry, I am a newbie to T1 world, though have been using Asterisk with
TDM400P
If PRI channels are not dedicated to DID number - that's all I need. I
hope it will work as you describe and there will be new call on new
channel each time they dial same number. That's VERY cool.
Sorry, I am a newbie to T1 world, though have been using Asterisk with
TDM400P PSTN lines /
