I am using asterisk 1.4.26.2 and cisco call manager 6.1
I am getting a 503 service unavailable message CCM.
Incoming calls work, outgoing calls get 503 message.
What do I do about this???
Jerry
--
Asterisk is sending the OPTION:
09/08/2009 18:55:03.150
Warning: 399 Routing failed: ccbid=6361 socket=ast_server:5060
Confirm the Cisco CM can ping ast_server. Also try using the IP address
versus a name.
Dean
Jerry Geis wrote:
I am using asterisk 1.4.26.2 and cisco call manager 6.1
I am getting a 503 service unavailable message CCM.
Warning: 399 Routing failed: ccbid=6361 socket=ast_server:5060
Confirm the Cisco CM can ping ast_server. Also try using the IP address
versus a name.
Dean
Dean
I have asked the person onsite to try the ping...
Actually we are using IP address and not names. I just change to a
Jerry,
I'm assuming that you mean that Cisco calls are making it to Asterisk,
but Asterisk calls are getting the rejection.
Looking at this again, there is probably not a network path issue since
packets are being sent and received.
Doing some quick research on what Cisco defines as a 503
...@lists.digium.com] On Behalf Of Jimmy
Ezell
Sent: Thursday, June 11, 2009 2:05 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Asterisk to CCM
Still no luck getting this to work. I have been looking
: [asterisk-users] Asterisk to CCM
As you can see below I am striping off the 8 before it ever goes
to CCM in the extensions.conf file.
exten =
_8XXX,1,Dial(${CISCOTRUNK}/${EXTEN:1...@172.16.200.10:1720)
I have the H323 gateway in CCM configured to use
On Thu, Jun 11, 2009 at 5:04 PM, Jimmy Ezelljez...@hmhca.com wrote:
Still no luck getting this to work. I have been looking at the CallManager
Logs but so far that is worse then useless. Anyone out there have any luck
connecting Asterisk 1.4 and Cisco CallManager 3.3(5)?
Not exactly. We
-users] Asterisk to CCM
Make sure you are stripping the 8 on inbound calls to that H323
gateway
under CCM and that it has a valid search space to find your
extensions...
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun
Hit another problem in my tutorial in converting over from Cisco
CallManager to Asterisk.
I have been following the instructions at :
http://voip-info.capatres.com/wiki/view/Asterisk+Cisco+CallManager+Integ
ration.html on intergrating Asterisk and Cisco CallManager.
I can make calls from CCM to
:13 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Asterisk to CCM
Hit another problem in my tutorial in converting over from Cisco CallManager to
Asterisk.
I have been following the instructions at :
http://voip-info.capatres.com/wiki/view/Asterisk+Cisco
On Fri, 2007-06-01 at 10:18 +0530, Vamsi Pottangi wrote:
Hi Greg,
Narrowed the problem ot be that of codec mismatch ;-) Damn
CCM, doesn't provide proper debugs.
I have another query with CCM and Asterisk integration. In CCM cluster
Phones register to 1st CCM and they fallback to 2nd
Hi Greg,
Narrowed the problem ot be that of codec mismatch ;-) Damn
CCM, doesn't provide proper debugs.
I have another query with CCM and Asterisk integration. In CCM cluster
Phones register to 1st CCM and they fallback to 2nd incase the first fails
and 3rd CCM incase even 2nd fails. How can
Hi,
I was able to work out SIP trunk between Asterisk and CCM 4.x without
any issues. Whereas SIP trunk in CCM 5.x is not working with Asterisk.
Asterisk is sending OPTIONS messages to CCM 5.x for which CCM is not
replying. For the same reason Asterisk is marking it as UNREACHABLE.
Anybody got
On Wed, 2007-05-23 at 19:53 +0530, Vamsi Pottangi wrote:
Hi,
I was able to work out SIP trunk between Asterisk and CCM 4.x without
any issues. Whereas SIP trunk in CCM 5.x is not working with Asterisk.
Asterisk is sending OPTIONS messages to CCM 5.x for which CCM is not
replying. For the
I am trying to setup Asterisk as the voicemail server for Cisco Call Manager. I
have just about everything working except for the message waiting indicator.
I have the following setup in context [ccm] in my extensions.conf file:
;MWI
exten = _2807XXX,1,SetCallerID(${EXTEN:3})
exten =
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Asterisk to CCM
Hi Brian,
Calling search space is correct?
Dinesh.
On Mon, 26 Sep 2005, Brian J. Rathman wrote:
I am currently trying to send calls from Asterisk to Cisco Call Manager 4.0
and vice versa. I
:[EMAIL PROTECTED]
Sent: Monday, September 26, 2005 1:54 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Asterisk to CCM
Are you using CCM to operate your gateway with MGCP? If so, I had to
change the default timers under CCM advanced setup for Media
One way audio in my experience is always a firewall issue.
-Original Message-
From: Arnaldo M. Pereira [mailto:[EMAIL PROTECTED]
Sent: Monday, September 26, 2005 1:15 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Asterisk to CCM
Have you
Hi Brian,
Calling search space is correct?
Dinesh.
On Mon, 26 Sep 2005, Brian J. Rathman wrote:
I am currently trying to send calls from Asterisk to Cisco Call Manager 4.0
and vice versa. I have a SIP trunk setup in CCM and I also have an entry in
my sip.conf file for CCM.
I am currently trying to send calls from Asterisk to Cisco Call Manager 4.0 and
vice versa. I have a SIP trunk setup in CCM and I also have an entry in my
sip.conf file for CCM. Unfortunately, when I try and send a call to CCM I keep
getting:
SIP/10.0.0.1-9c18 is circuit-busy
== Everyone is
Have you read http://www.voip-info.org/tiki-index.php?page=Asterisk%
20Cisco%20CallManager%20Integration ?
I've followed these steps and I can make calls from a CCM client to
Asterisk, but the end point at the Asterisk side can't hear any audio.
On Mon, 2005-09-26 at 12:28 -0400, Brian J.
Are you using CCM to operate your gateway with MGCP? If so, I had to
change the default timers under CCM advanced setup for Media exchange
timers or the call was timing out at 4 seconds. If the setup was
complete prior, it worked fine, but after 4 seconds q.931 from CCM would
tear down the
Hey,
I'm currently developing asterisk for use on my university's system, and
we're in the process of hooking it up to the main network to allow for
on/off-campus calling. Does anyone know of a way, through ip, of having
the server communicate directly to a cisco catalyst 6608 blade to make
OK - I have an cisco MGCP gateway controlled by a Cisco Call manager.
There is a gatekeeper controlled 323 trunk between callmanager and
asterisk (we use asterisk for vmail, sip phones, park/pick/meetme, etc..).
We are using GK routed mode in gnugk. All extensions in h323.conf and
callmanager
24 matches
Mail list logo