The IP Phones that I am using is the Digium D40, but did not find any place to
enable the RPID, I do not know if they are enabled by default.
Any advise?
Regards
Bilal
--
Hi,
You need to set rpid on the calling phone settings, if that
phone knows
what to
On 8/9/2012 6:32 AM, bilal ghayyad wrote:
The IP Phones that I am using is the Digium D40, but did not find any place to
enable the RPID, I do not know if they are enabled by default.
Any advise?
Regards
Bilal
Remove the allowrpid=yes as this in incorrect.
In sip.conf for the extensions in
Hi All;
Asterisk 1.8.11-cert1
I need to do the following, how?
If my extension is 500 and I need to call the extension 501, so when dialing
501, then I need to be able to see the name of the 501 (for example, the name
was: Mike, so I need to see at my IP Phone that I am calling Mike which is
Hi,
You need to set rpid on the calling phone settings, if that phone knows
what to do with RPID. Then you need to set allowrpid=yes in the sip peer
settings of A party and B party. I did that on CISCO 79X0 phones and it
worked perfectly,
Regards,
Sammy
On Tue, Aug 7, 2012 at 3:43 AM, bilal
www.voip-info.org/wiki/view/Asterisk+multi-language
--
Best regards,
Rudi
-Original Message-
From: bilal ghayyad bilmar...@yahoo.com
Sender: asterisk-users-boun...@lists.digium.com
Date: Mon, 6 Aug 2012 15:43:24
To: asterisk-users@lists.digium.com
Reply-To: Asterisk Users Mailing List -
It's look like I'm wrong, didn't read your reply first, don't know there's such
feature, very nice info :D
--
Best regards,
Rudi
-Original Message-
From: SamyGo govoi...@gmail.com
Sender: asterisk-users-boun...@lists.digium.com
Date: Tue, 7 Aug 2012 09:24:19
To: Asterisk Users Mailing
