ztcfg - works, too.. after a timing source change... power cycle
works.
-
Yeah, we rocked the vote all right. Those little
bastards betrayed us again.
- Hunter S. Thompson on the 2004 election.
On Fri, 4 Mar 2005, Steven Critchfield wrote:
Hello,
I have searched and searched, and come up with nothing. I am running Asterisk
with a wcte110p configured for t1. Our PRI is staying up, and we can make
calls however our service provider's logs are flooding with errors and we are
getting lots of HDLC Abort (6) on Primary D-Channel
On Fri, 2005-03-04 at 15:27 -0700, Tom wrote:
Hello,
I have searched and searched, and come up with nothing. I am running Asterisk
with a wcte110p configured for t1. Our PRI is staying up, and we can make
calls however our service provider's logs are flooding with errors and we are
getting
Thanks for the quick reply,
we didn't reboot we'll try that, and I've been planning on building a new
kernel, I know the fc kernels have issues... I'll report back after I try these
two things.
On another note we just did some wire tracing and it might be an issue of
wiring... We have an adtran
Tom wrote:
we didn't reboot we'll try that, and I've been planning on building a new
kernel, I know the fc kernels have issues... I'll report back after I try these
two things.
FYI We are running asterisk with a PRI on FC3 with no problems
Trev
___
Most T1 circuits are delivered via HDSL2 these days. Hence the single
pair.
On Mar 4, 2005, at 5:07 PM, Tom wrote:
Thanks for the quick reply,
we didn't reboot we'll try that, and I've been planning on building a
new
kernel, I know the fc kernels have issues... I'll report back after I
try