List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Unable to make outbound calls
Sorry. I don't get many opportunities to test this system as its live. Here
are the results:
-- Executing [...@dlpn_dialplan1:1] Dial(SIP/19722-b650fb80, DAHDI/1)
in new stack
-- Requested
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Unable to make outbound calls
I attached the show channels in my first post, but removed it to reduce the
length of replies. Here it is again along with show status.
Note that there is only 1 PRI currently
...@lists.digium.com] On Behalf Of Kal Feher
Sent: Tuesday, May 26, 2009 8:22 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Unable to make outbound calls
Sorry. I don't get many opportunities to test this system as its live. Here
are the results
, May 26, 2009 8:22 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Unable to make outbound calls
Sorry. I don't get many opportunities to test this system as its live. Here
are the results:
-- Executing [...@dlpn_dialplan1:1] Dial(SIP/19722
Discussion
Subject: Re: [asterisk-users] Unable to make outbound calls
Sorry. I don't get many opportunities to test this system as its live. Here
are the results:
-- Executing [...@dlpn_dialplan1:1] Dial(SIP/19722-b650fb80, DAHDI/1)
in new stack
-- Requested transfer capability: 0x00
...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Kal Feher
Sent: Tuesday, May 19, 2009 11:22 AM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] Unable to make outbound calls
Can you make an outbound call after your first incoming call? That's what
] On Behalf Of Kal Feher
Sent: Wednesday, May 20, 2009 2:55 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Unable to make outbound calls
I attached the show channels in my first post, but removed it to reduce the
length of replies. Here it is again along
I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2
I've got a 2 port T2XXP card attached with on T1 currently plugged in.
Inbound calls work fine, but outbound fail with the rather cryptic:
[May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full: Unable to
create
-users@lists.digium.com
Subject: [asterisk-users] Unable to make outbound calls
I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2
I've got a 2 port T2XXP card attached with on T1 currently plugged in.
Inbound calls work fine, but outbound fail with the rather cryptic:
[May 19 17
Subject: Re: [asterisk-users] Unable to make outbound calls
Can you make an outbound call after your first incoming call? That's what
I
experienced with 1.4.24.
No I can't. I saw similar threads while searching for a solution, but in my
case outbound calls are never possible.
Regardless, thank
Can you make an outbound call after your first incoming call? That's what I
experienced with 1.4.24.
No I can't. I saw similar threads while searching for a solution, but in my
case outbound calls are never possible.
Regardless, thank you for your suggestion.
On 19/5/09 4:47 PM, Kal Feher
On 6/18/05, Balaji NJL [EMAIL PROTECTED] wrote:
Hi All,
I am a new bee to *. I just installed [EMAIL PROTECTED] on
FC3. I hv a FXO card. I hv configured two extensions
one x-lite and other iaxComm. I configured * using
AMP. The following setup works
- x-lite (x 200) to iaxComm (x 201)
-
-- Time Bandit [EMAIL PROTECTED] wrote:
On 6/18/05, Balaji NJL [EMAIL PROTECTED] wrote:
Hi All,
I am a new bee to *. I just installed
[EMAIL PROTECTED] on
FC3. I hv a FXO card. I hv configured two
extensions
one x-lite and other iaxComm. I configured * using
AMP. The following
i hv set the verbose level to 4 and this is the
output.
-
Accepting AUTHENTICATED call from 192.168.0.64,
requested format = 2, act
ual format = 2
-- Executing Macro(IAX2/[EMAIL PROTECTED]/4,
dialout-trunk|1|7857303|) in new stac
k
--
Hi All,
I am a new bee to *. I just installed [EMAIL PROTECTED] on
FC3. I hv a FXO card. I hv configured two extensions
one x-lite and other iaxComm. I configured * using
AMP. The following setup works
- x-lite (x 200) to iaxComm (x 201)
- PSTN to x-lite
- PSTN to iaxComm
Voice mail, weather etc
15 matches
Mail list logo
