,
but once
you run ztcfg -vvv, the system will lock up within a few seconds, no
errors reported in logs or console.
I'm stumped, Rhino is stumped, and I haven't seen any other threads of this
nature.
--
Barry D. Hassler
___
--Bandwidth and Colocation
on, leaving hald off, and the system is
running fine.
Did the same with the original problem system, and now have no problems with
the Rhino cards either!
On 1/23/07, Barry D. Hassler [EMAIL PROTECTED] wrote:
Hi Folks,
Struggling with a new * installation with 2 Rhino R2T1 cards. For some
reason
) on the analog
phones. Any ideas on where to check configurations, etc? I haven't
encountered this issue before (my other installations are always much larger
than this one for home).
--
Barry D. Hassler
___
--Bandwidth and Colocation provided by Easynews.com
:
On Mon, Feb 26, 2007 at 04:31:07PM -0500, Barry D. Hassler wrote:
Recent installation with a simple TDM11B (one FXO, one FXS) that
I've set up (at home). I am receiving callerID fine from the telco,
as it shows up in my call detail records, AND on 2 SIP phones.
However, I'm not reliably
How do you transfer or re-park a call that's been picked up from a parking
lot? I don't see any options for specifying the transfer options on the
parked call, so that you could transfer or repark it.
--
Barry D. Hassler
President, HCST
http://www.hcst.net/
937-427-9000
(or whatever
is specified in features.conf) to re-park or transfer the parked call.
I think this has been fixed in the latest versions of Asterisk 1.2
Marc.
*From:* [EMAIL PROTECTED] [mailto:
[EMAIL PROTECTED] *On Behalf Of *Barry D. Hassler
*Sent:* Monday, 12 March 2007 3:13 PM
*To:* Asterisk
screening (1)
Ext: 1 Reason: Forwarded unconditionally
(15) '2105' ]
-- Called g1/1937000
-- Local/[EMAIL PROTECTED],1 is ringing
mail*CLI
--
Barry D. Hassler
President, HCST
http://www.hcst.net/
937-427-9000
/asterisk-users
--
Barry D. Hassler
President, HCST
http://www.hcst.net/
937-427-9000
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman
://lists.digium.com/mailman/listinfo/asterisk-users
--
Barry D. Hassler
President, HCST
http://www.hcst.net/
937-427-9000
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit
-CallerIDName: Barry D. Hassler
Content-class: urn:content-classes:message
Subject: [PBX] New message 1 in mailbox 2302
Date: Tue, 20 Jan 2009 10:14:00 -0500
Message-ID: asterisk-1-745348593-2302-8...@asterisk-bvr
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator:
Thread-Topic: [PBX] New message 1 in mailbox
not be restarted
specifically.
I'm planning on restarting all the phones over the weekend, but as this is a
24-hour operation, we'd like to avoid interrupting phones at all.
--
Barry D. Hassler
President, HCST
http://www.hcst.net/
937-427-9000
. What
version of firmware and SIP?
From: Barry D. Hassler barry.hass...@gmail.com
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Friday, February 20, 2009 8:41:33 AM
Subject: [asterisk-users
.
Apparently this comes from some telco database somewhere? Numbers were
ported from a wired-telco.
--
Barry D. Hassler
President, HCST
http://www.hcst.net/
937-427-9000
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk
ClearReach.
- Original Message -
From: Barry D. Hassler
To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Tuesday, July 07, 2009 12:40 PM
Subject: [asterisk-users] Caller ID (name) - where does it come from?
Hi Folks, having an issue with outbound calls through a VOIP
://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Barry D. Hassler
President, HCST
http://www.hcst.net/
937-427-9000
___
-- Bandwidth
with an app (AGI?) that recorded valid names into the database and
let you insert the names where they aren’t.
--
*From:* asterisk-users-boun...@lists.digium.com [mailto:
asterisk-users-boun...@lists.digium.com] *On Behalf Of *Barry D. Hassler
*Sent:* Tuesday, July 07
Barry D. Hassler
President
HCST
2332 Grange Hall Road
Beavercreek, Ohio 45431-2345
http://www.hcst.net/
[EMAIL PROTECTED]
+1 937-427-9000
+1 937-427-8706 FAX
FWD: 3934279000 (655480)
HCST*Net Support Issues: please email [EMAIL PROTECTED]
Billing Issues: Please email [EMAIL
(i.e., several phones), use the Page command (show application page for options from the CLI). On paging, I would recommend this: Turn off speaker on remote disconnect: be set to Yes as well.
This works fine for me on firmware 1.1.1.9.
On 9/8/06, Barry D. Hassler [EMAIL PROTECTED
) sitting on channel 1. I also notice that if I unload chan_zap.so, it will say it is unregistering channel 1, which leads me to believe that SOMETHING is causing it to occupy that zap channel.
Are there any clues here as to why this is?
Barry D. Hassler
President
HCST
2332 Grange Hall
this quite a bit, but not turning up anything particularly relevant.
I am using asterisk 1.2.9.1
Barry D. Hassler
President
HCST
2332 Grange Hall Road
Beavercreek, Ohio 45431-2345
http://www.hcst.net/
[EMAIL PROTECTED]
+1 937-427-9000
+1 937-427-8706 FAX
FWD: 3934279000 (655480
:[EMAIL PROTECTED]]
Sent: Wed 9/27/2006 6:51 PM
To: Barry D. Hassler; Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Spurious hangups on zaptel interface
Barry D. Hassler wrote:
We seem to be getting unexpected hangups on our * system, very
consistent when
Title: RE: [asterisk-users] Spurious hangups on zaptel interface
Commenting out the busydetect=yes seems to have resolved this annoying issue! Thanks Eric!
On Thu, 2006-09-28 at 02:26 -0400, Barry D. Hassler wrote:
I did have busydetect=yes in my config, but not the callprogress.I've
Hey folks, Is it possible to play a pre-recorded file in a meetme
conference? That is, I'd like to get everyone into a conference, then
somehow play a previously recorded file (in this case, a podcast). This
isn't for individuals to call into to listen to the cast, but for it to
be played
/wiki/index.php?page=Asterisk+auto-dial+out).
You can pass a Data argument with the filename, to an extension that
simply plays a file into the conference.
You may also be able to do something with the 'b' argument to MeetMe.
--Brian
On Mon, Oct 09, 2006 at 04:42:02PM -0400, Barry D. Hassler wrote
on the Channel:
Channel: Local/[EMAIL PROTECTED]
It works!
On Thu, 2006-10-12 at 19:18 +0100, Tim Panton wrote:
On 10 Oct 2006, at 22:33, Barry D. Hassler wrote:
I was playing around with that idea myself, but I can't find a way
to place the call which will actually play the recording
Hi, can someone enlighten me as to the difference between a PRI and a
Digital Trunk (other than cost)?
I do understand PRI (B-channel signaling, incoming/outgoing call setup,
D channel for voice/data, etc), but I'm not quite sure how that compares
with what my vendor is calling a Digital Trunk
the differences with them further, as the pricing is about double for the PRI vs the Digital Trunk. I'd like to move 7 analog lines to a digital interface, but just can't cost-justify it in this scenario :-(
On Tue, 2006-07-25 at 15:25 -0400, Barry D. Hassler wrote:
Hi, can someone enlighten me
Any further experience with the 3102? I'm looking for a solution to connect 2 CO lines and a set of 2-line phones to my asterisk server (along with a bunch of SIP phones). Would 2 of these work well for that?
Hopefully no echo problems! That would kill this project? I'm still searching for
On Sat, 2006-08-19 at 00:12 -0500, Rich Adamson wrote:
Barry D. Hassler wrote:
Any further experience with the 3102? I'm looking for a solution to
connect 2 CO lines and a set of 2-line phones to my asterisk server
(along with a bunch of SIP phones). Would 2 of these work well
that the call was indeed parked
though, and after calling the person back, he reported he was just hearing
the lovely on-hold music.
Is there a known issue (and even better, a fix) for this situation? Any
other information I can provide I'll do so!
--
Barry D. Hassler
President, HCST
http
or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Barry D. Hassler
President, HCST
http://www.hcst.net/
937-427-9000
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
having this problem when I upgraded to the 1.4 version from
1.2.
On 10/31/07, Mojo with Horan Company, LLC [EMAIL PROTECTED]
wrote:
Barry D. Hassler wrote:
I've tried to find other threads with this same topic, but haven't
found any... Apologies if this already being discussed
Running
Does anyone know how much space the appliance has for voicemail and/or logs?
Doesn't have an embedded disk from what I can see, and only a 1G flash card?
--
Barry D. Hassler
President, HCST
http://www.hcst.net/
937-427-9000
___
--Bandwidth
curious if others have encountered this same situation (I'm sure you
have), or any other pertinent thoughts.
Thanks in advance!
--
Barry D. Hassler
President, HCST
http://www.hcst.com/
937-427-9000
--
_
-- Bandwidth and Colocation
34 matches
Mail list logo