Re: [asterisk-users] Alcatel - Asterisk setup
Following zapata.conf works for us, interconnecting Asterisk - BCM. Never tested with Alcatel though. Jorge Mendoza = Zapata telephony interface ; ; Configuration file [trunkgroups] [channels] language=es context=from-zaptel signalling=pri_cpe switchtype=qsig rxwink=300 loadzone=pe defaultzone=pe channel = 1-15,17-31 ;for E1 callerid=asreceived usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes echotraining=400 rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no busydetect=yes busycount=6 callprogress=yes faxdetect=incoming Vieri wrote: According to http://www.voip-info.org/wiki/view/Alcatel+4400+via+PRI the author had trouble with QSIG. It would be great if you could give me an extract of your zapata.conf in your successful QSIG setup. And any other tip for that matter. --- Jorge Mendoza [EMAIL PROTECTED] wrote: In my experience, many times Qsig is mandatory for interconnection between Asterisk and others PBX using PRI. Jorge Mendoza Vieri wrote: I'm having the same trouble when the Alcatel-Asterisk trunk has prefix meaning set to open routing number. I enabled overlapdial but still get the same behavior. When it's set to routing number Asterisk receives the full dialed number but it's limited to a maximum of 8 digits. Has anyone solved this open routing number issue that passes only the first digit and ignores the rest? --- Sahil Gupta [EMAIL PROTECTED] wrote: Hi, You need to enable overlapdial. Regards, Sahil Gupta Chief Executive Officer VoiceValley Group of Companies Phone: +61-7-30188403 Fax: +61-7-30188499 On Tue, 29 May 2007, Carlos Hernandez wrote: Hi all: We are looking for someone with experience in Alcatel PBX - PRI - Asterisk integration Please get in touch off list.. We're wanting to hire a professional subcontractor, developer or company to get around some issues like these: Asterisk shows PRI to Alcatel is up, but when trying to dial from Alcatel to Asterisk results in a disc tone (Asterisk do send calls properly into Alcatel) If / when we manage to get anything from Alcatel, we get just the first digit of the number the user is intending to call.. Asterisk expects the whole number at once, so it fails.. Most of the time we get nothing at all from Alcatel, we think something is missing, so Alcatel sees the link is down. Please let me know if you have done this type of work before. We are not wanting to involve the Alcatel people, unless really required. Is there any special way to set up zaptel/zapata so Alcatel detects the PRI to be operational? Is there any special way to receive the calls once the PRI is up? Right now asterisk is set with: pri_net Any information or hints will be greatly appreciated Thank you, Carlos NZ You snooze, you lose. Get messages ASAP with AutoCheck in the all-new Yahoo! Mail Beta. http://advision.webevents.yahoo.com/mailbeta/newmail_html.html ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Alcatel - Asterisk setup
I'm having the same trouble when the Alcatel-Asterisk trunk has prefix meaning set to open routing number. I enabled overlapdial but still get the same behavior. When it's set to routing number Asterisk receives the full dialed number but it's limited to a maximum of 8 digits. Has anyone solved this open routing number issue that passes only the first digit and ignores the rest? --- Sahil Gupta [EMAIL PROTECTED] wrote: Hi, You need to enable overlapdial. Regards, Sahil Gupta Chief Executive Officer VoiceValley Group of Companies Phone: +61-7-30188403 Fax: +61-7-30188499 On Tue, 29 May 2007, Carlos Hernandez wrote: Hi all: We are looking for someone with experience in Alcatel PBX - PRI - Asterisk integration Please get in touch off list.. We're wanting to hire a professional subcontractor, developer or company to get around some issues like these: Asterisk shows PRI to Alcatel is up, but when trying to dial from Alcatel to Asterisk results in a disc tone (Asterisk do send calls properly into Alcatel) If / when we manage to get anything from Alcatel, we get just the first digit of the number the user is intending to call.. Asterisk expects the whole number at once, so it fails.. Most of the time we get nothing at all from Alcatel, we think something is missing, so Alcatel sees the link is down. Please let me know if you have done this type of work before. We are not wanting to involve the Alcatel people, unless really required. Is there any special way to set up zaptel/zapata so Alcatel detects the PRI to be operational? Is there any special way to receive the calls once the PRI is up? Right now asterisk is set with: pri_net Any information or hints will be greatly appreciated Thank you, Carlos NZ Shape Yahoo! in your own image. Join our Network Research Panel today! http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Alcatel - Asterisk setup
In my experience, many times Qsig is mandatory for interconnection between Asterisk and others PBX using PRI. Jorge Mendoza Vieri wrote: I'm having the same trouble when the Alcatel-Asterisk trunk has prefix meaning set to open routing number. I enabled overlapdial but still get the same behavior. When it's set to routing number Asterisk receives the full dialed number but it's limited to a maximum of 8 digits. Has anyone solved this open routing number issue that passes only the first digit and ignores the rest? --- Sahil Gupta [EMAIL PROTECTED] wrote: Hi, You need to enable overlapdial. Regards, Sahil Gupta Chief Executive Officer VoiceValley Group of Companies Phone: +61-7-30188403 Fax: +61-7-30188499 On Tue, 29 May 2007, Carlos Hernandez wrote: Hi all: We are looking for someone with experience in Alcatel PBX - PRI - Asterisk integration Please get in touch off list.. We're wanting to hire a professional subcontractor, developer or company to get around some issues like these: Asterisk shows PRI to Alcatel is up, but when trying to dial from Alcatel to Asterisk results in a disc tone (Asterisk do send calls properly into Alcatel) If / when we manage to get anything from Alcatel, we get just the first digit of the number the user is intending to call.. Asterisk expects the whole number at once, so it fails.. Most of the time we get nothing at all from Alcatel, we think something is missing, so Alcatel sees the link is down. Please let me know if you have done this type of work before. We are not wanting to involve the Alcatel people, unless really required. Is there any special way to set up zaptel/zapata so Alcatel detects the PRI to be operational? Is there any special way to receive the calls once the PRI is up? Right now asterisk is set with: pri_net Any information or hints will be greatly appreciated Thank you, Carlos NZ Shape Yahoo! in your own image. Join our Network Research Panel today! http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Alcatel - Asterisk setup
According to http://www.voip-info.org/wiki/view/Alcatel+4400+via+PRI the author had trouble with QSIG. It would be great if you could give me an extract of your zapata.conf in your successful QSIG setup. And any other tip for that matter. --- Jorge Mendoza [EMAIL PROTECTED] wrote: In my experience, many times Qsig is mandatory for interconnection between Asterisk and others PBX using PRI. Jorge Mendoza Vieri wrote: I'm having the same trouble when the Alcatel-Asterisk trunk has prefix meaning set to open routing number. I enabled overlapdial but still get the same behavior. When it's set to routing number Asterisk receives the full dialed number but it's limited to a maximum of 8 digits. Has anyone solved this open routing number issue that passes only the first digit and ignores the rest? --- Sahil Gupta [EMAIL PROTECTED] wrote: Hi, You need to enable overlapdial. Regards, Sahil Gupta Chief Executive Officer VoiceValley Group of Companies Phone: +61-7-30188403 Fax: +61-7-30188499 On Tue, 29 May 2007, Carlos Hernandez wrote: Hi all: We are looking for someone with experience in Alcatel PBX - PRI - Asterisk integration Please get in touch off list.. We're wanting to hire a professional subcontractor, developer or company to get around some issues like these: Asterisk shows PRI to Alcatel is up, but when trying to dial from Alcatel to Asterisk results in a disc tone (Asterisk do send calls properly into Alcatel) If / when we manage to get anything from Alcatel, we get just the first digit of the number the user is intending to call.. Asterisk expects the whole number at once, so it fails.. Most of the time we get nothing at all from Alcatel, we think something is missing, so Alcatel sees the link is down. Please let me know if you have done this type of work before. We are not wanting to involve the Alcatel people, unless really required. Is there any special way to set up zaptel/zapata so Alcatel detects the PRI to be operational? Is there any special way to receive the calls once the PRI is up? Right now asterisk is set with: pri_net Any information or hints will be greatly appreciated Thank you, Carlos NZ You snooze, you lose. Get messages ASAP with AutoCheck in the all-new Yahoo! Mail Beta. http://advision.webevents.yahoo.com/mailbeta/newmail_html.html ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] Alcatel - Asterisk setup
Sahil, Start here, http://www.alcatelunleashed.com/viewtopic.php?f=44t=840 http://www.alcatelunleashed.com/viewtopic.php?f=44p=8595 John Treble Ottawa, Canada -Original Message- From: [EMAIL PROTECTED] [mailto:asterisk-users- [EMAIL PROTECTED] On Behalf Of Vieri Sent: May 29, 2007 11:50 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Alcatel - Asterisk setup I'm having the same trouble when the Alcatel-Asterisk trunk has prefix meaning set to open routing number. I enabled overlapdial but still get the same behavior. When it's set to routing number Asterisk receives the full dialed number but it's limited to a maximum of 8 digits. Has anyone solved this open routing number issue that passes only the first digit and ignores the rest? --- Sahil Gupta [EMAIL PROTECTED] wrote: Hi, You need to enable overlapdial. Regards, Sahil Gupta Chief Executive Officer VoiceValley Group of Companies Phone: +61-7-30188403 Fax: +61-7-30188499 On Tue, 29 May 2007, Carlos Hernandez wrote: Hi all: We are looking for someone with experience in Alcatel PBX - PRI - Asterisk integration Please get in touch off list.. We're wanting to hire a professional subcontractor, developer or company to get around some issues like these: Asterisk shows PRI to Alcatel is up, but when trying to dial from Alcatel to Asterisk results in a disc tone (Asterisk do send calls properly into Alcatel) If / when we manage to get anything from Alcatel, we get just the first digit of the number the user is intending to call.. Asterisk expects the whole number at once, so it fails.. Most of the time we get nothing at all from Alcatel, we think something is missing, so Alcatel sees the link is down. Please let me know if you have done this type of work before. We are not wanting to involve the Alcatel people, unless really required. Is there any special way to set up zaptel/zapata so Alcatel detects the PRI to be operational? Is there any special way to receive the calls once the PRI is up? Right now asterisk is set with: pri_net Any information or hints will be greatly appreciated Thank you, Carlos NZ __ __Shape Yahoo! in your own image. Join our Network Research Panel today! http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Alcatel - Asterisk setup
Hi all: We are looking for someone with experience in Alcatel PBX - PRI - Asterisk integration Please get in touch off list.. We're wanting to hire a professional subcontractor, developer or company to get around some issues like these: Asterisk shows PRI to Alcatel is up, but when trying to dial from Alcatel to Asterisk results in a disc tone (Asterisk do send calls properly into Alcatel) If / when we manage to get anything from Alcatel, we get just the first digit of the number the user is intending to call.. Asterisk expects the whole number at once, so it fails.. Most of the time we get nothing at all from Alcatel, we think something is missing, so Alcatel sees the link is down. Please let me know if you have done this type of work before. We are not wanting to involve the Alcatel people, unless really required. Is there any special way to set up zaptel/zapata so Alcatel detects the PRI to be operational? Is there any special way to receive the calls once the PRI is up? Right now asterisk is set with: pri_net Any information or hints will be greatly appreciated Thank you, Carlos NZ ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Alcatel - Asterisk setup
Hi, You need to enable overlapdial. Regards, Sahil Gupta Chief Executive Officer VoiceValley Group of Companies Phone: +61-7-30188403 Fax: +61-7-30188499 On Tue, 29 May 2007, Carlos Hernandez wrote: Hi all: We are looking for someone with experience in Alcatel PBX - PRI - Asterisk integration Please get in touch off list.. We're wanting to hire a professional subcontractor, developer or company to get around some issues like these: Asterisk shows PRI to Alcatel is up, but when trying to dial from Alcatel to Asterisk results in a disc tone (Asterisk do send calls properly into Alcatel) If / when we manage to get anything from Alcatel, we get just the first digit of the number the user is intending to call.. Asterisk expects the whole number at once, so it fails.. Most of the time we get nothing at all from Alcatel, we think something is missing, so Alcatel sees the link is down. Please let me know if you have done this type of work before. We are not wanting to involve the Alcatel people, unless really required. Is there any special way to set up zaptel/zapata so Alcatel detects the PRI to be operational? Is there any special way to receive the calls once the PRI is up? Right now asterisk is set with: pri_net Any information or hints will be greatly appreciated Thank you, Carlos NZ ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users