[asterisk-users] vzaphfc installation?
Hi everybody has anybody succeded in vzaphfc installation? I need more info about it. Thank you Regards Mauro ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] vzaphfc installation...
Hi everybody, does anybody knows how to install and configure VZAPHFC? Thank you Best regards Mauro ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] vzaphfc installation...
On Tue, Mar 27, 2007 at 11:20:49AM +0200, Mauro Zanin wrote: Hi everybody, does anybody knows how to install and configure VZAPHFC? Basically something of the sort of: Copy the sources of vzaphfc as a subdirectory vzaphfc under the sources of zaptel . Add to Makefile.linux26 the line: obj-m += vzaphfc/ (or get the zaptel/zaptel-source packages from Debian) -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] vzaphfc?
On Wed, Jan 03, 2007 at 07:16:06AM +0100, Remco Barendse wrote: On Wed, 3 Jan 2007, Tzafrir Cohen wrote: P[ 0] -- mISDN Channel Driver Registred -- (BE AWARE THIS DRIVER IS EXPERIMENTAL!) ..Jan 2 23:07:23 ERROR[25747]: chan_zap.c:10603 setup_zap: Unknown signalling method 'bri_cpe_ptmp' our Asterisk is not bristuffed. And you don't expect to use ZapBRI, anyway. BTW: with 1.4 and latest 1.2, bristuffed zaptel could basicaly work with the signalling type pri_cpe/pri_net, though this is not well-tested and may not perform as well as bristuffed asterisk/libpri. Jan 2 23:07:23 ERROR[25747]: chan_zap.c:10228 setup_zap: Signalling must be specified before any channels are. Jan 2 23:07:23 WARNING[25747]: loader.c:414 __load_resource: chan_zap.so: load_module failed, returning -1 Jan 2 23:07:23 WARNING[25747]: loader.c:554 load_modules: Loading module chan_zap.so failed! You have zaptel channels configured in your zapata.conf . So I should leave both zaptel.conf and zapata.conf completely empty? /etc/zaptel.conf is used to configure the kernel modules. It is used by ztcfg. /etc/asterisk/zapata.conf is used by Asterisk's chan_zap . Asterisk will try to use any channel listed there. If no channel is listed there, Asterisk will not attempt to use any. (except possibly the pseudo channel for zaptel timing, if you happen to have any zaptel device that provides timing, or ztdummy) -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] vzaphfc?
On Fri, 29 Dec 2006, Julian J. M. wrote: It's not necessary to recompile the kernel for mISDN support. Check http://www.laimbock.com/asterisk/ Grab the mISDN source rpm, and build it. $ wget http://www.xs4all.nl/~pjl/downloads/asterisk/srpms/mISDN-cvs20061107-2_fc6.lc.src.rpm $ rpmbuild --rebuild mISDN-cvs20061107-2_fc6.lc.src.rpm then check /usr/src/redhat/RPMS/i386/ You should have the kernel modules and userspace applications. Once installed, I could enable chan_misdn in asterisk 1.4 without issue, and it's working great in NT mode with ISDN phones. I haven't tested asterisk 1.2, but there is no it shouldn't work as well. I deleted all the bristuff modules i could find plus the old asterisk libs, compiled zaptel, libpri and asterisk from scratch but can't get it to work. First I get errors about something I guess is missing from misdn, later errors about zaptel. I'll just toss the HFC-S card and convert the ISDN line to analog. These are the errors : .mISDN_close: fid(14) isize(131072) inbuf(0x2a96ee6010) irp(0x2a96ee6010) iend(0x2a96ee6010) Jan 2 23:07:23 WARNING[25747]: misdn_config.c:642 _build_port_config: misdn.conf: ports=(null) (section: intern) invalid or out of range. Please edit your misdn.conf and then do a misdn reload. Jan 2 23:07:23 WARNING[25747]: misdn_config.c:642 _build_port_config: misdn.conf: ports=(null) (section: first_extern) invalid or out of range. Please edit your misdn.conf and then do a misdn reload. Jan 2 23:07:23 WARNING[25747]: misdn_config.c:642 _build_port_config: misdn.conf: ports=(null) (section: second_extern) invalid or out of range. Please edit your misdn.conf and then do a misdn reload. P[ 0] Got: 1 from get_ports P[ 0] -- mISDN Channel Driver Registred -- (BE AWARE THIS DRIVER IS EXPERIMENTAL!) ..Jan 2 23:07:23 ERROR[25747]: chan_zap.c:10603 setup_zap: Unknown signalling method 'bri_cpe_ptmp' Jan 2 23:07:23 ERROR[25747]: chan_zap.c:10228 setup_zap: Signalling must be specified before any channels are. Jan 2 23:07:23 WARNING[25747]: loader.c:414 __load_resource: chan_zap.so: load_module failed, returning -1 Jan 2 23:07:23 WARNING[25747]: loader.c:554 load_modules: Loading module chan_zap.so failed! Cheers! ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] vzaphfc?
Remove from zapata.conf the lines re bristuff (bri_cpe_ptmp, etc).
Setup misdn:
/etc/init.d/misdn-init config
vi /etc/misdn-init.conf(check it's ok, NT or TE, PTP or PTMP...)
/etc/init.d/misdn-init start
chkconfig --add misdn-init
Setup chan_misdn, in /etc/asterisk/misdn.conf. At the end:
[telco]
port=1
context=from-pstn
msns=*
Then, in extensions.conf:
exten = _,1,Set(CALLERID(num)=00)
exten = _.,2,Dial(misdn/g:telco/${EXTEN})
Julian J. M.
On 1/2/07, Remco Barendse [EMAIL PROTECTED] wrote:
On Fri, 29 Dec 2006, Julian J. M. wrote:
It's not necessary to recompile the kernel for mISDN support. Check
http://www.laimbock.com/asterisk/
Grab the mISDN source rpm, and build it.
$ wget
http://www.xs4all.nl/~pjl/downloads/asterisk/srpms/mISDN-cvs20061107-2_fc6.lc.src.rpm
$ rpmbuild --rebuild mISDN-cvs20061107-2_fc6.lc.src.rpm
then check /usr/src/redhat/RPMS/i386/
You should have the kernel modules and userspace applications. Once
installed, I could enable chan_misdn in asterisk 1.4 without issue,
and it's working great in NT mode with ISDN phones. I haven't tested
asterisk 1.2, but there is no it shouldn't work as well.
I deleted all the bristuff modules i could find plus the old asterisk
libs, compiled zaptel, libpri and asterisk from scratch but can't get it
to work.
First I get errors about something I guess is missing from misdn, later
errors about zaptel.
I'll just toss the HFC-S card and convert the ISDN line to analog.
These are the errors :
.mISDN_close: fid(14) isize(131072) inbuf(0x2a96ee6010) irp(0x2a96ee6010)
iend(0x2a96ee6010)
Jan 2 23:07:23 WARNING[25747]: misdn_config.c:642 _build_port_config:
misdn.conf: ports=(null) (section: intern) invalid or out of range.
Please edit your misdn.conf and then do a misdn reload.
Jan 2 23:07:23 WARNING[25747]: misdn_config.c:642 _build_port_config:
misdn.conf: ports=(null) (section: first_extern) invalid or out of
range. Please edit your misdn.conf and then do a misdn reload.
Jan 2 23:07:23 WARNING[25747]: misdn_config.c:642 _build_port_config:
misdn.conf: ports=(null) (section: second_extern) invalid or out of
range. Please edit your misdn.conf and then do a misdn reload.
P[ 0] Got: 1 from get_ports
P[ 0] -- mISDN Channel Driver Registred -- (BE AWARE THIS DRIVER IS
EXPERIMENTAL!)
..Jan 2 23:07:23 ERROR[25747]: chan_zap.c:10603 setup_zap: Unknown
signalling method 'bri_cpe_ptmp'
Jan 2 23:07:23 ERROR[25747]: chan_zap.c:10228 setup_zap: Signalling must
be specified before any channels are.
Jan 2 23:07:23 WARNING[25747]: loader.c:414 __load_resource: chan_zap.so:
load_module failed, returning -1
Jan 2 23:07:23 WARNING[25747]: loader.c:554 load_modules: Loading module
chan_zap.so failed!
Cheers!
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] vzaphfc?
On Tue, Jan 02, 2007 at 11:10:56PM +0100, Remco Barendse wrote: On Fri, 29 Dec 2006, Julian J. M. wrote: It's not necessary to recompile the kernel for mISDN support. Check http://www.laimbock.com/asterisk/ Grab the mISDN source rpm, and build it. $ wget http://www.xs4all.nl/~pjl/downloads/asterisk/srpms/mISDN-cvs20061107-2_fc6.lc.src.rpm $ rpmbuild --rebuild mISDN-cvs20061107-2_fc6.lc.src.rpm then check /usr/src/redhat/RPMS/i386/ You should have the kernel modules and userspace applications. Once installed, I could enable chan_misdn in asterisk 1.4 without issue, and it's working great in NT mode with ISDN phones. I haven't tested asterisk 1.2, but there is no it shouldn't work as well. I deleted all the bristuff modules i could find plus the old asterisk libs, compiled zaptel, libpri and asterisk from scratch but can't get it to work. First I get errors about something I guess is missing from misdn, later errors about zaptel. I'll just toss the HFC-S card and convert the ISDN line to analog. These are the errors : .mISDN_close: fid(14) isize(131072) inbuf(0x2a96ee6010) irp(0x2a96ee6010) iend(0x2a96ee6010) Jan 2 23:07:23 WARNING[25747]: misdn_config.c:642 _build_port_config: misdn.conf: ports=(null) (section: intern) invalid or out of range. Please edit your misdn.conf and then do a misdn reload. Jan 2 23:07:23 WARNING[25747]: misdn_config.c:642 _build_port_config: misdn.conf: ports=(null) (section: first_extern) invalid or out of range. Please edit your misdn.conf and then do a misdn reload. Jan 2 23:07:23 WARNING[25747]: misdn_config.c:642 _build_port_config: misdn.conf: ports=(null) (section: second_extern) invalid or out of range. Please edit your misdn.conf and then do a misdn reload. P[ 0] Got: 1 from get_ports P[ 0] -- mISDN Channel Driver Registred -- (BE AWARE THIS DRIVER IS EXPERIMENTAL!) ..Jan 2 23:07:23 ERROR[25747]: chan_zap.c:10603 setup_zap: Unknown signalling method 'bri_cpe_ptmp' our Asterisk is not bristuffed. And you don't expect to use ZapBRI, anyway. BTW: with 1.4 and latest 1.2, bristuffed zaptel could basicaly work with the signalling type pri_cpe/pri_net, though this is not well-tested and may not perform as well as bristuffed asterisk/libpri. Jan 2 23:07:23 ERROR[25747]: chan_zap.c:10228 setup_zap: Signalling must be specified before any channels are. Jan 2 23:07:23 WARNING[25747]: loader.c:414 __load_resource: chan_zap.so: load_module failed, returning -1 Jan 2 23:07:23 WARNING[25747]: loader.c:554 load_modules: Loading module chan_zap.so failed! You have zaptel channels configured in your zapata.conf . BTW: I guess that this is 1.2 and not 1.4, because 1.4 should not fail just becasue chan_zap.so has failed to set up some channels. -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] vzaphfc?
On Wed, 3 Jan 2007, Tzafrir Cohen wrote: P[ 0] -- mISDN Channel Driver Registred -- (BE AWARE THIS DRIVER IS EXPERIMENTAL!) ..Jan 2 23:07:23 ERROR[25747]: chan_zap.c:10603 setup_zap: Unknown signalling method 'bri_cpe_ptmp' our Asterisk is not bristuffed. And you don't expect to use ZapBRI, anyway. BTW: with 1.4 and latest 1.2, bristuffed zaptel could basicaly work with the signalling type pri_cpe/pri_net, though this is not well-tested and may not perform as well as bristuffed asterisk/libpri. Jan 2 23:07:23 ERROR[25747]: chan_zap.c:10228 setup_zap: Signalling must be specified before any channels are. Jan 2 23:07:23 WARNING[25747]: loader.c:414 __load_resource: chan_zap.so: load_module failed, returning -1 Jan 2 23:07:23 WARNING[25747]: loader.c:554 load_modules: Loading module chan_zap.so failed! You have zaptel channels configured in your zapata.conf . So I should leave both zaptel.conf and zapata.conf completely empty? BTW: I guess that this is 1.2 and not 1.4, because 1.4 should not fail just becasue chan_zap.so has failed to set up some channels. This is Asterisk 1.2 indeed, i need the chan-sccp driver from Sergio Chersovani because it supports multiple phone registrations from 1 ip address and AFAIK that channel doesn't work on 1.4 yet. Is there a lot of difference in misdn support between 1.2 - 1.4? I tried googling for example configs with misdn but couldn't find any. Thanks! ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] vzaphfc?
On Thu, 28 Dec 2006, Gavin Hamill wrote: On Thursday 28 December 2006 23:27, Tzafrir Cohen wrote: vzaphfc is not a complete replacement of bristuff. It replies on most of it. Rather, it replaces the zaphfc subdirectory with an improved ZapBRI driver for HFC-s-based PCI cards. Further, if you're looking for 'something else' re: cheapo ISDN cards, definately give Asterisk 1.4 and mISDN a look - no BRIStuff, no huge patches, no wacky stuff.. all Asterisk-core support that worked really well in the brief time I tested it. The key difference is rather than generating 8000 interrupts per second, the mISDN kernel driver (which itself can be thought of 'isdn4linux' version 2.0) mISDN is just one part of isdn4linux. don't forget the all other isdn drivers under linux and the core. If you talk about some 2.0 version, then you should say it is HiSax 2.0, because mISDN is the driver for the passive isdn cards like HiSax. Armin polls the card, leading to much lower system load, and no 'wanted 8 bytes, read 7!' errors from dmesg. Cheers, Gavin. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] vzaphfc?
It's not necessary to recompile the kernel for mISDN support. Check http://www.laimbock.com/asterisk/ Grab the mISDN source rpm, and build it. $ wget http://www.xs4all.nl/~pjl/downloads/asterisk/srpms/mISDN-cvs20061107-2_fc6.lc.src.rpm $ rpmbuild --rebuild mISDN-cvs20061107-2_fc6.lc.src.rpm then check /usr/src/redhat/RPMS/i386/ You should have the kernel modules and userspace applications. Once installed, I could enable chan_misdn in asterisk 1.4 without issue, and it's working great in NT mode with ISDN phones. I haven't tested asterisk 1.2, but there is no it shouldn't work as well. Julian J. M. On 12/29/06, Remco Barendse [EMAIL PROTECTED] wrote: On Thu, 28 Dec 2006, Gavin Hamill wrote: On Thursday 28 December 2006 23:27, Tzafrir Cohen wrote: vzaphfc is not a complete replacement of bristuff. It replies on most of it. Rather, it replaces the zaphfc subdirectory with an improved ZapBRI driver for HFC-s-based PCI cards. Further, if you're looking for 'something else' re: cheapo ISDN cards, definately give Asterisk 1.4 and mISDN a look - no BRIStuff, no huge patches, no wacky stuff.. all Asterisk-core support that worked really well in the brief time I tested it. The key difference is rather than generating 8000 interrupts per second, the mISDN kernel driver (which itself can be thought of 'isdn4linux' version 2.0) polls the card, leading to much lower system load, and no 'wanted 8 bytes, read 7!' errors from dmesg. Thanks for the tip, I'll have a look at it. The main reason for me to use bristuff is that i don't want to mess mess around downloading and compiling my own kernels. I am just running CentOS 4 boxes with stock CentOS 4 kernels. Everytime I was screwing around with making my own kernels sooner or later I got bitten by screwing up the installation of the kernel and the box wouldn't boot anymore. :) On the wiki I found the manual from BeroNet which looks pretty straightforward but is for Asterisk 1.2 Any differences for Asterisk 1.4? Thanks!! ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] vzaphfc?
On Fri, 29 Dec 2006, Julian J. M. wrote: It's not necessary to recompile the kernel for mISDN support. Check http://www.laimbock.com/asterisk/ Grab the mISDN source rpm, and build it. $ wget http://www.xs4all.nl/~pjl/downloads/asterisk/srpms/mISDN-cvs20061107-2_fc6.lc.src.rpm $ rpmbuild --rebuild mISDN-cvs20061107-2_fc6.lc.src.rpm then check /usr/src/redhat/RPMS/i386/ You should have the kernel modules and userspace applications. Once installed, I could enable chan_misdn in asterisk 1.4 without issue, and it's working great in NT mode with ISDN phones. I haven't tested asterisk 1.2, but there is no it shouldn't work as well. Julian J. M. Sounds great thanks for the pointer!! I'll give it a try tonight Cheers! Remco ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] vzaphfc?
Hi list! I'm totally fed up with bristuff (or it's instability with a simple HFC-S card), 2 out of 3 times when people try to call they get the information tone that the number is not connected. I would like to try vzaphfc and I am looking for information on it. From previous posts I found that the only place where the sources seem to be maintained and available is at the debian site which I found here : http://svn.debian.org/wsvn/pkg-voip/zaptel/trunk/vzaphfc/ But I couldn't find any place where I could download a tarball. Is vzaphfc an inplace replacement of the zaptel of bristuff? Or something separate? Thanks!! ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] vzaphfc?
On 21:04, Thu 28 Dec 06, Remco Barendse wrote: Hi list! I'm totally fed up with bristuff (or it's instability with a simple HFC-S card), 2 out of 3 times when people try to call they get the information tone that the number is not connected. I would like to try vzaphfc and I am looking for information on it. From previous posts I found that the only place where the sources seem to be maintained and available is at the debian site which I found here : http://svn.debian.org/wsvn/pkg-voip/zaptel/trunk/vzaphfc/ But I couldn't find any place where I could download a tarball. Is vzaphfc an inplace replacement of the zaptel of bristuff? Or something separate? Remco, When you found out stuff, specially how to make stuff with a simple HFC-S card stable please let me know. We are not deploying them cards anymore because we never get it stable. Real simple setups can be done with a FRITZ!PCI card, but I really prefer the quadbri cards for ISDN2 -- Michiel van Baak [EMAIL PROTECTED] http://michiel.vanbaak.eu GnuPG key: http://pgp.mit.edu:11371/pks/lookup?op=getsearch=0x71C946BD Why is it drug addicts and computer afficionados are both called users? ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] vzaphfc?
On Thu, Dec 28, 2006 at 09:04:40PM +0100, Remco Barendse wrote: Hi list! I'm totally fed up with bristuff (or it's instability with a simple HFC-S card), 2 out of 3 times when people try to call they get the information tone that the number is not connected. I would like to try vzaphfc and I am looking for information on it. From previous posts I found that the only place where the sources seem to be maintained and available is at the debian site which I found here : http://svn.debian.org/wsvn/pkg-voip/zaptel/trunk/vzaphfc/ But I couldn't find any place where I could download a tarball. Is vzaphfc an inplace replacement of the zaptel of bristuff? Or something separate? vzaphfc is not a complete replacement of bristuff. It replies on most of it. Rather, it replaces the zaphfc subdirectory with an improved ZapBRI driver for HFC-s-based PCI cards. -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] vzaphfc?
On Thursday 28 December 2006 23:27, Tzafrir Cohen wrote: vzaphfc is not a complete replacement of bristuff. It replies on most of it. Rather, it replaces the zaphfc subdirectory with an improved ZapBRI driver for HFC-s-based PCI cards. Further, if you're looking for 'something else' re: cheapo ISDN cards, definately give Asterisk 1.4 and mISDN a look - no BRIStuff, no huge patches, no wacky stuff.. all Asterisk-core support that worked really well in the brief time I tested it. The key difference is rather than generating 8000 interrupts per second, the mISDN kernel driver (which itself can be thought of 'isdn4linux' version 2.0) polls the card, leading to much lower system load, and no 'wanted 8 bytes, read 7!' errors from dmesg. Cheers, Gavin. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] vzaphfc?
On Thu, 28 Dec 2006, Gavin Hamill wrote: On Thursday 28 December 2006 23:27, Tzafrir Cohen wrote: vzaphfc is not a complete replacement of bristuff. It replies on most of it. Rather, it replaces the zaphfc subdirectory with an improved ZapBRI driver for HFC-s-based PCI cards. Further, if you're looking for 'something else' re: cheapo ISDN cards, definately give Asterisk 1.4 and mISDN a look - no BRIStuff, no huge patches, no wacky stuff.. all Asterisk-core support that worked really well in the brief time I tested it. The key difference is rather than generating 8000 interrupts per second, the mISDN kernel driver (which itself can be thought of 'isdn4linux' version 2.0) polls the card, leading to much lower system load, and no 'wanted 8 bytes, read 7!' errors from dmesg. Thanks for the tip, I'll have a look at it. The main reason for me to use bristuff is that i don't want to mess mess around downloading and compiling my own kernels. I am just running CentOS 4 boxes with stock CentOS 4 kernels. Everytime I was screwing around with making my own kernels sooner or later I got bitten by screwing up the installation of the kernel and the box wouldn't boot anymore. :) On the wiki I found the manual from BeroNet which looks pretty straightforward but is for Asterisk 1.2 Any differences for Asterisk 1.4? Thanks!! ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] vzaphfc?
On Thu, 28 Dec 2006, Michiel van Baak wrote: When you found out stuff, specially how to make stuff with a simple HFC-S card stable please let me know. We are not deploying them cards anymore because we never get it stable. Real simple setups can be done with a FRITZ!PCI card, but I really prefer the quadbri cards for ISDN2 I think I'll try misdn or vzaphfc, if it is too complicated or i'm not satisfied with the results I will simply hook up a good old A/B adapter, convert the ISDN to analog lines and throw in a Digium TDM card. I've pretty much had it with ISDN2 ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
