If i'm understanding this correctly, you shouldn't need 16 ports.
If you buy 2 TDM400P cards, and load them up with 8 FXS (4 on each card)
then buy 2 TDM400P cards, and load them up with 8 FXO (4 on each card)
This should reduce your PCI count down to a more manageable 4 cards
In total your
On April 25, 2005 07:39 am, [EMAIL PROTECTED] wrote:
I would like to setup a 8 FXS + 8 FXO interface using the X100P Cards. The
problem now comes in the PCI ports. Is there any PC that can handle 16
ports?
What is most optimal solution?
The most optimal solution would be a TE110P + a channel
Thanks very much for this info Andrew.
Selon Andrew Kohlsmith [EMAIL PROTECTED]:
On April 25, 2005 07:39 am, [EMAIL PROTECTED] wrote:
I would like to setup a 8 FXS + 8 FXO interface using the X100P Cards. The
problem now comes in the PCI ports. Is there any PC that can handle 16
ports?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Andrew
Kohlsmith
Sent: Monday, April 25, 2005 8:04 AM
snip
Channel banks are great; the better ones (Adit600) can do far-end
disconnect
supervision and I think pretty much all of them do dynamic impedance
On April 25, 2005 09:05 am, Karl H. Putz wrote:
What configuration do you need to do to the Adit in order to get it to
recognize
FXO side disconnect? I have tried a number of different settings and can
never
get it to pass through to *.
It just worked for me, nothing unusual or funny. You
