Here's what I came up with. Works find with the simulated DAHDI dynamic
local channels. I'll find out later in the week how it works with real
hardware.
[emergency-services]
exten =>911,1,Goto(dialpsap,1)
exten =>9911,1,Goto(dialpsap,1) ;
exten =>999,1,Goto(dialpsap,1)
exten =>112,1,Goto(dialps
On Tue, Oct 09, 2012 at 03:41:49PM -0500, Mitch Claborn wrote:
> I found that I had to chmod 666 /dev/dahdi/* to allow asterisk to
> use the simulation channels. The /dev/dahdi directory seems to be
> recreated when dahdi starts.
>
> Here is what I finally came up with that works for me.
>
> sy
I found that I had to chmod 666 /dev/dahdi/* to allow asterisk to use
the simulation channels. The /dev/dahdi directory seems to be recreated
when dahdi starts.
Here is what I finally came up with that works for me.
system.conf
dynamic=loc,1:0,4,0
fxsks=1-4
dynamic=loc,1:1,4,0
fxoks=5-8
loa
Minor correction below:
On Tue, Oct 09, 2012 at 12:32:44PM -0500, Shaun Ruffell wrote:
> On Tue, Oct 09, 2012 at 11:46:04AM -0500, Mitch Claborn wrote:
> >
> > (Now if I just didn't have to wait to get on-site where those lines
> > are to try it. Too bad there isn't a DAHDI emulator for SIP line
On Tue, Oct 09, 2012 at 11:46:04AM -0500, Mitch Claborn wrote:
>
> (Now if I just didn't have to wait to get on-site where those lines
> are to try it. Too bad there isn't a DAHDI emulator for SIP lines.)
You can use dynamic DAHDI spans to simulate this on a single box if you
would with DAHDI-Li
Excellent. I'll give it a try.
(Now if I just didn't have to wait to get on-site where those lines are
to try it. Too bad there isn't a DAHDI emulator for SIP lines.)
Mitch
On 10/09/2012 10:48 AM, Richard Mudgett wrote:
There are lots of things documented in chan_dahdi.conf.sample. The
f
> Asterisk 1.8
>
> (a) We will have a group of 4 analog lines into a Digium card that
> will
> be used for local calls. What is the best way to use those lines as
> a
> pool for outbound calls? Can I use ChanIsAvail(), listing those 4
> channels, and then use the first one returned?
There are l
Asterisk 1.8
(a) We will have a group of 4 analog lines into a Digium card that will
be used for local calls. What is the best way to use those lines as a
pool for outbound calls? Can I use ChanIsAvail(), listing those 4
channels, and then use the first one returned?
(b) For emergency call