what we needed and I want to ask if I understand the naming correctly:
FXS = pstn-signals for calling someone (towards central pbx/server) and
knowing that someone is calling you
FXO = ...?
FXS has a phone plugged in it
FXO hgas a phone line plugged in it
Hi Michel,
Michel Brabants wrote:
I didn't see a bri-adapter on the digium-site, only pri it seems. Any
recommendation on that or is there a bri-adapter from digium. I'm also
open to other vendors. I saw that there are others which ar ecompatible
with asterisk, but I don't have a lot of time
[EMAIL PROTECTED] wrote on 03/25/2005 09:14:42 AM:
Hello
I want to to know if the motherboards VIA are fully supporte by
asterisk.
This is a complex question.
The *software* is fully supported. Depending on the CPU you use, you may
have to modify the makefiles (some VIA CPU's do not
[EMAIL PROTECTED] wrote on 03/25/2005 09:14:42 AM:
Hello
I want to to know if the motherboards VIA are fully supporte by
asterisk.
This is a complex question. The *software* runs on Mini-ITX (what I
assume you're asking about) just fine. The *hardware* *may* have issues
however.
These
Victor Sanchez wrote:
hello to all.
I have a PC with a E400P Card with 4 E1 with a RJ48 jack
is posible to convert any RJ48 jack to 30 phone line ?
yes, you need an equipment called a channel bank
is for example.
1 E1 come from the telco operator to PC
and with asterisk i a lot of things and
Victor Sanchez wrote:
hello to all.
I have a PC with a E400P Card with 4 E1 with a RJ48 jack
is posible to convert any RJ48 jack to 30 phone line ?
is for example.
1 E1 come from the telco operator to PC
and with asterisk i a lot of things and before send it to a phone but, where i plug
www.diguim.com
Wildcard T100P - Single t1
http://www.digium.com/downloads/product_sheets/T100P.pdf
Wildcard TE410P - 4 port - I believe support independant config of each T1
http://www.digium.com/downloads/product_sheets/TE410P.pdf
Wildcard T400P - 4 port -
Digium makes a 4 port card. It'd be hard to get 4 lines with quicknet
hardware.
Bartosz Jozwiak wrote:
Hello,
Again one more question about hardware.
What could you suggest me to buy.
I need hardware to connect let's say 4 analog lines. (FXO).
This hardware should talk to Asterisk of course..
Here are some options:
Digium X100P x 4
US$100 * 4 = US$400
well supported by asterisk
manufacturer supports asterisk developers
Deployed in lots of places with Asterisk
Voicetronix OpenLine4
-
US$500?
Use 1 PCI card
reported working with chan_vpb
Seeing your PBX go down in flames due to bad hardware support...
PRICELESS!
On Thu, 21 Aug 2003, Anthony Wood wrote:
Here are some options:
Digium X100P x 4
US$100 * 4 = US$400
well supported by asterisk
manufacturer supports asterisk developers
Deployed in lots of
10 matches
Mail list logo
