Re: [asterisk-users] A bit OT - Configure GoIP for Asterisk
On Mon, 2 Oct 2017, Antony Stone wrote: On Monday 02 October 2017 at 20:58:33, Steve Edwards wrote: I recently received a GoIP-32 for a client project -- primarily outbound calling. How should a GoIP be configured for Asterisk? Have you tried http://www.hybertone.com/en/solutionsClass.asp?Id=78 Thanks, but no joy. When I first power up the box, 'sip show peers' shows: Name/username Host Dyn Forcerport Comedia ACL Port Status Description goip/goip (Unspecified) D YesYes 0OK (5 ms) But then a few seconds later it shows: Name/username Host Dyn Forcerport Comedia ACL Port Status Description goip/goip (Unspecified) D YesYes 0UNKNOWN Every few seconds I get 'empty' SIP debug messages on the console like: <--- SIP read from UDP:192.168.0.51:5087 ---> <-> Wireshark says they're only 3 bytes long and contain 'SIP'. When I dial, I get: -- Executing [*@newline:6] Dial("SIP/poly-e637-00cb", "sip/goip/xx") in new stack == Everyone is busy/congested at this time (1:0/0/1) No SIP messages are displayed -- I'm guessing that's a result of the 'status UNKNOWN'. -- Thanks in advance, - Steve Edwards sedwa...@sedwards.com Voice: +1-760-468-3867 PST https://www.linkedin.com/in/steve-edwards-4244281 -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] A bit OT - Configure GoIP for Asterisk
On Monday 02 October 2017 at 20:58:33, Steve Edwards wrote: > I recently received a GoIP-32 for a client project -- primarily outbound > calling. > > How should a GoIP be configured for Asterisk? Have you tried http://www.hybertone.com/en/solutionsClass.asp?Id=78 Antony. -- Police have found a cartoonist dead in his house. They say that details are currently sketchy. Please reply to the list; please *don't* CC me. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] A bit OT - Configure GoIP for Asterisk
I recently received a GoIP-32 for a client project -- primarily outbound calling. How should a GoIP be configured for Asterisk? No fancy shmancy Elastix or FPBX GUI -- just using the configuration files. Single Server Mode, Config By Line, and Trunk Gateway Mode all seem likely suspects. How did you configure your GoIP and why? What do your relevant sip.conf section(s) look like? What does your dial command look like? So far, all I've got out of it is a 503 Declined. -- Thanks in advance, - Steve Edwards sedwa...@sedwards.com Voice: +1-760-468-3867 PST https://www.linkedin.com/in/steve-edwards-4244281 -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users