.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf
Of John Novack
Sent: Friday, July 01, 2005 10:42 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] passing through MWI info from SBC
Mike Myers
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of Jon Radon
Sent: Saturday, July 02, 2005 10:49 AM
To: andrew matthews; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: Re: [Asterisk-Users] passing through MWI info
Mike Myers wrote:
Hi.. I am about to replace my aging Nortel Venture
system with an Asterisk system and 6 Polycom IP 501
phones, and a couple sipura 841's for less used areas.
We have 3 phone lines here. One is SBC, one Vonage,
and one Voipjet... One hangup is that I can't figure
out how to
of the DC status of a POTS line
removed due to problems.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of John Novack
Sent: Friday, July 01, 2005 10:42 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] passing through MWI
Is there alternative access to voicemail? Like web access?
If there was then you can write a program to check the site every 5 or
10 minutes maybe every 30, and parse out the message listing and then
send MWI to the phones if there is a VM waiting.
Or
You could get one of those cheep 20 dollar
Chris Gamble wrote:
Does this just sound worse than it is?
With SBC you are out of luck, since Asterisk doesn't detect dialtone (it dials
blind, sometimes too quickly for the CO to catch the first digit, resulting in wrong
numbers )) or stutter dialtone either, and reportedly has had
This is unrelated, but you may want to try the SPA-3000's rather than
the SPA841's, my experience on the 841's has been problematic with
quality issues.
Regards,
Greg
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mike Myers
Sent: Thursday, June 30,
