RE: [Asterisk-Users] 2 x Eicon BRI ISDN devices (UK)
Hi Does that mean that I should set up the msn=* and add DDI's to the extensions.conf? I think that BT class the 1+1 as 'auxilary line working'. Rgds -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of asterisk Sent: 18 May 2005 14:28 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] 2 x Eicon BRI ISDN devices (UK) MSN will only work on 1 ISDN2 line and cannot be spread across 2 ISDN2 lines. From your description I assume you have 2 calls up and the 3rd call fails. This is because you can only have 2 concurrent calls using MSN on ISDN2. You will find you have a different number range for the second ISDN2 If you want to use both ISDN lines for incoming calls with the same number range then you will need to have the lines converted to 1 + 1 Auxiliary working and have the numbers delivered as DDI. Neil -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lee Norvall Sent: 18 May 2005 13:27 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] 2 x Eicon BRI ISDN devices (UK) Hi I can see what seems to be both devices in use, so I guess it must be down to the capi.conf (below), does this look correct ??? [interfaces] msn=292880 incomingmsn=292880, 292881, 292882, 292883, 292884, 292885, 292886, 292887, 292888, 292889 outgoingmsn=292880 controller=1 softdtmf=1 ;accountcode= context=demo ;echosquelch=1 ;echocancel=yes ;echotail=64 ;callgroup=1 ;deflect=12345678 devices=2 msn=292xxx incomingmsn=292880, 292881, 292882, 292883, 292884, 292885, 292886, 292887, 292888, 292889 outgoingmsn=292880 controller=2 softdtmf=1 ;accountcode= context=demo ;echosquelch=1 ;echocancel=yes ;echotail=64 ;callgroup=1 ;deflect=12345678 devices=2 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Armin Schindler Sent: 18 May 2005 12:50 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] 2 x Eicon BRI ISDN devices (UK) On Wed, 18 May 2005, Lee Norvall wrote: Hi I have installed 2 x Eicon BRI ISDN cards into a Suse 9.2 server. We can use all 4 lines for out going calls fine, but on incoming we can only use 2. On calling in using the main msn, the 3rd line gives a an engaged signal. I have unplugged 1 of the cards, and the other card takes the 2 calls. I then swapped this around, and this also works fine. But when using both cards, we can only use 2 line in. There are two possibilities: 1) your Telco doesn't send the 3rd call to your other line. You can verify that by using divactrl mlog -c 1 -o (diva_idi module must be leaded) and see if an incoming call is shown. (use -c 2 for the second card) 2) your configuration of chan_capi is not correct and the 3rd call is ignored/rejected. If you don't use DIVA Server cards with CAPI, forget this mail. Armin ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] 2 x Eicon BRI ISDN devices (UK)
Hi I have installed 2 x Eicon BRI ISDN cards into a Suse 9.2 server. We can use all 4 lines for out going calls fine, but on incoming we can only use 2. On calling in using the main msn, the 3rd line gives a an engaged signal. I have unplugged 1 of the cards, and the other card takes the 2 calls. I then swapped this around, and this also works fine. But when using both cards, we can only use 2 line in. Any ideas??? Rgds ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] 2 x Eicon BRI ISDN devices (UK)
On Wed, 18 May 2005, Lee Norvall wrote: Hi I have installed 2 x Eicon BRI ISDN cards into a Suse 9.2 server. We can use all 4 lines for out going calls fine, but on incoming we can only use 2. On calling in using the main msn, the 3rd line gives a an engaged signal. I have unplugged 1 of the cards, and the other card takes the 2 calls. I then swapped this around, and this also works fine. But when using both cards, we can only use 2 line in. There are two possibilities: 1) your Telco doesn't send the 3rd call to your other line. You can verify that by using divactrl mlog -c 1 -o (diva_idi module must be leaded) and see if an incoming call is shown. (use -c 2 for the second card) 2) your configuration of chan_capi is not correct and the 3rd call is ignored/rejected. If you don't use DIVA Server cards with CAPI, forget this mail. Armin ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] 2 x Eicon BRI ISDN devices (UK)
Hi I can see what seems to be both devices in use, so I guess it must be down to the capi.conf (below), does this look correct ??? [interfaces] msn=292880 incomingmsn=292880, 292881, 292882, 292883, 292884, 292885, 292886, 292887, 292888, 292889 outgoingmsn=292880 controller=1 softdtmf=1 ;accountcode= context=demo ;echosquelch=1 ;echocancel=yes ;echotail=64 ;callgroup=1 ;deflect=12345678 devices=2 msn=292xxx incomingmsn=292880, 292881, 292882, 292883, 292884, 292885, 292886, 292887, 292888, 292889 outgoingmsn=292880 controller=2 softdtmf=1 ;accountcode= context=demo ;echosquelch=1 ;echocancel=yes ;echotail=64 ;callgroup=1 ;deflect=12345678 devices=2 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Armin Schindler Sent: 18 May 2005 12:50 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] 2 x Eicon BRI ISDN devices (UK) On Wed, 18 May 2005, Lee Norvall wrote: Hi I have installed 2 x Eicon BRI ISDN cards into a Suse 9.2 server. We can use all 4 lines for out going calls fine, but on incoming we can only use 2. On calling in using the main msn, the 3rd line gives a an engaged signal. I have unplugged 1 of the cards, and the other card takes the 2 calls. I then swapped this around, and this also works fine. But when using both cards, we can only use 2 line in. There are two possibilities: 1) your Telco doesn't send the 3rd call to your other line. You can verify that by using divactrl mlog -c 1 -o (diva_idi module must be leaded) and see if an incoming call is shown. (use -c 2 for the second card) 2) your configuration of chan_capi is not correct and the 3rd call is ignored/rejected. If you don't use DIVA Server cards with CAPI, forget this mail. Armin ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] 2 x Eicon BRI ISDN devices (UK)
MSN will only work on 1 ISDN2 line and cannot be spread across 2 ISDN2 lines. From your description I assume you have 2 calls up and the 3rd call fails. This is because you can only have 2 concurrent calls using MSN on ISDN2. You will find you have a different number range for the second ISDN2 If you want to use both ISDN lines for incoming calls with the same number range then you will need to have the lines converted to 1 + 1 Auxiliary working and have the numbers delivered as DDI. Neil -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lee Norvall Sent: 18 May 2005 13:27 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] 2 x Eicon BRI ISDN devices (UK) Hi I can see what seems to be both devices in use, so I guess it must be down to the capi.conf (below), does this look correct ??? [interfaces] msn=292880 incomingmsn=292880, 292881, 292882, 292883, 292884, 292885, 292886, 292887, 292888, 292889 outgoingmsn=292880 controller=1 softdtmf=1 ;accountcode= context=demo ;echosquelch=1 ;echocancel=yes ;echotail=64 ;callgroup=1 ;deflect=12345678 devices=2 msn=292xxx incomingmsn=292880, 292881, 292882, 292883, 292884, 292885, 292886, 292887, 292888, 292889 outgoingmsn=292880 controller=2 softdtmf=1 ;accountcode= context=demo ;echosquelch=1 ;echocancel=yes ;echotail=64 ;callgroup=1 ;deflect=12345678 devices=2 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Armin Schindler Sent: 18 May 2005 12:50 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] 2 x Eicon BRI ISDN devices (UK) On Wed, 18 May 2005, Lee Norvall wrote: Hi I have installed 2 x Eicon BRI ISDN cards into a Suse 9.2 server. We can use all 4 lines for out going calls fine, but on incoming we can only use 2. On calling in using the main msn, the 3rd line gives a an engaged signal. I have unplugged 1 of the cards, and the other card takes the 2 calls. I then swapped this around, and this also works fine. But when using both cards, we can only use 2 line in. There are two possibilities: 1) your Telco doesn't send the 3rd call to your other line. You can verify that by using divactrl mlog -c 1 -o (diva_idi module must be leaded) and see if an incoming call is shown. (use -c 2 for the second card) 2) your configuration of chan_capi is not correct and the 3rd call is ignored/rejected. If you don't use DIVA Server cards with CAPI, forget this mail. Armin ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users