snip
Thanks for the reply. I am not getting any output from the Asterisk CLI when I
place the call. The phone give busy signal as soon as I push the first digit
of the extension #. When I call the 7961 from another extension I get the
following on the CLI - that works fine.
/snip
If the
Thanks for the reply. I am not getting any output from the Asterisk CLI
when I place the call. The phone give busy signal as soon as I push the
first digit of the extension #. When I call the 7961 from another
extension I get the following on the CLI - that works fine.
On Sun, 22 Nov
Hello,
I have been working on getting a Cisco 7961G to place calls on my * server for
a while now with no luck. I can receive calls just fine but I get a fast busy
when I try to place calls. I have googled and been to many different sites but
the solution has not been found. Anyone out
There could be many reasons for this. You should show us the output of
your asterisk cli during a failed call attempt, and we can go from
there.
Thanks,
--Warren Selby
On Nov 20, 2009, at 5:23 PM, Brad Darr bd...@juniper.net wrote:
Hello,
I have been working on getting a Cisco 7961G
-users-boun...@lists.digium.com] On Behalf Of Warren Selby
Sent: Friday, November 20, 2009 5:43 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Cisco 7961 - can't place calls
There could be many reasons for this. You should show us the output of
your
Thanks for the reply. I am not getting any output from the Asterisk CLI when
I place the call. The phone give busy signal as soon as I push the first
digit of the extension #.
Sounds like the same problems I am having with the 7971G (see my
message on this list couple days ago). In my case
