This is a problem I pointed out to Digium a while back, but I am not sure Markster
understood the issue and I didn't really have the time to follow it up. It does need
fixing though, as it is a major drawback in the current architecture.
Rgds
Tim
-Original Message-
From: [EMAIL
Send traces.
- Original Message -
From: Aimable [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, June 17, 2004 6:28 AM
Subject: [Asterisk-Users] Problems with PRI with T410 messages
Hi all,
I have a box running asterisk with T410 connected to a Nortel DMS 100
switch
and
This is a problem I pointed out to Digium a while back, but I am not sure
Markster understood the issue and I didn't really have the time to follow it
up. It does need fixing though, as it is a major drawback in the current
architecture.
Rgds
Tim
Hi all,
I have a box running asterisk with
ACKNOWLEDGE (15)
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of CW_ASN
Sent: 17 June 2004 12:13
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] Problems with PRI with T410 messages
This is a problem I pointed out to Digium a while back, but I am
I do not believe you are correct. We see CALL PROCEEDING in both
directions as part of the normal ISDN call setup process. See trace
below.
Asterisk sends 'CALL PROCEEDING' followed immediately by 'ALERTING'. CALL
PROCEEDING is normally an acknowledgement to a SETUP. See Q931 below: