Re: [asterisk-users] DAHDI Dynamic span as INT device identificator
On Thu, Aug 04, 2016 at 12:54:45PM -0300, Rafael dos Santos Saraiva wrote: > Hi > > Is it possible assign an INT identification to dynamic device in DAHDI? > Example: > > This is device: DYN/eth/eth1/04:74:A1:00:0A:AE/0 > I want call this as span 1 > > I saw the assigned-spans.conf and aparently can be this. > > Thanks in advance. See what I wrote earlier on the asterisk-dev list: http://lists.digium.com/pipermail/asterisk-dev/2016-April/075486.html Generally I don't like the way dsystem.conf is used both for defining synamic spans and for configuring existing spans. I explained there how to separte the two. This also makes it simpler to interact with span assignment. -- Tzafrir Cohen icq#16849755 jabber:tzafrir.co...@xorcom.com +972-50-7952406 mailto:tzafrir.co...@xorcom.com http://www.xorcom.com -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Asterisk 13 High CPU usage
All, I upgraded to asterisk 13.10. I have minimal load on the box. 20-30 calls a day. Right now, there are no calls on the box at all. top shows me this: PR 20 NI 0 VIRT 1570540 RES 84620 SHR 26296 S S %CPU 99.7 %MEM 8.4 TIME+ 3468:39 COMMAND asterisk When I run this command while true; do top -Hbc -p `pgrep asterisk` -n 1 && asterisk -rx "core show threads"; sleep 1; done I get this PID USER PR NIVIRTRESSHR S %CPU %MEM TIME+ COMMAND 29079 root 20 0 1570540 84620 26296 R 37.5 8.4 1178:31 asterisk 29010 root 20 0 1570540 84620 26296 R 31.2 8.4 1197:07 asterisk 29047 root 20 0 1570540 84620 26296 R 31.2 8.4 1186:48 asterisk Any ideas?? Previous message Hi all, I was using 13.5 but upgraded today to 13.9 (13.10 came out a few hours after I upgraded). On both 13.5 and 13.9 asterisk seems to use 100% of the CPU. This usually happens a few hours after starting asterisk. A restart of asterisk gets the CPU back down, but only for a little while. There asterisk box has no call traffic flowing through it, just 15 or so registrations. I'm sure this is not best practise but for now I am using chan_sip and pjsip at the same time. My pjsip endpoints are using TLS. I am not sure where to start looking in order to debug the CPU usage by asterisk and would very much appreciate some guidance. Kind regards, Chirag -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Metaswitch caller ID passing
This did get resolved on the carrier side - thank to all who pointed me towards documentation and suggestions. The Metaswitch has an option "Caller Number Connected Line ID Screening" which was set to "owned". Changing this to "valid format" allowed my asterisk instances to send foreign caller ID information and it was accepted. Cheers, j On 08/05/2016 09:05 AM, Jeff LaCoursiere wrote: Hi, I am dealing with a telco that has recently upgraded from a DMS100 switch to a "Metaswitch", and our PRI no longer passes foreign caller ID information, i.e. if I place an outbound call with specific caller ID information not associated with the PRI, it gets replaced with the PRI's primary phone number. This is a bit of a problem for follow-me services, which end up showing the PRI's primary phone number instead of the original caller's phone number. I know this isn't a "metaswitch" forum, but can anyone point me in a direction of some metaswitch documentation or know what the option is in a metaswitch to allow foreign caller ID information? The telco engineers are still struggling with this new switch, and I am not sure they understand or appreciate my urgency in getting this resolved! Cheers, -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users