Re: [asterisk-users] forwarding pots lines
Sorry to jump in on this but I am also interested in this topic. In my scenario I have about 10 POTs lines brought into the front of a facility and the only infrastructure connecting the back of the facility is a 3000ft fiber backhaul. I've been asked to bring the POTs lines to the back of the facility. Are there any ATAs that trunk multiple POTs Lines? Like a multiplexer of some sort. If anyone has any information can you please provide the manufacturer and model of the device? Thank You, Dennis -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of randulo Sent: Friday, May 23, 2008 4:44 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] forwarding pots lines On Fri, May 23, 2008 at 10:04 AM, Eric Fort [EMAIL PROTECTED] wrote: will an ata directly connect to another remote ata thus emulating a long phone cord? also most of the ATA's I've seen drive a phone rather than accepting a line from the telco. Depending on the reliability needed (is this a way to talk to a girlfriend in another country or a mission-critical business use?) I'd say it's better to pay a small monthly fee to someone like OnSIP.com and use their centrex. If it's because you have the phone lines already installed and need to just use them at certain times, I do think there are FXO devices but I'm not sure they will help. You wouldn't need two asterisk servers at any rate but only one. The phones connect (through a router if need be) to the asterisk at the phone lines + FXO end. /r ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] forwarding pots lines
Will fax and dial-up internet work through the gateway? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe Carroll Sent: Friday, May 23, 2008 8:51 AM To: Asterisk Users Mailing List - Non-Commercial Discussion; Asterisk Users Mailing List -Non-Commercial Discussion Subject: Re: [asterisk-users] forwarding pots lines There are a couple of companies out there that make 24 port fxo and fxs boxes. If you have some unused fibers you cout do this very reliably with two channel banks... One with fxs ports and the other with fxo ports and t1 media converters. The grand stream solution mentioned in an earlier post does 8 ports, you could get one 4 port model and one 8 port model of fxs and the same of fxo and accomplish your goal rather inexpensively as well. Joe -Original Message- From: Dennis P. Clark [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: 5/23/08 8:43 AM Subject: Re: [asterisk-users] forwarding pots lines Sorry to jump in on this but I am also interested in this topic. In my scenario I have about 10 POTs lines brought into the front of a facility and the only infrastructure connecting the back of the facility is a 3000ft fiber backhaul. I've been asked to bring the POTs lines to the back of the facility. Are there any ATAs that trunk multiple POTs Lines? Like a multiplexer of some sort. If anyone has any information can you please provide the manufacturer and model of the device? Thank You, Dennis -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of randulo Sent: Friday, May 23, 2008 4:44 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] forwarding pots lines On Fri, May 23, 2008 at 10:04 AM, Eric Fort [EMAIL PROTECTED] wrote: will an ata directly connect to another remote ata thus emulating a long phone cord? also most of the ATA's I've seen drive a phone rather than accepting a line from the telco. Depending on the reliability needed (is this a way to talk to a girlfriend in another country or a mission-critical business use?) I'd say it's better to pay a small monthly fee to someone like OnSIP.com and use their centrex. If it's because you have the phone lines already installed and need to just use them at certain times, I do think there are FXO devices but I'm not sure they will help. You wouldn't need two asterisk servers at any rate but only one. The phones connect (through a router if need be) to the asterisk at the phone lines + FXO end. /r ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Cannot hear the other side of the phone call
I have had Asterisk 1.2.10 up and running for the past two months. I have not done anything to the system in the last month. I am using broadvoice.com as a sip provider. Yesterday everything was working fine and now when I call out or receive calls I cannot hear the person on the other line, however they can hear me just fine. When I call internally to another extension both parties can hear eachother. This only seems to be happening when I dial out. Additionally I setup a soft phone (X-Lite) and connected directly to the broadvoice.com sip server and I was able to communicate perfectly. Any Ideas? Thanks, Dennis ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] LOUD MP3 Hold Music
How do you lower the volume of MP3 hold music? Dennis Clark DENPRO WRK 207.618.1998 CEL 443.415.0527 FAX 1.888.811.8809 [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] LOUD MP3 Hold Music
If MP3s are too loud then their should be an internal function that modifies all MP3s in the folder to be at one consistent volume (normalization). Anybody know of a way to do this? Here is my musiconhold.conf just in case I missed something. [classes] Random = quietmp3:/var/lib/asterisk/mohmp3 Dennis Clark DENPRO WRK 207.618.1998 CEL 443.415.0527 FAX 1.888.811.8809 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rich Adamson Sent: Tuesday, August 22, 2006 2:19 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] LOUD MP3 Hold Music David Freeman wrote: I have the opposite problem. I can hardly hear the hold music at all. On 8/22/06, *Dennis P. Clark* [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: How do you lower the volume of MP3 hold music? I'm certainly not an expert on MOH, but I don't believe there are any volume control knobs to be tweaked in asterisk itself. You might want to take a look at the configs/musiconhold.conf.sample file as there were some parameters that impacted high/med/quiet modes, but I'm thinking they only applied to the old mpg123 music app. Could easily be wrong. Best guess... probably have to use something like sox to change the volume of the mp3 (or whatever) file itself. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] Zaptel install - Fedora Core 5
I couldn't find 2.6.17-1 for download but this is what I used to install the kernel source http://download.fedora.redhat.com/pub/fedora/linux/core/5/source/SRPMS/GFS-kernel-2.6.15.1-5.FC5.17.src.rpm Dennis Clark DENPRO WRK 207.618.1998 CEL 443.415.0527 FAX 1.888.811.8809 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of simon elliston ball Sent: Monday, August 21, 2006 7:02 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Zaptel install - Fedora Core 5 I managed to get zaptel to compile reasonably easily on 2.6.17-1.2157_FC5smp. However, the yum repo sites do not provide devel packages for 2.6.17-2174 for some reason last time I checked, hence couldn't get it to build on that kernel. You could probably create the devel package without too much trouble from the srpm, but it's a lot easier to stick to 2157. If anyone else have managed to get FC5 to install the correct devel packages for the latest kernel, please let me know! Simon On 21 Aug 2006, at 11:52, Tomislav Parčina wrote: I'm trying to install Zaptel 1.2.7 on Fedora Core 5 with 2.6.17-1.2174_FC5 kernel from source code. When I untar Zaptel and execute this is error that I get. cc -o ztmonitor ztmonitor.o cc -o ztspeed.o -c ztspeed.c cc -o ztspeed ztspeed.o cc -I. -Iinclude -O4 -g -Wall -DBUILDING_TONEZONE- DSTANDALONE_ZAPATA -DZAPTE L_CONFIG=\/etc/zaptel.conf\zttest.c -o zttest cc -I. -Iinclude -O4 -g -Wall -DBUILDING_TONEZONE- DSTANDALONE_ZAPATA -DZAPTE L_CONFIG=\/etc/zaptel.conf\ -c -o fxotune.o fxotune.c cc -o fxotune fxotune.o -lm /lib/modules/2.6.17-1.2174_FC5/build You do not appear to have the sources for the 2.6.17-1.2174_FC5 kernel installed . make: *** [linux26] Error 1 What could be the problem? How to solve it? -- Tomislav Parčina Lama Computers Split Stinice 12, 21000 Split Tel.: +385(21)495148 Mob.: +385(91)1212148 SIP: [EMAIL PROTECTED] e-mail: tparcina#lama.hr http://www.lama.hr ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] Page()
I receive the following error in the Asterisk console when I try to
execute the Page() application:
WARNING[24360]: pbx.c:1700 pbx_extention_helper: No application 'Page'
for extention (intercom, *, 1)
EXTENSIONS.CONF
[Default]
Exten = *80,1,Goto(intercom,s,1)
[intercom]
exten = s,1,Answer
exten = s,n,SIPAddHeader(Call-Info: answer-after=0)
exten = s,n,Playback(beep)
exten = s,n,Set(TIMEOUT(digit)=5)
exten = s,n,WaitExten(10)
;Page
exten = *,1,Page(SIP/2000x1)
;Intercom
exten = _,1,Dial(SIP/${EXTEN})
Any clues?
Dennis Clark
DENPRO
WRK 207.618.1998
CEL 443.415.0527
FAX 1.888.811.8809
[EMAIL PROTECTED]
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] Page()
What is the module I should be loading and how do I load it?
Dennis Clark
DENPRO
WRK 207.618.1998
CEL 443.415.0527
FAX 1.888.811.8809
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Leonardo
Kamache (Gmail)
Sent: Wednesday, August 16, 2006 10:17 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Page()
Hi there;
Did you load the respective module?
Regards;
LK
On 8/16/06, Dennis P. Clark [EMAIL PROTECTED] wrote:
I receive the following error in the Asterisk console when I try to
execute the Page() application:
WARNING[24360]: pbx.c:1700 pbx_extention_helper: No application 'Page'
for extention (intercom, *, 1)
EXTENSIONS.CONF
[Default]
Exten = *80,1,Goto(intercom,s,1)
[intercom]
exten = s,1,Answer
exten = s,n,SIPAddHeader(Call-Info: answer-after=0) exten =
s,n,Playback(beep) exten = s,n,Set(TIMEOUT(digit)=5) exten =
s,n,WaitExten(10)
;Page
exten = *,1,Page(SIP/2000x1)
;Intercom
exten = _,1,Dial(SIP/${EXTEN})
Any clues?
Dennis Clark
DENPRO
WRK 207.618.1998
CEL 443.415.0527
FAX 1.888.811.8809
[EMAIL PROTECTED]
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] Page()
1.2.10 Dennis Clark DENPRO WRK 207.618.1998 CEL 443.415.0527 FAX 1.888.811.8809 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug Lytle Sent: Wednesday, August 16, 2006 11:10 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Page() Dennis P. Clark wrote: I receive the following error in the Asterisk console when I try to execute the Page() application: WARNING[24360]: pbx.c:1700 pbx_extention_helper: No application 'Page' for extention (intercom, *, 1) What version of Asterisk are you running? Doug -- Ben Franklin quote: Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] Page()
I am running Fedora 5 Cat /proc/sys/kernel/osrelease 2.6.15-1.2054_FC5 Zaptel 1.2.7 was not installed Edited xpp_usb.c and wcusb.c files in Zaptel to get it to compile and install by commenting out the following .owner = THIS_MODULE, I receive the following from CLI when I run load module app_page.so WARNING[28359]: loader.c:325 __load_resource: /usr/lib/asterisk/modules/app_page.so: cannot open shared object file: No such file or directory And yes app_page.so does not exist in /usr/lib/asterisk Dennis Clark DENPRO WRK 207.618.1998 CEL 443.415.0527 FAX 1.888.811.8809 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of C F Sent: Wednesday, August 16, 2006 12:04 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Page() in the CLI do: show applications like page if you something there then you have it loaded, otherwise do: load app_page.so if that fails my guess is you need zaptel loaded first. On 8/16/06, Dennis P. Clark [EMAIL PROTECTED] wrote: 1.2.10 Dennis Clark DENPRO WRK 207.618.1998 CEL 443.415.0527 FAX 1.888.811.8809 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug Lytle Sent: Wednesday, August 16, 2006 11:10 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Page() Dennis P. Clark wrote: I receive the following error in the Asterisk console when I try to execute the Page() application: WARNING[24360]: pbx.c:1700 pbx_extention_helper: No application 'Page' for extention (intercom, *, 1) What version of Asterisk are you running? Doug -- Ben Franklin quote: Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] Page()
That fixed it. Thanks! Here is what I did to fix Asterisk -crv (enter CLI) Stop gracefully (Shutdown Asterisk) Cd /usr/src/asterisk-1.2.10 (Go to unpacked Asterisk installation files) Make install (install asterisk) Asterisk (start asterisk) Dennis Clark DENPRO WRK 207.618.1998 CEL 443.415.0527 FAX 1.888.811.8809 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of C F Sent: Wednesday, August 16, 2006 5:21 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Page() I guess it might not get compiled if you don't have a timer. Install ztdummy, recompile asterisk and try again. On 8/16/06, Dennis P. Clark [EMAIL PROTECTED] wrote: I am running Fedora 5 Cat /proc/sys/kernel/osrelease 2.6.15-1.2054_FC5 Zaptel 1.2.7 was not installed Edited xpp_usb.c and wcusb.c files in Zaptel to get it to compile and install by commenting out the following .owner = THIS_MODULE, I receive the following from CLI when I run load module app_page.so WARNING[28359]: loader.c:325 __load_resource: /usr/lib/asterisk/modules/app_page.so: cannot open shared object file: No such file or directory And yes app_page.so does not exist in /usr/lib/asterisk Dennis Clark DENPRO WRK 207.618.1998 CEL 443.415.0527 FAX 1.888.811.8809 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of C F Sent: Wednesday, August 16, 2006 12:04 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Page() in the CLI do: show applications like page if you something there then you have it loaded, otherwise do: load app_page.so if that fails my guess is you need zaptel loaded first. On 8/16/06, Dennis P. Clark [EMAIL PROTECTED] wrote: 1.2.10 Dennis Clark DENPRO WRK 207.618.1998 CEL 443.415.0527 FAX 1.888.811.8809 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug Lytle Sent: Wednesday, August 16, 2006 11:10 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Page() Dennis P. Clark wrote: I receive the following error in the Asterisk console when I try to execute the Page() application: WARNING[24360]: pbx.c:1700 pbx_extention_helper: No application 'Page' for extention (intercom, *, 1) What version of Asterisk are you running? Doug -- Ben Franklin quote: Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
