Re: [asterisk-users] Echo Cancel Cards
Joseph wrote: On Mon, 2006-10-09 at 20:41 -0400, Forrest Beck wrote: Anyone using the echo cancelation cards from digium? We are using the single span T1 card with out echo cancel and I was curious if it was worth the money. I'm running Asterisk 1.0.11 with few Sipura 3000/2000 units and have no echo whatsoever. I just tried new Asterisk 1.2.12.1 and the first thing I've noticed was terrible echo, not to mentioned that it keep crashing constantly to a point this that is not possible to use it. I've got an SPA-3000 at home that is constantly crashing, echoey and is almost unusable. (The CS4660-based ATA and PA1688-based handsets have otherwise been fine, as were the the Cisco 468 and Linysys PAP2 when they were in use). ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Echo Cancel Cards
I have never used T1 cards but as far as POTS line cards I would say that I like sangoma better. It is a little bit harder to set up but works wonders. - Original Message - From: Thomas Kenyon [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Tuesday, October 10, 2006 12:31 PM Subject: Re: [asterisk-users] Echo Cancel Cards Joseph wrote: On Mon, 2006-10-09 at 20:41 -0400, Forrest Beck wrote: Anyone using the echo cancelation cards from digium? We are using the single span T1 card with out echo cancel and I was curious if it was worth the money. I'm running Asterisk 1.0.11 with few Sipura 3000/2000 units and have no echo whatsoever. I just tried new Asterisk 1.2.12.1 and the first thing I've noticed was terrible echo, not to mentioned that it keep crashing constantly to a point this that is not possible to use it. I've got an SPA-3000 at home that is constantly crashing, echoey and is almost unusable. (The CS4660-based ATA and PA1688-based handsets have otherwise been fine, as were the the Cisco 468 and Linysys PAP2 when they were in use). ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Echo Cancel Cards
The Sangoma single port T1 card also works well, and , along with the 5 year warranty, works with just about any MB that it will fit, makes it a no brainer choice over the Digium products. Sangoma just doesn't say try another motherboard. If their product doesn't work, they find out why and fix it! John Novack Dovid B wrote: I have never used T1 cards but as far as POTS line cards I would say that I like sangoma better. It is a little bit harder to set up but works wonders. - Original Message - From: Thomas Kenyon [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Tuesday, October 10, 2006 12:31 PM Subject: Re: [asterisk-users] Echo Cancel Cards Joseph wrote: On Mon, 2006-10-09 at 20:41 -0400, Forrest Beck wrote: Anyone using the echo cancelation cards from digium? We are using the single span T1 card with out echo cancel and I was curious if it was worth the money. I'm running Asterisk 1.0.11 with few Sipura 3000/2000 units and have no echo whatsoever. I just tried new Asterisk 1.2.12.1 and the first thing I've noticed was terrible echo, not to mentioned that it keep crashing constantly to a point this that is not possible to use it. I've got an SPA-3000 at home that is constantly crashing, echoey and is almost unusable. (The CS4660-based ATA and PA1688-based handsets have otherwise been fine, as were the the Cisco 468 and Linysys PAP2 when they were in use). ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Echo Cancel Cards
I´m about to acquire an E1 interface. I was reading about TE110P and hardware incompatibilities issues with some boards, servers and chipsets. I also read a lot of compliments about Sangoma Hardware (specially for E1/T1 interfaces) and I was wondering if A101 from Sagoma is a better choice (technically speaking) than Digium TE110P. I read now, on this post, an opinion about Sangoma interfaces and echo cancellation issues.. I have a PC with Asus P5LD2 board (Intel 945P chipset). I asked Digium support for how compatible is the TE110P with my box.. and they said that no incompatibility issues had been reported with the chipset I use.. BUT, they had no test TE110P with this chipset... I´m not a Sangoma or Digium fan... I´m just a newbie who don´t want to get the wrong piece of hardware. I really appreciate any advice from people with a lot of experience and skills on this topic. Thanks in advance R.R. Libera Dovid B escribió: I have never used T1 cards but as far as POTS line cards I would say that I like sangoma better. It is a little bit harder to set up but works wonders. - Original Message - From: Thomas Kenyon [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Tuesday, October 10, 2006 12:31 PM Subject: Re: [asterisk-users] Echo Cancel Cards Joseph wrote: On Mon, 2006-10-09 at 20:41 -0400, Forrest Beck wrote: Anyone using the echo cancelation cards from digium? We are using the single span T1 card with out echo cancel and I was curious if it was worth the money. I'm running Asterisk 1.0.11 with few Sipura 3000/2000 units and have no echo whatsoever. I just tried new Asterisk 1.2.12.1 and the first thing I've noticed was terrible echo, not to mentioned that it keep crashing constantly to a point this that is not possible to use it. I've got an SPA-3000 at home that is constantly crashing, echoey and is almost unusable. (The CS4660-based ATA and PA1688-based handsets have otherwise been fine, as were the the Cisco 468 and Linysys PAP2 when they were in use). ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Echo Cancel Cards
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I'm quite happy with sangoma cards, no issues so far, plus their installation/setup software makes it a breeze to get everything working. R.R. Libera wrote: I´m about to acquire an E1 interface. I was reading about TE110P and hardware incompatibilities issues with some boards, servers and chipsets. I also read a lot of compliments about Sangoma Hardware (specially for E1/T1 interfaces) and I was wondering if A101 from Sagoma is a better choice (technically speaking) than Digium TE110P. I read now, on this post, an opinion about Sangoma interfaces and echo cancellation issues.. I have a PC with Asus P5LD2 board (Intel 945P chipset). I asked Digium support for how compatible is the TE110P with my box.. and they said that no incompatibility issues had been reported with the chipset I use.. BUT, they had no test TE110P with this chipset... I´m not a Sangoma or Digium fan... I´m just a newbie who don´t want to get the wrong piece of hardware. I really appreciate any advice from people with a lot of experience and skills on this topic. Thanks in advance R.R. Libera -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFK6YM2QVs8jsa1mQRAklcAJ9sEpXIumEug6zulq+v6q72pgee9ACfU7t/ utDsPjAfJXNWCW07Q0Q8q5U= =Rmc0 -END PGP SIGNATURE- ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Echo Cancel Cards
I am using the TE110P with the Intel 945P chipset, and I don't have any issues with compatibility. The 945P chipset is a very common chipset for the D and 4 processor. Works quite well. On 10/10/06, R.R. Libera [EMAIL PROTECTED] wrote: I´m about to acquire an E1 interface. I was reading about TE110P and hardware incompatibilities issues with some boards, servers and chipsets. I also read a lot of compliments about Sangoma Hardware (specially for E1/T1 interfaces) and I was wondering if A101 from Sagoma is a better choice (technically speaking) than Digium TE110P. I read now, on this post, an opinion about Sangoma interfaces and echo cancellation issues.. I have a PC with Asus P5LD2 board (Intel 945P chipset). I asked Digium support for how compatible is the TE110P with my box.. and they said that no incompatibility issues had been reported with the chipset I use.. BUT, they had no test TE110P with this chipset... I´m not a Sangoma or Digium fan... I´m just a newbie who don´t want to get the wrong piece of hardware. I really appreciate any advice from people with a lot of experience and skills on this topic. Thanks in advance R.R. Libera Dovid B escribió: I have never used T1 cards but as far as POTS line cards I would say that I like sangoma better. It is a little bit harder to set up but works wonders. - Original Message - From: Thomas Kenyon [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Tuesday, October 10, 2006 12:31 PM Subject: Re: [asterisk-users] Echo Cancel Cards Joseph wrote: On Mon, 2006-10-09 at 20:41 -0400, Forrest Beck wrote: Anyone using the echo cancelation cards from digium? We are using the single span T1 card with out echo cancel and I was curious if it was worth the money. I'm running Asterisk 1.0.11 with few Sipura 3000/2000 units and have no echo whatsoever. I just tried new Asterisk 1.2.12.1 and the first thing I've noticed was terrible echo, not to mentioned that it keep crashing constantly to a point this that is not possible to use it. I've got an SPA-3000 at home that is constantly crashing, echoey and is almost unusable. (The CS4660-based ATA and PA1688-based handsets have otherwise been fine, as were the the Cisco 468 and Linysys PAP2 when they were in use). ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Echo Cancel Cards
R.R. Libera wrote: I´m about to acquire an E1 interface. I was reading about TE110P and hardware incompatibilities issues with some boards, servers and chipsets. I also read a lot of compliments about Sangoma Hardware (specially for E1/T1 interfaces) and I was wondering if A101 from Sagoma is a better choice (technically speaking) than Digium TE110P. I read now, on this post, an opinion about Sangoma interfaces and echo cancellation issues.. I've just put the A102 from Sangoma into a system here - their install routine did almost everything for me. Just some minor Asterisk configuration needed before I could plug it into our legacy PBX and have the two talking like friends! [EMAIL PROTECTED] :o) ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Echo Cancel Cards
I second that. I had card from Sangoma with echo can. When ever the echo can. was enabled ZAP/2 would work with one way audio. Sangoma had a tech ssh into my box for a few hours ar no charge. It was the first time they saw such a problem with the card the supplier sent me a new one the next day. - Original Message - From: John Novack [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Tuesday, October 10, 2006 3:38 PM Subject: Re: [asterisk-users] Echo Cancel Cards The Sangoma single port T1 card also works well, and , along with the 5 year warranty, works with just about any MB that it will fit, makes it a no brainer choice over the Digium products. Sangoma just doesn't say try another motherboard. If their product doesn't work, they find out why and fix it! John Novack Dovid B wrote: I have never used T1 cards but as far as POTS line cards I would say that I like sangoma better. It is a little bit harder to set up but works wonders. - Original Message - From: Thomas Kenyon [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Tuesday, October 10, 2006 12:31 PM Subject: Re: [asterisk-users] Echo Cancel Cards Joseph wrote: On Mon, 2006-10-09 at 20:41 -0400, Forrest Beck wrote: Anyone using the echo cancelation cards from digium? We are using the single span T1 card with out echo cancel and I was curious if it was worth the money. I'm running Asterisk 1.0.11 with few Sipura 3000/2000 units and have no echo whatsoever. I just tried new Asterisk 1.2.12.1 and the first thing I've noticed was terrible echo, not to mentioned that it keep crashing constantly to a point this that is not possible to use it. I've got an SPA-3000 at home that is constantly crashing, echoey and is almost unusable. (The CS4660-based ATA and PA1688-based handsets have otherwise been fine, as were the the Cisco 468 and Linysys PAP2 when they were in use). ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Echo Cancel Cards
Anyone using the echo cancelation cards from digium? We are using the single span T1 card with out echo cancel and I was curious if it was worth the money. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Echo Cancel Cards
On Mon, 2006-10-09 at 20:41 -0400, Forrest Beck wrote: Anyone using the echo cancelation cards from digium? We are using the single span T1 card with out echo cancel and I was curious if it was worth the money. I'm running Asterisk 1.0.11 with few Sipura 3000/2000 units and have no echo whatsoever. I just tried new Asterisk 1.2.12.1 and the first thing I've noticed was terrible echo, not to mentioned that it keep crashing constantly to a point this that is not possible to use it. My question: did they artificially introduced echo to sell more hardware? -- #Joseph ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Echo Cancel Cards
On 10/10/06, Joseph [EMAIL PROTECTED] wrote: On Mon, 2006-10-09 at 20:41 -0400, Forrest Beck wrote: Anyone using the echo cancelation cards from digium?We are using the single span T1 card with outecho cancel and I was curious if it was worth the money. I'm running Asterisk 1.0.11 with few Sipura 3000/2000 units and have noecho whatsoever.I just tried new Asterisk 1.2.12.1 and the first thing I've noticed wasterrible echo, not to mentioned that it keep crashing constantly to a point this that is not possible to use it.My question: did they artificially introduced echo to sell morehardware?They are the open source community who contribute code and the code is open for you to inspect and diff from the previous version - if you're not able to do that you shouldn't inflame conspiracy theories without being able to produce evidence. Rob ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
