[asterisk-users] Picked up calls die in exactly 20 seconds
Weird thing happening when a call is picked up. Whether by *8 feature, or by directed pickup via dialplan, either with Pickup() or with Pickup2(), the same thing happens: the call is picked up successfully, and after exactly 20 seconds talking, the call is terminated. The originating end gets a hangup, while the side that did the pickup goes mute. Anyone experienced anything similar? ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Re: Milliwatt Analyzer available
Could I use this to distinguish human voices from machine beeps and/or ambient noise etc, by (after a few adaptations) calling it a number of times on the same set of samples with some representative set of frequencies? Or is there a better, less CPU-torturing way to do that? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Roger Schreiter Sent: Thursday, March 02, 2006 5:50 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Milliwatt Analyzer available Hi, some days ago we discused here the need for an analyzer for the 1000 Hz tone, as opposite application to Milliwatt. Here it is: Mwanalyze http://planinternet.net/download/voip/asterisk/app_mwanalyze.c It performs a Fourier analysis for a fixed frequency and tells the amplitude. The frequency is not limited to 1000 Hz, but can be passed as argument. The periode duration must be a mulitple of 0.5 ms, thus the valid frequences are: 2000 Hz, 1000 Hz, 666.7 Hz, 500 Hz, ... __ Mensagem enviada usando o Webmail da ViaLink ver. 2.7.8 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Re: How many TDM2400P's will a server take?
Juan Carlos Castro y Castro wrote: Ah -- for all intents and purposes, assume I can obtain the most kickass PC server hardware in the known Universe. So -- any real-life experiences out there? We successfully ran four fully-loaded TDM2400Ps in a server here during development testing. The configuration was half FXS and half FXO on each board. I would not recommend running that much load in a single server of FXS, because the power supply requirements are too great, but if at least half is FXO then you should be fine. Four TDM2400Ps is the same amount of Zaptel load as a single quad-port T1 card, so most servers should be able to handle it. Sweet! So -- what are the specs of that server you tested on? Specifically, the power supply wattage? My intended use here is all FXS, so I suppose a limit of 2 would be reasonable. By the way -- don't you think it would be nice if some FXS hardware had some way to drain power from somewhere else that the PC's power supply? Forgive me if this idea has already been discussed to death there. Thanks for the info, Juan __ Mensagem enviada usando o Webmail da ViaLink ver. 2.7.8 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Re: How many TDM2400P's will a server take?
Just figured I'd offer my experience with power restrictions and the 2400P... When I purchased a Dell 2800 series tower I found that there were no Molex power connectors in the box so I thought I was out of luck if I wanted to use *any* FXS card (TDM400 or TDM2400) in this box. I spoke with the guys at Digium about power requirements for the card and ended up buying an external power supply (Altech PS-4512: http://www.wolfautomation.com/Product.aspx?ProductID=17140amp;CategoryID=2725) , coaxial power connectors and some shrink wrap from Radio Shack. I can not remember exactly what the power requirements per Quad FXS module were but I am sure Digium can provide that. The guys at Digium also mentioned they were looking into an external solution like this for the same reason I was -- I just needed a solution that day :) I would assume you could use a solution like this to provide the required power to the X number of cards in a system. I can post some pictures of my solution if anyone is interested. Please do. Someone IS interested! :) ** Please note, Digium did not suggest this or condone this... ** Caveat emptor, please don't do it at home, we're trained professionals etc etc etc. ;) Juan __ Mensagem enviada usando o Webmail da ViaLink ver. 2.7.8 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] How many TDM2400P's will a server take?
How many TDM2400P cards can I safelly install in one PC? I'm loking for answers from whoever has a working scenario with * and a number of cards higher than one. Thx, Juan __ Mensagem enviada usando o Webmail da ViaLink ver. 2.7.8 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Re: How many TDM2400P's will a server take?
Ah -- for all intents and purposes, assume I can obtain the most kickass PC server hardware in the known Universe. So -- any real-life experiences out there? How many TDM2400P cards can I safelly install in one PC? I'm loking for answers from whoever has a working scenario with * and a number of cards higher than one. Thx, Juan __ Mensagem enviada usando o Webmail da ViaLink ver. 2.7.8 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] PING users of Manuel Guesdon's LDAP extensions
What do you use to administer the PBX accounts? (Please don't tell me LDIF text files). Any luck with Luma? (http://luma.sourceforge.net) __ Mensagem enviada usando o Webmail da ViaLink ver. 2.7.8 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Still the LDAP Realtime extension
OK, I've got the new schema installed and I was able to create oxyPBXAccountSIP objects. Now, how do I generate the MD5 values to put in the realmedPassword field? Thx, Juan __ Mensagem enviada usando o Webmail da ViaLink ver. 2.7.8 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
