[asterisk-users] ztcfg error : TE110p error with CAS signalling on span 1 conflicts with HDLC with ...
Dear All, I'm integrating avaya commuication manager difinity ver 1.0 with asterisk using B2B E1. following are the details of my H/W, zaptel configs and software installed. Digium TE110p asterisk 1.2.19 cent OS 4.4 zaptel 1.2.18 libpri 1.2.4 etc/zaptel.conf span=1,0,0,cas,hdb3 bchan=1-15,17-31 dchan=16 when i ztcfg -vvv im having this error message and the E1 is not getting up. cas signalling on span1 conflicts with HDLC with FCS on channel 16 The switchtype and signalling im using is national, pri_cpe I'm attaching the avaya config details for more information. Please help me to sorted out this problem. - Thanks Regards, Vidura Senadeera, Sri Lanka. Tel - +94114520036 Mobile - +9466596 SIGNALING GROUP Group Number: 1 Group Type: isdn-pri Associated Signaling? y Max number of NCA TSC: 0 Primary D-Channel: 01B0216 Max number of CA TSC: 0 Trunk Group for NCA TSC: Trunk Group for Channel Selection: X-Mobility/Wireless Type: NONE Supplementary Service Protocol: a DS1 CIRCUIT PACK Location: 01B02 Name: ZTE 1 Bit Rate: 2.048Line Coding: hdb3 Signaling Mode: isdn-pri Connect: network TN-C7 Long Timers? n Country Protocol: 7 Interworking Message: PROGress Interface Companding: alaw CRC? n Idle Code: DCP/Analog Bearer Capability: 3.1kHz Slip Detection? y Near-end CSU Type: other Echo Cancellation? n TRUNK GROUP Group Number: 1Group Type: isdn CDR Reports: y Group Name: OUTSIDE CALLCOR: 14 TN: 1TAC: 801 Direction: two-wayOutgoing Display? n Carrier Medium: PRI/BRI Dial Access? yBusy Threshold: 99Night Service: Queue Length: 0 Service Type: public-ntwrk Auth Code? nTestCall ITC: rest Far End Test Line No: TestCall BCC: 4 TRUNK PARAMETERS Codeset to Send Display: 6 Codeset to Send National IEs: 6 Max Message Size to Send: 260 Charge Advice: none Supplementary Service Protocol: a Digit Handling (in/out): enbloc/enbloc Trunk Hunt: cyclical Digital Loss Group: 13 Calling Number - Delete: Insert: Numbering Format: Bit Rate: 1200 Synchronization: sync Duplex: full Disconnect Supervision - In? y Out? n Answer Supervision Timeout: 0 TRUNK FEATURES ACA Assignment? nMeasured: none Wideband Support? n Maintenance Tests? y Data Restriction? n NCA-TSC Trunk Member: Send Name: n Send Calling Number: y Used for DCS? n Suppress # Outpulsing? nNumbering Format: public Outgoing Channel ID Encoding: preferred UUI IE Treatment: service-provider Replace Restricted Numbers? y Replace Unavailable Numbers? y Send Connected Number: y Send UUI IE? y Send UCID? n Send Codeset 6/7 LAI IE? y Ds1 Echo Cancellation? n US NI Delayed Calling Name Update? n SBS? n Network (Japan) Needs Connect Before Disconnect? n DS1 CIRCUIT PACK Location: 01B01 Name: ZTE 4 Bit Rate: 2.048Line Coding: hdb3 Signaling Mode: isdn-pri Connect: network TN-C7 Long Timers? n Country Protocol: 7 Interworking Message: PROGress Interface Companding: alaw CRC? n Idle Code: DCP/Analog Bearer Capability: 3.1kHz Slip Detection? y Near-end CSU Type: other Echo Cancellation? n ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ztcfg error : TE110p error with CAS signalling on span 1 conflicts with HDLC with ...
On Wed, Sep 05, 2007 at 08:26:25PM +0530, Vidura Senadeera wrote: Dear All, I'm integrating avaya commuication manager difinity ver 1.0 with asterisk using B2B E1. following are the details of my H/W, zaptel configs and software installed. Digium TE110p asterisk 1.2.19 cent OS 4.4 zaptel 1.2.18 libpri 1.2.4 etc/zaptel.conf span=1,0,0,cas,hdb3 Maybe try instead: span=1,0,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 when i ztcfg -vvv im having this error message and the E1 is not getting up. cas signalling on span1 conflicts with HDLC with FCS on channel 16 The switchtype and signalling im using is national, pri_cpe national? Is this the one that should be used there? Not euroisdn? (Though this is unrelated to the current issue. we're not in chan_zap yet, so zapata.conf is unrelated at the moment. It will be once you get over the above error) -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ztcfg error : TE110p error with CAS signalling on span 1 conflicts with HDLC with ...
On Wed, 2007-09-05 at 20:26 +0530, Vidura Senadeera wrote: Dear All, I'm integrating avaya commuication manager difinity ver 1.0 with asterisk using B2B E1. following are the details of my H/W, zaptel configs and software installed. Digium TE110p asterisk 1.2.19 cent OS 4.4 zaptel 1.2.18 libpri 1.2.4 etc/zaptel.conf span=1,0,0,cas,hdb3 bchan=1-15,17-31 dchan=16 Remove dchan=16 from zaptel.conf. -- Telecomunicaciones Abiertas de México S.A. de C.V. Carlos Chávez Prats Director de Tecnología +52-55-91169161 ext 2001 signature.asc Description: This is a digitally signed message part ___ Sign up now for AstriCon 2007! September 25-28th. http://www.astricon.net/ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ztcfg error : TE110p error with CAS signalling on span 1 conflicts with HDLC with ...
Vidura Senadeera wrote: Dear All, I'm integrating avaya commuication manager difinity ver 1.0 with asterisk using B2B E1. following are the details of my H/W, zaptel configs and software installed. Digium TE110p asterisk 1.2.19 cent OS 4.4 zaptel 1.2.18 libpri 1.2.4 etc/zaptel.conf span=1,0,0,cas,hdb3 bchan=1-15,17-31 dchan=16 when i ztcfg -vvv im having this error message and the E1 is not getting up. cas signalling on span1 conflicts with HDLC with FCS on channel 16 It's fairly self explanatory. CAS stands for Channel Associated Signalling. That means signalling is passed on the same channel that the media is, like in robbed bit signalling protocols like FXO, FXS, EM, etc. Since you are using a PRI which does not contain inband signalling, but rather out of band signalling, you need to set it to `ccs` instead of `cas` (in your span= line) which stands for Common Channel Signalling. This is for signalling modes such as PRI or SS7 which use a dedicated channel to do call related signalling. -- Matthew Fredrickson Software/Firmware Engineer Digium, Inc. ___ Sign up now for AstriCon 2007! September 25-28th. http://www.astricon.net/ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ztcfg error : TE110p error with CAS signalling on span 1 conflicts with HDLC with ...
I have the same setup asterisk-1.4.11 with TE120P two port E1 card with is connected with avaya system but signaling is Qsig becase i want unified dialplan my configuration /etc/zaptel.conf ### Digium TE120P Card Configuration # # E1 port 1 span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 # E1 port 2 span=2,0,0,ccs,hdb3 bchan=32-46,48-62 dchan=47 loadzone = in defaultzone=in /etc/asterisk/zapata.conf group=1 context=from-avaya signalling=pri_net channel = 1-15,17-31 group=2 context=from-pstn signalling=pri_cpe channel = 32-46,48-62 *Notes : - my avaya system clock is slave mode and my asterisk is master thats why i use pri_net on avaya Vidura Senadeera [EMAIL PROTECTED] wrote: Dear All, I'm integrating avaya commuication manager difinity ver 1.0 with asterisk using B2B E1. following are the details of my H/W, zaptel configs and software installed. Digium TE110p asterisk 1.2.19 cent OS 4.4 zaptel 1.2.18 libpri 1.2.4 etc/zaptel.conf span=1,0,0,cas,hdb3 bchan=1-15,17-31 dchan=16 when i ztcfg -vvv im having this error message and the E1 is not getting up. cas signalling on span1 conflicts with HDLC with FCS on channel 16 The switchtype and signalling im using is national, pri_cpe I'm attaching the avaya config details for more information. Please help me to sorted out this problem. - Thanks Regards, Vidura Senadeera, Sri Lanka. Tel - +94114520036 Mobile - +9466596 SIGNALING GROUP Group Number: 1 Group Type: isdn-pri Associated Signaling? y Max number of NCA TSC: 0 Primary D-Channel: 01B0216 Max number of CA TSC: 0 Trunk Group for NCA TSC: Trunk Group for Channel Selection: X-Mobility/Wireless Type: NONE Supplementary Service Protocol: a DS1 CIRCUIT PACK Location: 01B02 Name: ZTE 1 Bit Rate: 2.048Line Coding: hdb3 Signaling Mode: isdn-pri Connect: network TN-C7 Long Timers? n Country Protocol: 7 Interworking Message: PROGress Interface Companding: alaw CRC? n Idle Code: DCP/Analog Bearer Capability: 3.1kHz Slip Detection? y Near-end CSU Type: other Echo Cancellation? n TRUNK GROUP Group Number: 1Group Type: isdn CDR Reports: y Group Name: OUTSIDE CALLCOR: 14 TN: 1TAC: 801 Direction: two-wayOutgoing Display? n Carrier Medium: PRI/BRI Dial Access? yBusy Threshold: 99Night Service: Queue Length: 0 Service Type: public-ntwrk Auth Code? nTestCall ITC: rest Far End Test Line No: TestCall BCC: 4 TRUNK PARAMETERS Codeset to Send Display: 6 Codeset to Send National IEs: 6 Max Message Size to Send: 260 Charge Advice: none Supplementary Service Protocol: a Digit Handling (in/out): enbloc/enbloc Trunk Hunt: cyclical Digital Loss Group: 13 Calling Number - Delete: Insert: Numbering Format: Bit Rate: 1200 Synchronization: sync Duplex: full Disconnect Supervision - In? y Out? n Answer Supervision Timeout: 0 TRUNK FEATURES ACA Assignment? nMeasured: none Wideband Support? n Maintenance Tests? y Data Restriction? n NCA-TSC Trunk Member: Send Name: n Send Calling Number: y Used for DCS? n Suppress # Outpulsing? nNumbering Format: public Outgoing Channel ID Encoding: preferred UUI IE Treatment: service-provider Replace Restricted Numbers? y Replace Unavailable Numbers? y Send Connected Number: y Send UUI IE? y Send UCID? n Send Codeset 6/7 LAI IE? y Ds1 Echo Cancellation? n US NI Delayed Calling Name Update? n SBS? n Network (Japan) Needs Connect Before Disconnect? n DS1 CIRCUIT PACK Location: 01B01 Name: ZTE 4 Bit Rate: 2.048Line Coding: hdb3 Signaling Mode: isdn-pri Connect: network TN-C7 Long Timers? n Country Protocol: 7 Interworking Message: PROGress Interface Companding: alaw
Re: [asterisk-users] ztcfg error : TE110p error with CAS signalling on span 1 conflicts with HDLC with ...
Off-topic to the original thread. I just wonder what you meant in your configuration: On Wed, Sep 05, 2007 at 09:58:19PM -0700, satish patel wrote: I have the same setup asterisk-1.4.11 with TE120P two port E1 card with is connected with avaya system but signaling is Qsig becase i want unified dialplan my configuration /etc/zaptel.conf ### Digium TE120P Card Configuration # # E1 port 1 span=1,1,0,ccs,hdb3 '1' in the timing parameter: You tell Zaptel to take timing from that span. bchan=1-15,17-31 dchan=16 # E1 port 2 span=2,0,0,ccs,hdb3 '0' in the timing parameter. You tell asterisk not to take timing from that span (and hence implicitly provide timing). bchan=32-46,48-62 dchan=47 loadzone = in defaultzone=in /etc/asterisk/zapata.conf And what do you use for switchtype? group=1 context=from-avaya signalling=pri_net channel = 1-15,17-31 Span 1 (you timing master) is the Avaya? group=2 context=from-pstn signalling=pri_cpe channel = 32-46,48-62 Span 2 is the PSTN? *Notes : - my avaya system clock is slave mode and my asterisk is master thats why i use pri_net on avaya So you take timing from the Avaya switch rather than from the PSTN? -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ Sign up now for AstriCon 2007! September 25-28th. http://www.astricon.net/ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
