Hi
I was wondering if any one has used these cards, I am looking at this as
a replacement for the tdm410, I have some issues with installing the
tdm410 in a small case because of the power plug being at the end of the
board.
I am in australia seems like we have a different setup for out fxs
On Sat, Jun 27, 2009 at 11:06 AM, Olivieroza-4...@myamail.com wrote:
Hi,
Has anyone tried it ?
Is there any available pricelist ?
It is possible no one wants to answer this due to the NDA they had to sign?
___
-- Bandwidth and Colocation Provided
On Tue, Jun 23, 2009 at 5:40 PM, Ron nha...@gmail.com wrote:
I have a portal where a user can upload their own MP3, but when a user
is using a g729 codec, the music on hold has a crackly sound. using g711
it's very clear.
That could be for any number of reasons, including a overly
Yes, although not for connecting to the PSTN - I've used one for
connecting to a legacy NEC PABX.
Voltage isn't the issue - the difference is in the impedance. Australia
uses complex impedance (220+820Ohm resistors with a 120nF capacitor)
whereas the US uses a straight resistor.
Alex Samad
On Sun, 28 Jun 2009, randulo wrote:
On Sat, Jun 27, 2009 at 11:06 AM, Olivieroza-4...@myamail.com wrote:
Hi,
Has anyone tried it ?
Is there any available pricelist ?
It is possible no one wants to answer this due to the NDA they had to sign?
Though they have written me back twice to say
Hello everyone!
I am currently in the middle of writing an article on converting from
AgentCallbackLogin() dialplan application (which is deprecated as of 1.4, and
removed in the 1.6.x series of Asterisk) to using the AddQueueMember(), and
other dialplan based methods of performing the same
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi all!
Now that I have a little more time, I was debugging my dialplan and it
was of the following way:
- -
; DGB - 20090615
[macro-dial]
exten = s,1,Dial(${ARG1},15)
exten =
Jeff LaCoursiere wrote:
On Sun, 28 Jun 2009, randulo wrote:
On Sat, Jun 27, 2009 at 11:06 AM, Olivieroza-4...@myamail.com wrote:
Hi,
Has anyone tried it ?
Is there any available pricelist ?
It is possible no one wants to answer this due to the NDA they had to sign?
Though they have
Kevin P. Fleming wrote:
- Chris Mason (Lists) li...@masonc.com wrote:
licenses on them, usually $100 each time, and when I install the real
hardware for the client, I can't transfer the licenses. If I scrap
that
Our support department is very accomodating when it comes to handling
Starting playing with asterisk 1.6.1.0 i found the following problems:
In the cdr_pgsql, the sql statement is wrong:
2009-06-25 12:17:01 COT LOG: statement: INSERT INTO cdr
On 27 Jun 2009, at 11:27, Maris wrote:
guarantee delivery?, not to mention that IAX2 does not use RTP. Are
you
suggesting to change the protocol to support such transfers?
When it makes sense, yes - see below, otherwise the idea can get into
the waste paper backet.
...
But why does he
On Sun, 28 Jun 2009, Thomas Kenyon wrote:
Jeff LaCoursiere wrote:
On Sun, 28 Jun 2009, randulo wrote:
On Sat, Jun 27, 2009 at 11:06 AM, Olivieroza-4...@myamail.com wrote:
Hi,
Has anyone tried it ?
Is there any available pricelist ?
It is possible no one wants to answer this due to the
Managed to implement this on asterisk v1.4.24.1,
Also, Hangupcause updating to user field.
However, this only works on the edge of my voice network (demarcation
point)
It does not work on my internal routing boxes as I use IAX to route
between remote sites.
I was thinking of using some sort
On Sun, Jun 28, 2009 at 10:10:48PM +1000, Rob Hillis wrote:
Yes, although not for connecting to the PSTN - I've used one for
connecting to a legacy NEC PABX.
Thats good
Voltage isn't the issue - the difference is in the impedance. Australia
I get this in my dmesg when I load up the rdm410
Though they have written me back twice to say coming soon I am still
waiting for the software...
So you'd rather have it even when it hasn't been finished?
Umm, no, but then when a company says looking for beta testers - please
sign up now! and then four months later has nothing to let me
15 matches
Mail list logo
