Re: [Asterisk-Users] TDM2400 wierdness
Kerry: I hope this helps. I had EXACTLY the same symptom when I was trying to get an X100P clone to work yesterday. Bumping the toneduration parameter in zapata.conf to 200 milliseconds cured the problem. Roger Kerry Garrison wrote: Asterisk 1.2.1 Updated the TDM2400 driver over the weekend Incoming calls seem to work perfectly Outbound calls never connect. If you listen in on the call to a 7 digit local number, you hear the first 6 digits, then a small delay, then the last digit. Then there is a long pause before the line is picked up, then a very long pause before the telco fires back you call could not be completed at this time. Calling using an analog phone on that line works fine. Do I possibly have some DTMF issues or something like that? Any suggestions would be appreciated. This is my only installation with the TDM2400 so I am kind of at a loss. Kerry Garrison Director of Technical Services Tech Data Pros - Orange County's Mobile IT Service Provider (949) 502-7819 x200 - [EMAIL PROTECTED] http://www.techdatapros.com ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Roger Hill 07739 707 180 Perseverance is the hard work you do after you get tired of doing the hard work you already did. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TDM2400 wierdness
Thanks, I will try that. -Kerry -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Roger Hill Sent: Thursday, December 29, 2005 1:09 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] TDM2400 wierdness Kerry: I hope this helps. I had EXACTLY the same symptom when I was trying to get an X100P clone to work yesterday. Bumping the toneduration parameter in zapata.conf to 200 milliseconds cured the problem. Roger Kerry Garrison wrote: Asterisk 1.2.1 Updated the TDM2400 driver over the weekend Incoming calls seem to work perfectly Outbound calls never connect. If you listen in on the call to a 7 digit local number, you hear the first 6 digits, then a small delay, then the last digit. Then there is a long pause before the line is picked up, then a very long pause before the telco fires back you call could not be completed at this time. Calling using an analog phone on that line works fine. Do I possibly have some DTMF issues or something like that? Any suggestions would be appreciated. This is my only installation with the TDM2400 so I am kind of at a loss. Kerry Garrison Director of Technical Services Tech Data Pros - Orange County's Mobile IT Service Provider (949) 502-7819 x200 - [EMAIL PROTECTED] http://www.techdatapros.com ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Roger Hill 07739 707 180 Perseverance is the hard work you do after you get tired of doing the hard work you already did. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TDM2400 wierdness
Try adding a w in your dial statement. Asterisk will dial even if the line is not ready with a dialtone, adding a w will wait a bit and then dial the number. On 12/29/05, Kerry Garrison [EMAIL PROTECTED] wrote: Thanks, I will try that. -Kerry -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Roger Hill Sent: Thursday, December 29, 2005 1:09 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] TDM2400 wierdness Kerry: I hope this helps. I had EXACTLY the same symptom when I was trying to get an X100P clone to work yesterday. Bumping the toneduration parameter in zapata.conf to 200 milliseconds cured the problem. Roger Kerry Garrison wrote: Asterisk 1.2.1 Updated the TDM2400 driver over the weekend Incoming calls seem to work perfectly Outbound calls never connect. If you listen in on the call to a 7 digit local number, you hear the first 6 digits, then a small delay, then the last digit. Then there is a long pause before the line is picked up, then a very long pause before the telco fires back you call could not be completed at this time. Calling using an analog phone on that line works fine. Do I possibly have some DTMF issues or something like that? Any suggestions would be appreciated. This is my only installation with the TDM2400 so I am kind of at a loss. Kerry Garrison Director of Technical Services Tech Data Pros - Orange County's Mobile IT Service Provider (949) 502-7819 x200 - [EMAIL PROTECTED] http://www.techdatapros.com ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Roger Hill 07739 707 180 Perseverance is the hard work you do after you get tired of doing the hard work you already did. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tom Vile Baldwin Technology Solutions, Inc Consulting - Web Design - VoIP Telephony www.baldwintechsolutions.com Phone: 518-631-2855 x205 Fax: 518-631-2856 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TDM2400 wierdness
The toneduration setting seems to have fixed it. Thanks for the tip! -Kerry -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom Vile Sent: Thursday, December 29, 2005 7:13 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] TDM2400 wierdness Try adding a w in your dial statement. Asterisk will dial even if the line is not ready with a dialtone, adding a w will wait a bit and then dial the number. On 12/29/05, Kerry Garrison [EMAIL PROTECTED] wrote: Thanks, I will try that. -Kerry -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Roger Hill Sent: Thursday, December 29, 2005 1:09 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] TDM2400 wierdness Kerry: I hope this helps. I had EXACTLY the same symptom when I was trying to get an X100P clone to work yesterday. Bumping the toneduration parameter in zapata.conf to 200 milliseconds cured the problem. Roger Kerry Garrison wrote: Asterisk 1.2.1 Updated the TDM2400 driver over the weekend Incoming calls seem to work perfectly Outbound calls never connect. If you listen in on the call to a 7 digit local number, you hear the first 6 digits, then a small delay, then the last digit. Then there is a long pause before the line is picked up, then a very long pause before the telco fires back you call could not be completed at this time. Calling using an analog phone on that line works fine. Do I possibly have some DTMF issues or something like that? Any suggestions would be appreciated. This is my only installation with the TDM2400 so I am kind of at a loss. Kerry Garrison Director of Technical Services Tech Data Pros - Orange County's Mobile IT Service Provider (949) 502-7819 x200 - [EMAIL PROTECTED] http://www.techdatapros.com ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Roger Hill 07739 707 180 Perseverance is the hard work you do after you get tired of doing the hard work you already did. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tom Vile Baldwin Technology Solutions, Inc Consulting - Web Design - VoIP Telephony www.baldwintechsolutions.com Phone: 518-631-2855 x205 Fax: 518-631-2856 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users