Following zapata.conf works for us, interconnecting Asterisk - BCM.
Never tested with Alcatel though.
Jorge Mendoza
=
Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=es
context=from-zaptel
signalling=pri_cpe
switchtype=qsig
rxwink=300
I'm having the same trouble when the Alcatel-Asterisk
trunk has prefix meaning set to open routing
number.
I enabled overlapdial but still get the same behavior.
When it's set to routing number Asterisk receives
the full dialed number but it's limited to a maximum
of 8 digits.
Has anyone solved
In my experience, many times Qsig is mandatory for interconnection
between Asterisk and others PBX using PRI.
Jorge Mendoza
Vieri wrote:
I'm having the same trouble when the Alcatel-Asterisk
trunk has prefix meaning set to open routing
number.
I enabled overlapdial but still get the same
According to
http://www.voip-info.org/wiki/view/Alcatel+4400+via+PRI
the author had trouble with QSIG.
It would be great if you could give me an extract of
your zapata.conf in your successful QSIG setup. And
any other tip for that matter.
--- Jorge Mendoza [EMAIL PROTECTED] wrote:
In my
, 2007 11:50 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Alcatel - Asterisk setup
I'm having the same trouble when the Alcatel-Asterisk
trunk has prefix meaning set to open routing
number.
I enabled overlapdial but still get the same behavior
Hi all:
We are looking for someone with experience in Alcatel PBX - PRI -
Asterisk integration
Please get in touch off list.. We're wanting to hire a professional
subcontractor, developer or company to get around some issues like these:
Asterisk shows PRI to Alcatel is up, but when
Hi,
You need to enable overlapdial.
Regards,
Sahil Gupta
Chief Executive Officer
VoiceValley Group of Companies
Phone: +61-7-30188403
Fax: +61-7-30188499
On Tue, 29 May 2007, Carlos Hernandez wrote:
Hi all:
We are looking for someone with experience in Alcatel PBX - PRI - Asterisk
