On Tue, Mar 27, 2007 at 11:20:49AM +0200, Mauro Zanin wrote:
Hi everybody,
does anybody knows how to install and configure VZAPHFC?
Basically something of the sort of:
Copy the sources of vzaphfc as a subdirectory vzaphfc under the sources
of zaptel .
Add to Makefile.linux26 the line:
On Wed, Jan 03, 2007 at 07:16:06AM +0100, Remco Barendse wrote:
On Wed, 3 Jan 2007, Tzafrir Cohen wrote:
P[ 0] -- mISDN Channel Driver Registred -- (BE AWARE THIS DRIVER IS
EXPERIMENTAL!)
..Jan 2 23:07:23 ERROR[25747]: chan_zap.c:10603 setup_zap: Unknown
signalling method
On Fri, 29 Dec 2006, Julian J. M. wrote:
It's not necessary to recompile the kernel for mISDN support. Check
http://www.laimbock.com/asterisk/
Grab the mISDN source rpm, and build it.
$ wget
http://www.xs4all.nl/~pjl/downloads/asterisk/srpms/mISDN-cvs20061107-2_fc6.lc.src.rpm
$ rpmbuild
Remove from zapata.conf the lines re bristuff (bri_cpe_ptmp, etc).
Setup misdn:
/etc/init.d/misdn-init config
vi /etc/misdn-init.conf(check it's ok, NT or TE, PTP or PTMP...)
/etc/init.d/misdn-init start
chkconfig --add misdn-init
Setup chan_misdn, in /etc/asterisk/misdn.conf. At the end:
On Tue, Jan 02, 2007 at 11:10:56PM +0100, Remco Barendse wrote:
On Fri, 29 Dec 2006, Julian J. M. wrote:
It's not necessary to recompile the kernel for mISDN support. Check
http://www.laimbock.com/asterisk/
Grab the mISDN source rpm, and build it.
$ wget
On Wed, 3 Jan 2007, Tzafrir Cohen wrote:
P[ 0] -- mISDN Channel Driver Registred -- (BE AWARE THIS DRIVER IS
EXPERIMENTAL!)
..Jan 2 23:07:23 ERROR[25747]: chan_zap.c:10603 setup_zap: Unknown
signalling method 'bri_cpe_ptmp'
our Asterisk is not bristuffed. And you don't expect to use
On Thu, 28 Dec 2006, Gavin Hamill wrote:
On Thursday 28 December 2006 23:27, Tzafrir Cohen wrote:
vzaphfc is not a complete replacement of bristuff. It replies on most of
it. Rather, it replaces the zaphfc subdirectory with an improved ZapBRI
driver for HFC-s-based PCI cards.
Further,
It's not necessary to recompile the kernel for mISDN support. Check
http://www.laimbock.com/asterisk/
Grab the mISDN source rpm, and build it.
$ wget
http://www.xs4all.nl/~pjl/downloads/asterisk/srpms/mISDN-cvs20061107-2_fc6.lc.src.rpm
$ rpmbuild --rebuild mISDN-cvs20061107-2_fc6.lc.src.rpm
On Fri, 29 Dec 2006, Julian J. M. wrote:
It's not necessary to recompile the kernel for mISDN support. Check
http://www.laimbock.com/asterisk/
Grab the mISDN source rpm, and build it.
$ wget
http://www.xs4all.nl/~pjl/downloads/asterisk/srpms/mISDN-cvs20061107-2_fc6.lc.src.rpm
$ rpmbuild
On 21:04, Thu 28 Dec 06, Remco Barendse wrote:
Hi list!
I'm totally fed up with bristuff (or it's instability with a simple HFC-S
card), 2 out of 3 times when people try to call they get the information
tone that the number is not connected.
I would like to try vzaphfc and I am looking
On Thu, Dec 28, 2006 at 09:04:40PM +0100, Remco Barendse wrote:
Hi list!
I'm totally fed up with bristuff (or it's instability with a simple HFC-S
card), 2 out of 3 times when people try to call they get the information
tone that the number is not connected.
I would like to try vzaphfc
On Thursday 28 December 2006 23:27, Tzafrir Cohen wrote:
vzaphfc is not a complete replacement of bristuff. It replies on most of
it. Rather, it replaces the zaphfc subdirectory with an improved ZapBRI
driver for HFC-s-based PCI cards.
Further, if you're looking for 'something else' re:
On Thu, 28 Dec 2006, Gavin Hamill wrote:
On Thursday 28 December 2006 23:27, Tzafrir Cohen wrote:
vzaphfc is not a complete replacement of bristuff. It replies on most of
it. Rather, it replaces the zaphfc subdirectory with an improved ZapBRI
driver for HFC-s-based PCI cards.
Further, if
On Thu, 28 Dec 2006, Michiel van Baak wrote:
When you found out stuff, specially how to make stuff with a
simple HFC-S card stable please let me know.
We are not deploying them cards anymore because we never get
it stable.
Real simple setups can be done with a FRITZ!PCI card, but I
really
14 matches
Mail list logo
