, October 05, 2009 10:05 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] tdm outgoing
B.Masoud @ SH schrieb:
I have defined the card g0 to have 24 channels, but
every time I try to call, if all ports are off the call always go to the
first port, how can I
On Wed, Oct 07, 2009 at 01:24:01PM +0300, B.Masoud @ SH wrote:
Thanks,
What if I want to group a TDM2400 into 3 groups, r0/0 to r0/7 , r1/8 to
r1/15 , r2/16 to r2/23
How to do that?
DAHDI channel numbers are 1-based and not 0-based. HEnce you should
probably use 1-8, 9-16 and 17-24
group =
...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Paul Hales
Sent: Monday, October 05, 2009 2:38 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] tdm outgoing
Is inbound working?
Can you see action on the CLI when you
Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] tdm outgoing
At 04:32 PM 10/4/2009, you wrote:
Hi
I installed TDM24 card, made ZAP (DAHDI) trunk, and set outbound all calls
to that trunk, I am getting all circuits are busy now, do I have to do
something specific?? I am using
DAHDI/DGTDM24/966505103250
This (DGTDM24) is strange. Could you provide the setup of the DAHDI trunk?
You should have something like DAHDI/g0/96 or DAHDI/10/96
Here are more info on this subject:
http://www.mail-archive.com/asterisk-users@lists.digium.com/msg226642.html
HTH,
Ioan
Zapata.cfg
Thanks again!
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Ioan Indreias
Sent: Monday, October 05, 2009 1:18 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users
I cant find Zapata.cfg
You have a DAHDI installation thus you have to find chan_dahdi.conf.
it should be located under /etc/asterisk
Regarding the configuration for tones you have to check indications.conf file
Best regards,
Nini
___
-- Bandwidth
At 02:47 AM 10/5/2009, you wrote:
TDM04. The original 4 channel card with 4 red cards installed.
Are you series???
My card is FXO TDM2400, I am sure its designed to forward calls to pstn!!!
At 04:32 PM 10/4/2009, you wrote:
Hi
I installed TDM24 card, made ZAP (DAHDI) trunk, and set outbound
-users] tdm outgoing
I cant find Zapata.cfg
You have a DAHDI installation thus you have to find chan_dahdi.conf.
it should be located under /etc/asterisk
Regarding the configuration for tones you have to check indications.conf
file
Best regards,
Nini
B.Masoud @ SH schrieb:
I have defined the card g0 to have 24 channels, but
every time I try to call, if all ports are off the call always go to the
first port, how can I balance the calls over all ports???
http://www.voip-info.org/wiki/view/Asterisk+ZAP+channels#DialingaGroup
Hi
I installed TDM24 card, made ZAP (DAHDI) trunk, and set outbound all calls
to that trunk, I am getting all circuits are busy now, do I have to do
something specific?? I am using elastix.
Thanks.
___
-- Bandwidth and Colocation Provided by
Is inbound working?
Can you see action on the CLI when you send a call to the lines attached
to the card?
PaulH
B.Masoud @ SH wrote:
Hi
I installed TDM24 card, made ZAP (DAHDI) trunk, and set outbound all calls
to that trunk, I am getting all circuits are busy now, do I have to do
At 04:32 PM 10/4/2009, you wrote:
Hi
I installed TDM24 card, made ZAP (DAHDI) trunk, and set outbound all calls
to that trunk, I am getting all circuits are busy now, do I have to do
something specific?? I am using elastix.
Sometimes you can't make a call on DAHDI until a call has been
On Mon, Oct 05, 2009 at 10:37:52AM +1100, Paul Hales wrote:
Is inbound working?
Considering he has no channel of type 'ZAP' and he uses Zaptel: no.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406
14 matches
Mail list logo
