[asterisk-users] Re: Zap channel faxing in or out fails but phone calls work.
It was a simple solution. Bruce Reeves was correct. Sangoma had and issue with their drivers and re-syncing. I upgraded the drivers and all is good. Thanks to those that offered help. It was much appreciated. Greg I had similar problems with a Sangoma card in this configuration. I recently received from Sangoma an updated driver that fixed issues with resyncing the clock on the card. You might try getting a hold of Sangoma, David Yat Sin if possible and ask him about it, it may very well be the same problew. On 7/19/06, Gregory L Miller-Kramer [EMAIL PROTECTED] wrote: I have AAH2.8 on a dual Xeon system with a Sangoma A104 and an Adtran Channel Bank. The system has a single PRI connected to port 1 and port 2 has the T1 cable connected to the Channel Bank. Both are configured properly and work for the inbound/outbound calls and soft-fax reception. I have fax machines connected to FXS ports on the channel bank. The idea here is to allow faxing out over the PRI from these FXS ports and for inbound DIDs to go to specific fax machines. I have [EMAIL PROTECTED] 2.8 setup on this system and I am pretty certain I have it configured correctly. * Each fax machine has it's own Zap extension. * The DID routes to the correct fax machine (zap extension). * I can make and receive phone calls with these fax machines. Meaning, the fax machine has a phone hand set. I can call out with that handset and receive calls on that handset. Here's the problem. When I try send or receive faxes it fails telling me there was a com error. Any ideas? I am at a loss. I have followed the logs. The transmit and receive work. Once the connection is made it fails indicating com error. Additionally, I hear the whistle and chirp of fax machines talking to each other. Combined with being able to make and receive calls over those fax machine hand sets I don't know what the problem is at this point. Please, if anyone has fax machines setup with a similar situation I would appreciate knowing how you have it setup. OS - CentOS 4.3 zaptel - 1.2.5 libpri - 1.2.3 asterisk - 1.2.9.1 freepbx - 2.0.1 Thank you, Greg -- This message has been scanned for viruses and dangerous content, and is believed to be clean. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Zap channel faxing in or out fails but phone calls work.
I have AAH2.8 on a dual Xeon system with a Sangoma A104 and an Adtran Channel Bank. The system has a single PRI connected to port 1 and port 2 has the T1 cable connected to the Channel Bank. Both are configured properly and work for the inbound/outbound calls and soft-fax reception. I have fax machines connected to FXS ports on the channel bank. The idea here is to allow faxing out over the PRI from these FXS ports and for inbound DIDs to go to specific fax machines. I have [EMAIL PROTECTED] 2.8 setup on this system and I am pretty certain I have it configured correctly. * Each fax machine has it's own Zap extension. * The DID routes to the correct fax machine (zap extension). * I can make and receive phone calls with these fax machines. Meaning, the fax machine has a phone hand set. I can call out with that handset and receive calls on that handset. Here's the problem. When I try send or receive faxes it fails telling me there was a com error. Any ideas? I am at a loss. I have followed the logs. The transmit and receive work. Once the connection is made it fails indicating "com error". Additionally, I hear the "whistle and chirp" of fax machines talking to each other. Combined with being able to make and receive calls over those fax machine hand sets I don't know what the problem is at this point. Please, if anyone has fax machines setup with a similar situation I would appreciate knowing how you have it setup. OS - CentOS 4.3 zaptel - 1.2.5 libpri - 1.2.3 asterisk - 1.2.9.1 freepbx - 2.0.1 Thank you, Greg -- This message has been scanned for viruses and dangerous content and is believed to be clean. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Re: Asterisk-Users Digest, Vol 23, Issue 114
[EMAIL PROTECTED] wrote: Send Asterisk-Users mailing list submissions to asterisk-users@lists.digium.com To subscribe or unsubscribe via the World Wide Web, visit http://lists.digium.com/mailman/listinfo/asterisk-users or, via email, send a message with subject or body 'help' to [EMAIL PROTECTED] You can reach the person managing the list at [EMAIL PROTECTED] When replying, please edit your Subject line so it is more specific than Re: Contents of Asterisk-Users digest... Today's Topics: 1. Re: Odd Asterisk Stress Test Results (Erick Perez) 2. Re: sip to h323 gateway ... (Gary Richardson) 3. Re: Comedian Mail not deleting .txt file (Matt) 4. Agents And Queues (Tristan) 5. Re: SIP codec preference order ineffective (Martin Joseph) 6. Re: Best $300 VoIP phone for asterisk? (Martin Joseph) 7. Asterisk Cisco 3800 (Wasif) 8. Re: Need to Hire: PHP Programmer for PhoneCALL (olivier.taylor) 9. Re: Anyone see this? (Matt) 10. Re: SIP codec preference order ineffective (olivier.taylor) 11. Re: Comedian Mail not deleting .txt file (Doug Lytle) 12. Re: WRTG54GS Capacity (Daniel Salama) 13. Re: DUNDi Not Able to Handle Complex FailoverSituations (Stephen Davies) 14. Re: sip to h323 gateway ... (Tigran Kocharyan) 15. RE: Best $300 VoIP phone for asterisk? (Colin Anderson) 16. RE: DUNDi Not Able to Handle ComplexFailoverSituations (Douglas Garstang) 17. RE: Anyone see this? (Colin Anderson) 18. RE: DUNDi Not Able to Handle ComplexFailoverSituations (Douglas Garstang) 19. RE: DUNDi Not Able to HandleComplexFailoverSituations (Douglas Garstang) 20. Strange one-way audio (Timothy R. McKee) 21. Re: Comedian Mail not deleting .txt file (Andrew Willerding) 22. Re: Best $300 VoIP phone for asterisk? (Andrew Kohlsmith) 23. Re: Odd Asterisk Stress Test Results (Michael Iedema) 24. RE: DUNDi Not Able to Handle ComplexFailoverSituations (Douglas Garstang) 25. Re: Comedian Mail not deleting .txt file (Steven Ringwald) -- Message: 3 I too have seen this happen on two occasions. Said there was a 93 second message (when I logged into the web interface).. comedian mail said there was a message, but there was nothing. 1.2.7 The issue is the version of Asterisk you are running 1.2.7 has this bug... The change log on asterisk's site indicates such. It is fixed in version 1.2.8 and higher. I had to upgrade in order to fix it. The path to upgrade isn't all that easy but it is not too tough either. ALWAYS BACKUP YOUR CONFIGS, and EVERYTHING YOU CARE ABOUT with respect to the phone system. I usually back up the /etc folder and a few others. In addition I do a mysqldump of the asterisk database (AAH). You need to download the latest version of libpri (if you have a PRI), and the latest version of asterisk. o rebuild install libpri ** IF, like me, you are using freePBX-AAH-whatever-its-called-now, then you need to copy the extra_apps/* into the asterisksrc/apps/ folder and patch the make file in there (apps folder) BEFORE rebuild install of asterisk... o rebuild install asterisk ( you do NOT need to make samples or make config You already have those.) o Also, rebuild install asterisk-addons (if you have and use them) That should do it. I have done it a few times at this point. Additionally, I have mine in a vserver so, I REALLY didn't want to have to do anything to zaptel... Would have meant more annoyance. Hope that helps. :) Later, ~G -- Senior Engineer Context Technologies, Inc. (585) 586-6775 x8195 [EMAIL PROTECTED] http://www.contexttech.com -- This message has been scanned for viruses and dangerous content, and is believed to be clean. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
