Hi all,
the problem has been solved setting pridialplan=unknown.
Asterisk restart is mandatoryreloading chan_dahdi.conf module is not
enough!
The leading zero still remains a ghost since it cannot be seen in any
log. B! Creepy! :)
Hope this can help some other soul in pain...
Un-top-posting,
On Tue, Nov 20, 2012 at 03:49:49PM +0100, Leandro Dardini wrote:
2012/11/20 Frederic Van Espen frederic...@gmail.com
On Tue, 2012-11-20 at 15:03 +0100, gincantalupo wrote:
I'm sure nobody has added something... tried prilocaldialplan and
pridialplan but nothing
*Subject:* Re: [asterisk-users] leading ghost 0
Not only, you have to restart dahdi/zaptel as well.
Leandro
2012/11/20 Frederic Van Espen frederic...@gmail.com
mailto:frederic...@gmail.com
On Tue, 2012-11-20 at 15:03 +0100, gincantalupo wrote:
I'm sure nobody has added something... tried
Then if you did not restart dahdi and asterisk, then the changes to the
parameters in chan_dahdi.conf and system.conf were never taken into
account. There is no other way than really restarting asterisk and
dahdi.
Frederic
On Wed, 2012-11-21 at 09:08 +0100, gincantalupo wrote:
I cannot restart
I am not really sure, restarting asterisk and dahdi can be the most obvious
thing to do, but restarting the dahdi kernel module can be useless if you
haven't changed the kernel module configuration and reloading the module in
asterisk can be enough if you have changed just the chan_dahdi.conf
Alex,
I had already tried itreloading chan_dahdi.so module is enough...I
saw Asterisk was behaving differently after reload. To tell the truth,
setting pridialplan=unknown causes Asterisk to stop reading following
channels configuration...it says pridialplan is already unknown so it
Any changes inside chan_dahdi requires you to unload module chan_dahdi and
load module chan_dahdi, in case you dont wish to.restart asterisk.
pridialplan = national or unknown should help you solve the problem,
however you need to unload n load dahdi module.
Mitul
On Nov 21, 2012 10:26 PM,
On 11/21/2012 10:53 AM, gincantalupo wrote:
Alex,
I had already tried itreloading chan_dahdi.so module is enough...I
saw Asterisk was behaving differently after reload. To tell the truth,
setting pridialplan=unknown causes Asterisk to stop reading following
channels configuration...it says
Hi all,
I have problems dialling out because my new telco (the previous gave no
problems) tells me my PBX adds a leading 0 and that's why I cannot dial
out (but I can receive calls).
I make a small extensions.conf as a test:
exten = 666,1,Dial(DAHDI/g1/339xx)
but cannot dial out
2012/11/20 gincantalupo gincantal...@fgasoftware.com
Hi all,
I have problems dialling out because my new telco (the previous gave no
problems) tells me my PBX adds a leading 0 and that's why I cannot dial out
(but I can receive calls).
I make a small extensions.conf as a test:
exten =
Hi Leandro,
thanks for your answer.
I already have tried those parameters but without any positive result.
The telco technician has tried the line with its machine and it
worked...remote telco technicians say they get a leading zero...
I'm thinking there is something strange in the middle
That is a real mistery! I like a lots these cases when all seems not
working despite all being correctly configured, but you know first or later
you'll find the answer.
From your website, it seems you are selling/renting PBX based on asterisk,
so you can be sure nobody has messed with the
Hi Leandro,
I'm sure nobody has added something... tried prilocaldialplan and
pridialplan but nothing changed.
Question: if pridialplan or prilocaldialplan would work, should I see
the 0 inside PRI frame with intense debug or it is hidden?
Yes...the technician did it...there is only one
On Tue, 2012-11-20 at 15:03 +0100, gincantalupo wrote:
I'm sure nobody has added something... tried prilocaldialplan and
pridialplan but nothing changed.
Question: if pridialplan or prilocaldialplan would work, should I see
the 0 inside PRI frame with intense debug or it is hidden?
Somebody
Not only, you have to restart dahdi/zaptel as well.
Leandro
2012/11/20 Frederic Van Espen frederic...@gmail.com
On Tue, 2012-11-20 at 15:03 +0100, gincantalupo wrote:
I'm sure nobody has added something... tried prilocaldialplan and
pridialplan but nothing changed.
Question: if
Dardini
Sent: Tuesday, November 20, 2012 8:50 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] leading ghost 0
Not only, you have to restart dahdi/zaptel as well.
Leandro
2012/11/20 Frederic Van Espen frederic...@gmail.com
On Tue, 2012-11-20
On 11/20/2012 8:03 AM, gincantalupo wrote:
Hi Leandro,
I'm sure nobody has added something... tried prilocaldialplan and
pridialplan but nothing changed.
Question: if pridialplan or prilocaldialplan would work, should I see
the 0 inside PRI frame with intense debug or it is hidden?
Yes...the
17 matches
Mail list logo