[Asterisk-Users] Adtran 750 DID question.
Hello All, I've mostly solved my DID problem from a few days ago. Apparenly the lines weren't configured properly. Now heres the next question. 12 EM wink lines from telco. I have them all plugging into an Adtran 750 with FXS cards. The Adtran ports are configured DPO. How do I signal this from Zaptel. I have them setup EM in zaptel.conf and EM_W in zapata.conf. They work, however, no DNIS info is being passed. Do I need to signal these something different like loopstart or kewlstart, so the DNIS info gets passed? I watch the Tx/Rx bits from zttool, and everything looks okay coming from the Adtran. It looks like asterisk isn't winking properly. When I had the lines misconfigured for fxs_ls the DNIS info was passing fine. I'm running zaptel-0.8.0 libpri-0.5.1 And asterisk CVS from 12/23/2003 RedHat 8.0 Dual 2.4 Xeon Processors (hyperthreading disabled) 2Gig Memory Any help would be greatly appreciated. Regards, -sb ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Adtran 750 DID question.
Hello All, I've mostly solved my DID problem from a few days ago. Apparenly the lines weren't configured properly. Now heres the next question. 12 EM wink lines from telco. I have them all plugging into an Adtran 750 with FXS cards. The Adtran ports are configured DPO. How do I signal this from Zaptel. I have them setup EM in zaptel.conf and EM_W in zapata.conf. They work, however, no DNIS info is being passed. Do I need to signal these something different like loopstart or kewlstart, so the DNIS info gets passed? I watch the Tx/Rx bits from zttool, and everything looks okay coming from the Adtran. It looks like asterisk isn't winking properly. I had a similar problem. I ended up setting the trunks to either just plain em or featd (I don't remember). I chased through the chan_zap source code and decided (maybe incorrectly) that asterisk doesn't look for DNIS digits in EM Wink mode. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Adtran 750 DID question.
I tried both featd and em in zapata.conf, to no avail. I restarted in between all changes. Is it possible to signal the DPO ports on the 750 with fxo_ls or fxo_ks? This is the last piece to my DID puzzle. Anyone else with experience on this oddball config? Thanks, -sb -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of James Sharp Sent: Friday, January 30, 2004 11:52 AM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Adtran 750 DID question. Hello All, I've mostly solved my DID problem from a few days ago. Apparenly the lines weren't configured properly. Now heres the next question. 12 EM wink lines from telco. I have them all plugging into an Adtran 750 with FXS cards. The Adtran ports are configured DPO. How do I signal this from Zaptel. I have them setup EM in zaptel.conf and EM_W in zapata.conf. They work, however, no DNIS info is being passed. Do I need to signal these something different like loopstart or kewlstart, so the DNIS info gets passed? I watch the Tx/Rx bits from zttool, and everything looks okay coming from the Adtran. It looks like asterisk isn't winking properly. I had a similar problem. I ended up setting the trunks to either just plain em or featd (I don't remember). I chased through the chan_zap source code and decided (maybe incorrectly) that asterisk doesn't look for DNIS digits in EM Wink mode. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Adtran 750 DID question.
Did you say you were using Adtran FXS cards? Bisker, Scott (7805) wrote: Hello All, I've mostly solved my DID problem from a few days ago. Apparenly the lines weren't configured properly. Now heres the next question. 12 EM wink lines from telco. I have them all plugging into an Adtran 750 with FXS cards. The Adtran ports are configured DPO. How do I signal this from Zaptel. I have them setup EM in zaptel.conf and EM_W in zapata.conf. They work, however, no DNIS info is being passed. Do I need to signal these something different like loopstart or kewlstart, so the DNIS info gets passed? I watch the Tx/Rx bits from zttool, and everything looks okay coming from the Adtran. It looks like asterisk isn't winking properly. When I had the lines misconfigured for fxs_ls the DNIS info was passing fine. I'm running zaptel-0.8.0 libpri-0.5.1 And asterisk CVS from 12/23/2003 RedHat 8.0 Dual 2.4 Xeon Processors (hyperthreading disabled) 2Gig Memory Any help would be greatly appreciated. Regards, -sb ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Adtran 750 DID question.
Yes. Adtran FXS cards. Did you say you were using Adtran FXS cards? Bisker, Scott (7805) wrote: Hello All, I've mostly solved my DID problem from a few days ago. Apparenly the lines weren't configured properly. Now heres the next question. 12 EM wink lines from telco. I have them all plugging into an Adtran 750 with FXS cards. The Adtran ports are configured DPO. How do I signal this from Zaptel. I have them setup EM in zaptel.conf and EM_W in zapata.conf. They work, however, no DNIS info is being passed. Do I need to signal these something different like loopstart or kewlstart, so the DNIS info gets passed? I watch the Tx/Rx bits from zttool, and everything looks okay coming from the Adtran. It looks like asterisk isn't winking properly. When I had the lines misconfigured for fxs_ls the DNIS info was passing fine. I'm running zaptel-0.8.0 libpri-0.5.1 And asterisk CVS from 12/23/2003 RedHat 8.0 Dual 2.4 Xeon Processors (hyperthreading disabled) 2Gig Memory Any help would be greatly appreciated. Regards, -sb ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Adtran 750 DID question.
Shouldn't they be FXO cards for CO lines? Bisker, Scott (7805) wrote: Yes. Adtran FXS cards. Did you say you were using Adtran FXS cards? Bisker, Scott (7805) wrote: Hello All, I've mostly solved my DID problem from a few days ago. Apparenly the lines weren't configured properly. Now heres the next question. 12 EM wink lines from telco. I have them all plugging into an Adtran 750 with FXS cards. The Adtran ports are configured DPO. How do I signal this from Zaptel. I have them setup EM in zaptel.conf and EM_W in zapata.conf. They work, however, no DNIS info is being passed. Do I need to signal these something different like loopstart or kewlstart, so the DNIS info gets passed? I watch the Tx/Rx bits from zttool, and everything looks okay coming from the Adtran. It looks like asterisk isn't winking properly. When I had the lines misconfigured for fxs_ls the DNIS info was passing fine. I'm running zaptel-0.8.0 libpri-0.5.1 And asterisk CVS from 12/23/2003 RedHat 8.0 Dual 2.4 Xeon Processors (hyperthreading disabled) 2Gig Memory Any help would be greatly appreciated. Regards, -sb ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users