Hi List,
Two boxes
A has a PRI
B terminates SIP devices
A <--IAX--> B
Both on the same switch, same IP network.
Call from PSTN to A gets pushed via IAX to B -> Sip device
with no problems.
Call from Sip device -> B via IAX -> A -> PSTN
will drop exactly 5 seconds after the call is a
Il 14:49, mercoledì 24 marzo 2004, Diego Ercolani ha scritto:
[]
As wrote, it seems that MGCP-CAPI together of lasts cvs releases are bad.
Infact I've tryied the CVS version of 2004-03-12 and now I can phone via Cisco
ATA-186 MGCP and CAPI-0.3.1 without the noising problems that I've found
> Two boxes
>
> A has a PRI
>
> B terminates SIP devices
>
>
> A <--IAX--> B
>
> Both on the same switch, same IP network.
>
> Call from PSTN to A gets pushed via IAX to B -> Sip device
> with no problems.
>
> Call from Sip device -> B via IAX -> A -> PSTN
> will drop exactly 5 secon
Are you saying that the clicking only occurs when 128-bit WEP is
enabled? If this is the only
thing causing it (not network congestion), my guess would be that the
same processor doing
the encryption is also trying to drive the voice codec. We have this
same problem on our handheld
devices whe
> "Eric" == Eric Wieling <[EMAIL PROTECTED]> writes:
Eric> I'm trying to figure out what output format I should
Eric> tell GhostScript to use.
Eric> These are the formats GhostScript can output:
Eric> faxg3 faxg32d faxg4 tiff12nc tiff24nc tiffcrle
Eric> tiffg3 tiffg32d tiffg4 tifflzw tiffpac
Greetings
I'm now really messed up::: setup trying to by pass
NAT
*1 (bound to LAN addr) <-> Linux Gateway + *2
(bound to public addr) <-> Internet <-> IP Phone
A
*1 and *2 are registered and see each other fine
*1 has ext 13 SayUnixTime
*1 has ext 4403 an IP Phone on the LAN
On Mar 24, 2004, at 7:26 PM, Adam Hart wrote:
Robert Hajime Lanning wrote:
I also like to see two
people behind the same nat being able to communicate directly
(without
requiring pin-wheeling). Ie The client attaches their private ip to
the
register packet, which is used when client A & B's p
Steven Sokol wrote:
*snip*
Thoughts?
Even if IAX2 doesn't current have these features coded into asterisk et
al how does that stop an internet draft being written about them, all it
has to cover is how it should be implemented not how it actually is at
present, and having implemented the proto
On Thu, 25 Mar 2004, Dan Austin wrote:
> I was following the development of chan_sccp on the Lambda website,
> but sometime last week all of the links went dead, bugs, cvs, etc.
It looks like Jan may have gotten his virtual server config a bit wrong...
www.lambda-solutions.de gives the web site
- Original Message -
From: "Clif Jones" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, March 25, 2004 8:06 PM
Subject: Re: [Asterisk-Users] Semi OT: WiSIP and WEP
> Are you saying that the clicking only occurs when 128-bit WEP is
> enabled?
Verified. The WiSip phone has al
Hi,
I've been testing the soft fax but I am getting this segmentation fault
whenever I receive a fax. Can somebody help me please?
I've loaded asterisk from CVS and running Redhat 9.0 and downloaded the
latest spandsp. I am sending a fax from Windows XP fax software thru a
ringmaster then to X100
I have a bunch of existing AT&T/Lucent/Avaya 2500YMGP sets with LED
message waiting lights. Do I stand any chance of getting the Adtrans to
light these?
What I know so far:
When you pick up the telephone, the LED flashes.
If you plug two telephones in, picking up one flashes the LED on the
other
simprix wrote:
What kind of specs do I need for a asterisk box that will have a pri for
pstn and about 65 sip phones
I was thinking a Xeon 3.05
What length is a piece of string when you cut it?
I was thinking 2.374 m
Sorry about the sarcastic answer but if you look through the mailing
list
Make sure that Onhook Messaging is enabled on the Adtran FXS ports. I'd
also suggest upgrading to the latest 750 firmware (L36) as it fixes some
specific MWI issues.
-wade
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Steve Creel
Sent: Friday, March 26
I have L36, and Onhook Messaging is enabled. Does anyone have a reference
for MWI (other than that stuff that turns up on google)?
Sorry for not including the firmware version
Steve
On Fri, 26 Mar 2004, Wade J. Weppler wrote:
>Make sure that Onhook Messaging is enabled on the Adtran FXS p
101 - 115 of 115 matches
Mail list logo