From: pedro noticioso [EMAIL PROTECTED]
Date: Fri, 18 May 2007 20:36:59 -0700 (PDT)
hi there!
I have a couple phones connected to a sipura ata and
if I go into *- IVR, I press options on the regular
phones and it all works fine and dandy.
then I connect an xten softphone, a new extension in
my dialplan, I dial the ivr, * asks me to dial
something to go through it, I press keys on xten, but
nothing happens, * just times out through as if I did
not press anything!
is there some sort of configuration out there to tell
the xten softphone to work as expected? thanks!
Seems to be a mismatch in dtmfmode between Asterisk and Xten. You may try
dial ***7469 in Xten to bring up a magic menu. force_send_inband is
enabled by default - not sure if this has any bearing, though, because my
Xlite works with my Asterisks by default.
Then another problem!
I used the i extension, plus _X and _X. to make sure I
catch everything that is not propperly dialed.
If I take the regular phones that are connected
through the sipura ata, then dial 'exten =
700,1,Goto(default,s,1)' so that I get the asking for
an extension to reach, I dial a wrong number and
walla, its caight by one of my magic numbers!
BUT, if I pickup the same phone, and just dial the
same wrong number? I just get a busy signal! and there
is nothing registered at the CLI even though I added
DEBIG to the configuration! :s
Are you talking about the same context? (Specifically, does Sipura use
[default]?) Snippets of sip.conf and extensions.conf would be helpful if
you are not sure what to look.
Yuan Liu
What can I do to make sure I always send an error
sound and never again a busy signal?
thanks!
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users