On Mon, Apr 07, 2008 at 09:22:30PM -0500, Ruben Zamora wrote:
Lex
Thanks a lot. These morning i call Digium Support. One issue that i
miss in my before e-mail is that i have
my Asterisk installed in Monterrey,Mexico and my TELCO provider gave my
MFC/R2.
Asterisk 1.4.18,Zaptel
Hi JR !
You could use dbget/dbput to have something like that
i.e
Set(foo=${DB(counter/counter_val)})
Set(foo=${MATH(${foo}+1)}) ;
Set(DB(counter/counter_val)=${foo})
Stelios S. Koroneos
Digital OPSiS - Embedded Intelligence
http://www.digital-opsis.com
-Original Message-
From:
Ruben,
I am also in Monterrey and have used digium hardware on R2 and PRI.
MFC/R2 is not supported by digium but the zaptel driver requirement is
the same.. what changes is using libpri vs unicall.
Just go ahead and ask them for the firmware update or as Tzafir says
use a newer zaptel that
If you are busy doing something else and you hear this soft, pleasant
and unobtrusive sound, you suddenly realize Oh sh..., a Polycom
just rebooted! :)
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing
Steve Totaro wrote:
On Mon, Apr 7, 2008 at 6:36 AM, Tzafrir Cohen [EMAIL PROTECTED] wrote:
On Mon, Apr 07, 2008 at 10:37:42AM +0100, James Williamson wrote:
Tzafrir Cohen wrote:
On Mon, Apr 07, 2008 at 06:11:02AM +0100, James Williamson wrote:
Snap,
Well, after trying to
On Tue, Apr 08, 2008 at 09:42:48AM +0100, James Williamson wrote:
I've installed the 1.2.x zaptel drivers, this still doesn't work. Is
there anyone
in the UK who's successfully got a TDM410P to support caller id or am I just
wasting my time?
Before going further in wasting time, what do you
Hi James,
I've installed the 1.2.x zaptel drivers, this still doesn't work. Is
there anyone
in the UK who's successfully got a TDM410P to support caller id or
am I just
wasting my time?
I can (after many hours of testing) confirm that Zaptel 1.4.5.1 with
the following patch to wctd.c
That would at least be long enough to cover the entire boot process. ;)
Lee, John (Sydney) wrote:
It's played at the completion of the boot process. It's always been
very quiet on the models I've worked with.
Thanks Erik. I can probably replace it with my beloved Mozart Symphony
no 40
On Tue, 8 Apr 2008, James Williamson wrote:
I've installed the 1.2.x zaptel drivers, this still doesn't work. Is
there anyone
in the UK who's successfully got a TDM410P to support caller id or am I just
wasting my time?
I have it working on TDM400Ps under 1.2.x
Applying the patch mentioned
2008/4/8, Jean-Denis Girard [EMAIL PROTECTED]:
I agree with Tzafir, I'm not aware of zaptel support for HFC-USB; I
checked bristuff, it doesn't support it.
That's what I thought but it's better to ask as I don't feel so easy to read
source code at the moment.
Would be interesting to see
Hi Tzafrir,
As I can see from that report, a modified version of that patch was
applied to 1.4:
http://bugs.digium.com/9264#80824
It was reverted right before the release of 1.4.8, as it required more
testing, and re-applied immediately after it. Hence 1.4.9[.2]
includes it.
I did
If I see this, then messages are getting through.
--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?
John Covici
[EMAIL PROTECTED]
___
-- Bandwidth and Colocation Provided by
On Tue, Apr 08, 2008 at 10:44:39AM +0100, Matt Brown wrote:
Hi James,
I've installed the 1.2.x zaptel drivers, this still doesn't work. Is
there anyone
in the UK who's successfully got a TDM410P to support caller id or
am I just
wasting my time?
I can (after many hours of
Hi Tzafrir,
As I can see from that report, a modified version of that patch was
applied to 1.4:
http://bugs.digium.com/9264#80824
It was reverted right before the release of 1.4.8, as it required more
testing, and re-applied immediately after it. Hence 1.4.9[.2]
includes it.
I should
Hi Tzafrir,
Distinctive ring is broken :( it reports 0,0,0 for both ring types.
Is it reported anywhere?
http://bugs.digium.com/view.php?id=6296
Would appear to be the best match, however due to lack of feedback,
this bug was suspended.
Matt
Tzafrir Cohen wrote:
On Tue, Apr 08, 2008 at 09:42:48AM +0100, James Williamson wrote:
I've installed the 1.2.x zaptel drivers, this still doesn't work. Is
there anyone
in the UK who's successfully got a TDM410P to support caller id or am I just
wasting my time?
Before going further in
As I can see from that report, a modified version of that patch was
applied to 1.4:
http://bugs.digium.com/9264#80824
It was reverted right before the release of 1.4.8, as it required
more
testing, and re-applied immediately after it. Hence 1.4.9[.2]
includes it.
I should have read
On 03/04/2008, Steve Davies [EMAIL PROTECTED] wrote:
Anyone interested in this feature? I have a version 0.1 patch, which
is currently against 1.2.25-bristuffed, but which should port
trivially to almost any version. I am away until Tuesday 8th April,
but if there is enough interest, I will
I find it hard to believe no one knows, so is it just plain no helping? J
If someone would like to atleast point me in the right direction that will
deal specifically with what I'm asking, that would be appreciated too.
Much thanks.
From: Mark Hamilton [mailto:[EMAIL PROTECTED]
Sent:
I believe that what you described should just work with the caveat
that dtmf=inband is rarely the right thing to do over SIP, and is
prone to all sorts of DTMF detection and debounce issues.
I assume you've tried calling a POTS endpoint and listening to see if
you get DTMF passed through?
1) You
Not that I;m complaining But I just got my 2 HPEC license keys from
digium... for TDM800P and TDM400P
asterisk asterisk # zaphpec_enable
Digium High-Performance Echo Canceller Enabler
Copyright (C) 2006, Digium, Inc.
Version 1.0.2
Use the '-l' option to see license information for software
On Tue, Apr 08, 2008 at 12:25:09AM -0500, Erik Anderson wrote:
On Tue, Apr 8, 2008 at 12:06 AM, Lee, John (Sydney)
[EMAIL PROTECTED] wrote:
When I downloaded the sip and bootrom from Polycom website, I noticed a
file called SoundPointIPWelcome.wav. However, I have no idea where and
when
Lex
Thanks, I all ready download the last svn branches from zaptel And i
am going to test these afternoon.
My phone number es 81-83481611.
Thanks
Ruben
Lex Lethol escribió:
Ruben,
I am also in Monterrey and have used digium hardware on R2 and PRI.
MFC/R2 is not supported by digium
And would chew up the entire internal memory so no...not appropriate.
Regards,
Dean Collins
Cognation Pty Ltd
[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] +1-212-203-4357 Ph
+61-2-9016-5642 (Sydney in-dial).
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
That's what he's doing, he's asking someone with better sight to help
him out and tell him what buttons to press! :) I've dialed in the dark
enough times to know you don't need braille on the buttons to find the
3x4 array and use it properly without eyes.
Sorry, Steve, but I had a twinge of
Mojo thanks for the perspective check, hope this is of help:
Reset the 7940 and 7960 IP Phones to the Factory Default
In order to perform a factory reset of a phone if the password is set,
complete these steps:
* Unplug the power cable from the phone, and then plug in the cable again.
* The
The Asterisk.org development team has announced the release of Zaptel
versions 1.2.25 and 1.4.10. These releases contain many bug fixes as
well as performance enhancements.
A couple of the more major changes include: modifications to the
wctdm24xxp and wcte12xp drivers to increase interrupt
Hello,
When I receive a call to my CounterPath Bria from Asterisk 1.4.18.1 and I
place the call on hold, the call is dropped after 30 seconds.
It looks like there is no RTCP/RTP sent to the client from Asterisk while on
hold (music on hold playing to caller) thus client disconnects the call.
On 04/08/08 07:23, John covici wrote:
If I see this, then messages are getting through.
You are lucky :-/
I sent two messages to the list and they never arrived.
--
#Joseph
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
To be fair to the engineers at grandstream - an update to the latest
1.1.6.16 firmware seems to make the phones very very stable. I now have
a couple GXP2000s running at high call volume for the past 3 days
without any issue (usually it would happen within an hour).
Problem is that Polycom/Aastra
Hi ,
How does the Asterisk provide Voicemail Message waiting indication to
an h323 endpoint configured with Asterisk.
Please provide the required Setup / comfiguration details or redirect
to appropriate to resource.
Awaiting an earliest positive response.
Thanks in advance,
Anisha
Hi ,
How does the Asterisk provide Voicemail Message waiting indication to
an h323 endpoint configured with Asterisk.
Please provide the required Setup / comfiguration details or redirect
to appropriate to resource.
Awaiting an earliest positive response.
Thanks in advance,
Anisha
hi
im starting off with asterisk and i need to know how to do call forarding...
in out old telephony system we used to press *21*number# and all the calls
would be forwarded to that number and we used #21# to undivert is that possible
in asterisk and how do i do it
i have attached my
33 matches
Mail list logo