Update,
Still not sorted, I have checked some tools on the TrixBox and using
the wanrouter I was able to check the voltage on lines.
The three result are when there is no call active
[EMAIL PROTECTED] ~]# wanpipemon -i w1g1 -c astats -m 1
--- Voltage Status (FXO,port 0) ---
On Wed, 19 Mar 2008 10:10:21 + (GMT), Gordon Henderson
[EMAIL PROTECTED] wrote:
I got free installation for Featureline Compact
on 3 yr contract.
So it saved me £££s!
Intersting... But shouldn't you be using VoIP for your calls anyway...
Then just one basic BT line, and a
On Tue, 18 Mar 2008 14:50:52 + (GMT), Gordon Henderson
[EMAIL PROTECTED] wrote:
BT nearly always try to sell featureline on business lines these days.
Would sir like a 3 of 5 year feature line contract?
Fair point, Gordon.
But in their defence, I got free installation for Featureline
On Tue, 18 Mar 2008 14:06:44 +, Paul Goodyear [EMAIL PROTECTED]
wrote:
Hi,
I have a TrixBox install with a Sangoma A200 and 4 FXO ports, there
are 3 BT lines connected directly to these ports.
I've just had a quick Google for you and at least one person solved
this by replacing the cable
On Wed, 19 Mar 2008, David Quinton wrote:
On Tue, 18 Mar 2008 14:50:52 + (GMT), Gordon Henderson
[EMAIL PROTECTED] wrote:
BT nearly always try to sell featureline on business lines these days.
Would sir like a 3 of 5 year feature line contract?
Fair point, Gordon.
But in their defence,
Yeah, I came accross that post too I think :) but as above, I already
tried moving the cables round, but no change.
Does anyone have a simular setup and can confirm theirs is fine?
4 Lines
1 x ADSL and Fax
3 x Voice
1 x Voice fails to answer call or dial out (no CID detected either)
2 x
On Wed, 19 Mar 2008, Paul Goodyear wrote:
Yeah, I came accross that post too I think :) but as above, I already
tried moving the cables round, but no change.
Does anyone have a simular setup and can confirm theirs is fine?
4 Lines
1 x ADSL and Fax
3 x Voice
1 x Voice fails to answer
Hi,
I have a TrixBox install with a Sangoma A200 and 4 FXO ports, there
are 3 BT lines connected directly to these ports.
One of the lines has BT FeatureLine Compact and this is the line I am
having problems with, the other 2 lines are working perfectly,
detecting CID, answering incoming calls
On Tue, 18 Mar 2008, Paul Goodyear wrote:
Hi,
I have a TrixBox install with a Sangoma A200 and 4 FXO ports, there
are 3 BT lines connected directly to these ports.
One of the lines has BT FeatureLine Compact and this is the line I am
having problems with, the other 2 lines are working
On Tue, Mar 18, 2008 at 02:06:44PM +, Paul Goodyear wrote:
Is there someother signalling I should be using to detect the incoming
calls on a BT FeatureLine? I have tried Groudstart but asterisk fails
to load chan_zap due to:
Mar 18 14:01:26 ERROR[28951] chan_zap.c: Signalling requested
Why you got
featureline on one line and not the other 2 is odd to me, but that's BT
saledroids for you
Sorry, this must be me then, I was told that FeatureLine was on the
first line, but I do need to dial 9 for the other two lines, so I
would presume that FeatureLine Compact is on all 3
Paul Goodyear wrote:
I have had a BT phone plugged into these lines for about 3 week
prior to testing on asterisk, and all the lines are fine. Even
the first line, it rings and answers ok.
Apologies if this seems dumb, but have you done the swap the cables around
test? i.e. swap the cables
Thanks, sorry for not being thougher, Yes I swapped the cables and the
fault moved to Channel 2 and Channel 3, I did this to test the Sangoma
FXS modules and they all work fine with the working fine lines. So I
believe the card,modules and cables to be good.
PaulG.
On Tue, Mar 18, 2008 at 4:55
13 matches
Mail list logo
