> On Thursday 30 April 2009 09:37:50 Oguzhan Kayhan wrote:
>> Ok I found an example script that said to be work..
>> but i have some errors.
>> Here is the script and then the error msgs.
>> exten => *666*,2,GotoIf($[${DB(CFBOOLEAN/${CALLERID(NUM)})} = 1]?3:102)
>
> The DB returns nothing, so it ev
Steve Howes wrote:
> On 28 Apr 2009, at 16:49, Daniel - Asterisk wrote:
>
>
>> Dear all,
>>
>> I wanna know what can I do to get the PBX's clock from
>>
>
>
> You sir, are made of fail.
>
>
I had to admit, I laughed.
PaulH
___
-- Bandwidth an
I am still not sure what you are askingis it something to do with NTP?
PaulH
Daniel - Asterisk wrote:
> I guess it was a problem with my connection, here the complete question..
>
> Dear all,
>
> I wanna know what can I do to get the PBX's clock from an external AMI
> server, especially wi
Hi,
After following the messages to install flite, I can find the following files.
/usr/lib/asterisk/modules/app_flite.so
/etc/asterisk/flite.conf
That's mean flite is installed successfully. Then I restart asterisk
but nothing found for that module.
sip*CLI> core show application flite
Your a
The phone is Cisco 7961. My system is a bit different. The Cisco 7961
connected to Callmanager with SCCP, Callmanager connect to Asterisk with
E1. Will I call into Meetme bridge, I would hear system noise even I am in
meetme IVR. The call between Cisco phones are worked well. I aslo tried
Avaya pho
Most likely you screwed up and just compiled dahdi release but you
still have loaded the rc dahdi kernel modules.
cat /sys/module/dahdi/version
That will tell you for sure which dahdi module version is loaded.
--
Moises Silva
Software Developer
Sangoma Technologies Inc. | 50 McIntosh Drive, Sui
Hi Jonas,
Maybe you can try leaving out bindport and bindaddr parameters first.
The port defaults to 4569 anyway. As for the bindaddr, you should be
using the IP Address of your interfaces. I am assuming you are using the
IP Address obtained from your router. If that is the case, then asterisk
--[ UxBoD ]-- wrote:
> - "Gordon Henderson" wrote:
>
>> On Fri, 1 May 2009, --[ UxBoD ]-- wrote:
>>
>>
>>> Okay, getting somewhere now ! I am now getting the following :-
>>>
>>> == Starting post polarity CID detection on channel 1
>>> -- Starting simple switch on 'DAHDI/1-1'
>>>
Are you sure you have the dev package installed.
I use Ubuntu/Debian and i needed to have "unixodbc-dev" as well as "unixodbc"
Make sure you get the development librarys otherwise it will not work/see it :)
-Kev
- Original Message -
From: Tim Panton
[mailto:t...@westhawk.co.uk]
To: Aste
> [14177.069426] dahdi: Version: 2.2.0-rc2
Are you sure you're using the latest stable release of Dahdi and not the rc?
- Noah
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or upd
What is the phone ?
If spa9X2 then you upgraded firmware ? 6.1.5 ? coz im getting this too
lately on non asterisk software.. but it disappears on first ring..
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Sunny Du
Sent: May
st_register_application: Already have an application 'VoiceMail'
you should really stop copy pasting anything you see..
this means that you have 2 load modules for voicemail
these are all warnings and notices, not errors...
what is the error ? already running asterisk process ?
killall -9 aster
" Hope your machine is not accessible via the Internet as 1.2.4 is likely to
have quite a few security vulnerabilities in it."
And they are ? the core itself ? LOL..
Im sure 1.6 has more than 1.2 or 1.4, but then again.. i was just reading a
thread here
" I have connected my Asterisk-box dire
On 1/05/2009 10:10 p.m., Sam Hawkin wrote:
> Hi,
>
> Thanks for your reply.
>
> I have tried to play the message 3 times, it played upto 30 seconds.
>
> We have installed amd based on the information given in below link
> http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+AMD
>
> We
Check this... http://prodsurvey.webng.com/top.jpg
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Hii,
Looking at this, your problem appears to be that you are diskbound. Note
the 60% "wait" time.
Use "hdparm -t" to find out the throughput of each of your disks. If its
not 20MB/sec or more then you need to look into the drivers you are using
for your disk. If you do have good disk throughpu
Okay. I've downloaded the lastest release of DAHDI and now I get this error:
# Sangoma Wanpipe #
#Dahdi/Zaptel/SMG/TDMAPI/BOOT Configuration Script #
#
Asterisk ODBC prereq libtool-ltdl libtool-ltdl-devel
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-user
On Sun, 3 May 2009, --[ UxBoD ]-- wrote:
> - "jonas kellens" wrote:
>> I have connected my Asterisk-box directly to my internetconnection. I
>> have disabled my firewall.
>>
>> Still I am unable to register with my IAX-provider. Can someone please
>> point me out why I am unable to registe
Then don't load the modules..
On 3 May 2009, at 16:03, Charlie Grosvenor wrote:
> I am just trying to start asterisk from the console by typing:
>
> asterisk -c
>
> What part of the config do you require me to post? I am not wanting
> to store any of the config in a database and have the connec
I am just trying to start asterisk from the console by typing:
asterisk -c
What part of the config do you require me to post? I am not wanting to store
any of the config in a database and have the connections commented out.
Thanks
-Original Message-
From: asterisk-users-boun...@lists.d
On Sun, May 3, 2009 at 6:08 AM, Doug Lytle wrote:
> Atlanticnynex wrote:
>> 3.4.1 was the first I tried. Gives me the same error.
>>
>>
>>
>
> Then I'd suggest that you file a bug report with Sangoma.
>
> Doug
This is probably a compilation error due to changes in DAHDI headers,
since DAHDI 2.2 i
On Sun, 3 May 2009, Sunny Du wrote:
> Hi team,
>
> I noted there has a little system noise while I dial into system. I do
> believe it is generated in system as I would heard those noise even I was in
> CDR. would anbody guide me where is the noise system generated?
>
> It is second time I meet th
On Sun, May 03, 2009 at 01:30:49PM +0100, Charlie Grosvenor wrote:
> When I try and start asterisk I get the following, however I have commented
> out the data the connections in res_mysql.conf and res_pgsql.conf. I am not
> sure therefore why I am getting these errors. Do I have to change someth
Hi team,
I noted there has a little system noise while I dial into system. I do
believe it is generated in system as I would heard those noise even I was in
CDR. would anbody guide me where is the noise system generated?
It is second time I meet this issue, last time was fixed by change from alaw
When I try and start asterisk I get the following, however I have commented out
the data the connections in res_mysql.conf and res_pgsql.conf. I am not sure
therefore why I am getting these errors. Do I have to change something else to
turn this off?
Thanks
Asterisk 1.4.21.2~dfsg-3, Copyright
Atlanticnynex wrote:
> 3.4.1 was the first I tried. Gives me the same error.
>
>
>
Then I'd suggest that you file a bug report with Sangoma.
Doug
--
Ben Franklin quote:
"Those who would give up Essential Liberty to purchase a little Temporary
Safety, deserve neither Liberty nor Safety."
- "jonas kellens" wrote:
> I have connected my Asterisk-box directly to my internetconnection. I have
> disabled my firewall.
>
> Still I am unable to register with my IAX-provider. Can someone please point
> me out why I am unable to register my Asterisk to another Asterisk-box ?
> A Re
- "Gordon Henderson" wrote:
> On Fri, 1 May 2009, --[ UxBoD ]-- wrote:
>
> > Okay, getting somewhere now ! I am now getting the following :-
> >
> > == Starting post polarity CID detection on channel 1
> > -- Starting simple switch on 'DAHDI/1-1'
> > [May 1 12:03:10] NOTICE[4360]: chan_
On Sat, 2 May 2009, Jim Dickenson wrote:
http://www.ex-parrot.com/~pdw/iftop/
You can use http://www.rpmfind.net/ to find where stuff you are looking for
can be found.
Or
apt-get install iftop
on sensible distributions ;-)
Gordon
--
Jim Dickenson
mailto:dicken...@cfmc.com
CfMC
http:/
30 matches
Mail list logo
