Re: [asterisk-users] Can't make calls out of Astribank - show regdump doesn't show voltage - Getting warning due to old driver
On Tue, Jun 22, 2010 at 12:58:00AM -0400, bruce bruce wrote: Hi Guys, An 8 channel FXO? Astribank is connected to Trixbox 2.8 and I ran freepbx-module-zapauto but I get the following when running these commands and can't make calls out: [Trixbox]# dahdi_genconf xpporder /usr/sbin/dahdi_genconf: warning - OLD DRIVER: missing '/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc Which one, exactly? Trixbox originally had rather dates DAHDI drivers. I believe you should now be able to find much newer ones. At least in their repos. pbx*CLI dahdi show channels Chan Extension Context Language MOH Interpret Blocked State pseudo default default In Service 1 from-pstn default In Service 2 from-pstn default In Service 3 from-pstn default In Service 4 from-pstn default In Service 5 from-pstn default In Service 6 from-pstn default In Service 7 from-pstn default In Service 8 from-pstn default In Service pbx*CLI dahdi show status Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO Xorcom XPD #00/00: FXO OK 0 0 0 CAS Unk YEL 0 db (CSU)/0-133 feet (DSX-1) pbx*CLI dahdi show regdump 1 Unable to get registers on channel 1 Unable to get stats on channel 1 I believe that regdump uses some specific interface to the Digium card. If you want a bunch of technical information you don't really understand, look under /proc/xpp/ . I'm not going to start explaining it beyond http://docs.tzafrir.org.il/dahdi-linux/README.Astribank.html#_proc_interface [Trixbox]# dahdi_hardware -v /usr/sbin/dahdi_hardware: warning - OLD DRIVER: missing '/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc usb:002/002 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware LABEL=[usb:X1044207] connect...@usb-:00:1d.7-4 XBUS-00/XPD-00: FXO (8) Span 1 DAHDI-SYNC Note: This Astribank is deployed in United Arab Emirates and I am not sure what the line type is in terms of Ground or Loop start and wondering if that makes a difference with the Astribank and the fact that it can't how the voltage using show regdump IIRC they use LS (That is: no power denial is used at the end of a call). And I am definitly not sure what that warning of OLD DRIVER is about. Any help is appreciated. At the time we wrote it, we relied heavily on procfs. However procfs is not something that can be safely used when the module is loaded or removed. This is a fine way to get panics. Thus we gradually moved many things from /proc to /sys . Typically such a message would mean a combination of older dahdi-linux (loaded) and newer dahdi-tools. Though it's a warning, and not an error. -- Tzafrir Cohen icq#16849755 jabber:tzafrir.co...@xorcom.com +972-50-7952406 mailto:tzafrir.co...@xorcom.com http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Can't make calls out of Astribank - show regdump doesn't show voltage - Getting warning due to old driver
Thanks for the tips. This is an 8 FXO channel Astribank. My understanding is that Trixbox 2.8 already had everything dahdi related installed so there is no driver from Astribank. I followed this page and did rpm -Uvh for freepbx-module-zapauto http://www.xorcom.com/downloads/astribank2-dahdi.html What other steps do I have to take to complete the installation if you think I have not finished. Or where can I look to find the problem? As you could see from my last e-mail, everything seemed fine except for the voltage part. I am SURE that PSTN lines are connected to the box. Thanks http://www.xorcom.com/downloads/astribank2-trixbox-ce-drivers.html#trixboxce2.8 On Tue, Jun 22, 2010 at 5:25 AM, Tzafrir Cohen tzafrir.co...@xorcom.comwrote: On Tue, Jun 22, 2010 at 12:58:00AM -0400, bruce bruce wrote: Hi Guys, An 8 channel FXO? Astribank is connected to Trixbox 2.8 and I ran freepbx-module-zapauto but I get the following when running these commands and can't make calls out: [Trixbox]# dahdi_genconf xpporder /usr/sbin/dahdi_genconf: warning - OLD DRIVER: missing '/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc Which one, exactly? Trixbox originally had rather dates DAHDI drivers. I believe you should now be able to find much newer ones. At least in their repos. pbx*CLI dahdi show channels Chan Extension Context Language MOH Interpret Blocked State pseudo default default In Service 1 from-pstn default In Service 2 from-pstn default In Service 3 from-pstn default In Service 4 from-pstn default In Service 5 from-pstn default In Service 6 from-pstn default In Service 7 from-pstn default In Service 8 from-pstn default In Service pbx*CLI dahdi show status Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO Xorcom XPD #00/00: FXO OK 0 0 0 CAS Unk YEL 0 db (CSU)/0-133 feet (DSX-1) pbx*CLI dahdi show regdump 1 Unable to get registers on channel 1 Unable to get stats on channel 1 I believe that regdump uses some specific interface to the Digium card. If you want a bunch of technical information you don't really understand, look under /proc/xpp/ . I'm not going to start explaining it beyond http://docs.tzafrir.org.il/dahdi-linux/README.Astribank.html#_proc_interface [Trixbox]# dahdi_hardware -v /usr/sbin/dahdi_hardware: warning - OLD DRIVER: missing '/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc usb:002/002 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware LABEL=[usb:X1044207] connect...@usb-:00:1d.7-4 XBUS-00/XPD-00: FXO (8) Span 1 DAHDI-SYNC Note: This Astribank is deployed in United Arab Emirates and I am not sure what the line type is in terms of Ground or Loop start and wondering if that makes a difference with the Astribank and the fact that it can't how the voltage using show regdump IIRC they use LS (That is: no power denial is used at the end of a call). And I am definitly not sure what that warning of OLD DRIVER is about. Any help is appreciated. At the time we wrote it, we relied heavily on procfs. However procfs is not something that can be safely used when the module is loaded or removed. This is a fine way to get panics. Thus we gradually moved many things from /proc to /sys . Typically such a message would mean a combination of older dahdi-linux (loaded) and newer dahdi-tools. Though it's a warning, and not an error. -- Tzafrir Cohen icq#16849755 jabber:tzafrir.co...@xorcom.comjabber%3atzafrir.co...@xorcom.com +972-50-7952406 mailto:tzafrir.co...@xorcom.com http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Can't make calls out of Astribank - show regdump doesn't show voltage - Getting warning due to old driver
Hi Guys, An 8 channel Astribank is connected to Trixbox 2.8 and I ran freepbx-module-zapauto but I get the following when running these commands and can't make calls out: [Trixbox]# dahdi_genconf xpporder /usr/sbin/dahdi_genconf: warning - OLD DRIVER: missing '/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc pbx*CLI dahdi show channels Chan Extension Context Language MOH Interpret Blocked State pseudo default default In Service 1 from-pstn default In Service 2 from-pstn default In Service 3 from-pstn default In Service 4 from-pstn default In Service 5 from-pstn default In Service 6 from-pstn default In Service 7 from-pstn default In Service 8 from-pstn default In Service pbx*CLI dahdi show status Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO Xorcom XPD #00/00: FXO OK 0 0 0 CAS Unk YEL 0 db (CSU)/0-133 feet (DSX-1) pbx*CLI dahdi show regdump 1 Unable to get registers on channel 1 Unable to get stats on channel 1 [Trixbox]# dahdi_hardware -v /usr/sbin/dahdi_hardware: warning - OLD DRIVER: missing '/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc usb:002/002 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware LABEL=[usb:X1044207] connect...@usb-:00:1d.7-4 XBUS-00/XPD-00: FXO (8) Span 1 DAHDI-SYNC Note: This Astribank is deployed in United Arab Emirates and I am not sure what the line type is in terms of Ground or Loop start and wondering if that makes a difference with the Astribank and the fact that it can't how the voltage using show regdump And I am definitly not sure what that warning of OLD DRIVER is about. Any help is appreciated. Thanks, -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
