Hi,
Im
trying to connect * to Nortel BCM 50, This PBX use H.323 v3 to interface with
other PBX. The port use to connect is TCP 1720 but I cant configure this
port on my * box. Im using a H.323.conf file sample to activate the port
but the * isnt listening there. Somebody have any idea or tip?
This is mi H.323.conf
[general]
port = 1720
bindaddr = 192.168.0.200
;tos=lowdelay
;
;
amaflags = default
;
;
;accountcode=lss0101
;
;
allow=all
; turns on all installed codecs
;disallow=g723.1
; Hm... Proprietary, don't use it...
;allow=gsm
; Always allow GSM, it's cool :)
;allow=ulaw
; User-Input Mode ( DTMF )
;
; valid entries are: rfc2833, inband
; default is rfc2833
dtmfmode=rfc2833
;
; Set the gatekeeper
;
DISCOVER
- Find the Gk address using multicast
;
DISABLE
- Disable the use of a GK
; IP address or Host name - The acutal
IP address or hostname of your GK
;gatekeeper = DISABLE
;
Tell Asterisk whether or not to accept Gatekeeper routed
calls or not. Normally
this should always be set to yes, unless you want to have
finer control over wh
ch users are allowed access to Asterisk. Default: YES
;
AllowGKRouted = yes
;
Default context gets used in siutations where you are using
the GK routed model
or no type=user was found. This gives you the ability to
either play an invalid
message or to simply not use user
authentication at all.
Thanks in advance.
Pedro.
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users