Thanks, I will try asterisk 1.8 tomorrow and see.
Sent from my iPhone
On Mar 13, 2012, at 8:24 PM, Kevin P. Fleming kpflem...@digium.com wrote:
On 03/13/2012 07:19 AM, Arstan Jusupov wrote:
So since remote UPDATE is not supported, this project of mine would fail. Is
that correct?
If your
Thanks for the quick reply, I was afraid of that. Oh well. :)
Rennes Neps
Elion Ettevõtted AS
rennes.n...@elion.ee
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Kevin P. Fleming
Sent: Tuesday, March 13,
hi all,
have asterisk set up in combination with fail2ban.
all works as expected only there is 1 extension that is trying to
register with a wrong password causing fail2ban to block the IP address,
normally that is ok behaviour but i have several extensions on that IP
address.
someone has
On Tuesday 13 March 2012, Randall wrote:
hi all,
have asterisk set up in combination with fail2ban.
all works as expected only there is 1 extension that is trying to
register with a wrong password causing fail2ban to block the IP address,
normally that is ok behaviour but i have several
On 13/03/2012 8:10 PM, Ishfaq Malik wrote:
On Tue, 2012-03-13 at 00:10 +0800, Larry Moore wrote:
On 12/03/2012 10:53 PM, Ishfaq Malik wrote:
Thanks for the input so far. I'm going to keep plugging away and if
anyone has any insights, they will be gladly appreciated. Ish
In SIP Account
Hi,
I've got the following setup:
PSTN/ISDN E1- Asterisk E1- Alcatel 4400 PBX
TDM phones
When a TDM phone is dialing out to a national number, it seems that
the PBX is using enbloc dialing.
When a TDM phone is dialing out to an international number (variable
length
Hi all,
I have problems starting dahdi.
dahdi_cfg -vvv allwasy comes back with:
DAHDI Tools Version - 2.2.1.1
DAHDI Version: 2.3.0.1
Echo Canceller(s):
Configuration
==
SPAN 1: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel
Hi Steve
Thanks for your input. Please check my comments.
I have a server with 24 cores running at 2.4ghz and 16 GB RAM. How
many concurrent SIP sessions I can run from single instance of
Asterisk on this server? I wish to use G711 codec with echo cancel.
And all calls needs to be
This means the config file says 3 ports, but no card is detected.
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of rama...@gmx.de
Sent: Tuesday, March 13, 2012 10:31 AM
To: asterisk-users@lists.digium.com
Hi Kevin,
Thank for your views. Where as no one is ready to share real numbers. I am
looking at benchmarks so that I can plan for resources.
Since asterisk project is active for so many years, I was expecting some
published numbers.
Thanks Regards,
Amit Patkar
On 03/12/2012 03:38 PM, Steve
On 03/13/2012 08:11 AM, A J Stiles wrote:
On Tuesday 13 March 2012, Randall wrote:
hi all,
have asterisk set up in combination with fail2ban.
all works as expected only there is 1 extension that is trying to
register with a wrong password causing fail2ban to block the IP address,
normally that
On Tue, Mar 13, 2012 at 03:30:45PM +0100, rama...@gmx.de wrote:
dahdi_hardware:
driver should be 'zaphfc' but is actually 'hfcpci'
pci::00:0d.0 zaphfc+ 1397:2bd0 HFC-S ISDN BRI card
Looks like you may need to blacklist hfcpci in
/etc/modprobe.d/blacklist.conf.
--
Shaun Ruffell
On 03/13/2012 09:43 AM, Amit Patkar | Avhan Technologies Pvt Ltd wrote:
Thank for your views. Where as no one is ready to share real numbers. I am
looking at benchmarks so that I can plan for resources.
Since asterisk project is active for so many years, I was expecting some
published numbers.
From: Kevin P. Fleming kpflem...@digium.com
Sent: Tuesday, March 13, 2012 11:02 AM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] Capacity of single instance of Asterisk
On 03/13/2012 09:43 AM, Amit Patkar | Avhan Technologies Pvt Ltd
On Tue, Mar 13, 2012 at 03:30:45PM +0100, rama...@gmx.de wrote:
Hi all,
I have problems starting dahdi.
dahdi_cfg -vvv allwasy comes back with:
DAHDI Tools Version - 2.2.1.1
DAHDI Version: 2.3.0.1
Echo Canceller(s):
Configuration
==
SPAN 1: CCS/ AMI
Original-Nachricht
Datum: Tue, 13 Mar 2012 17:26:43 +0200
Von: Tzafrir Cohen tzafrir.co...@xorcom.com
An: asterisk-users@lists.digium.com
Betreff: Re: [asterisk-users] DAHDI_SPANCONFIG failed on span 1: No such
device or address (6)
On Tue, Mar 13, 2012 at 03:30:45PM
On 03/13/2012 02:11 PM, A J Stiles wrote:
On Tuesday 13 March 2012, Randall wrote:
hi all,
have asterisk set up in combination with fail2ban.
all works as expected only there is 1 extension that is trying to
register with a wrong password causing fail2ban to block the IP address,
normally that
On 03/13/2012 03:53 PM, Kevin P. Fleming wrote:
On 03/13/2012 08:11 AM, A J Stiles wrote:
On Tuesday 13 March 2012, Randall wrote:
hi all,
have asterisk set up in combination with fail2ban.
all works as expected only there is 1 extension that is trying to
register with a wrong password
On Tuesday 13 March 2012, Kevin P. Fleming wrote:
[tcpflow] will not help. Assuming we are talking about a SIP REGISTER here,
the password is *not* sent in the request. Asterisk issues a challenge
including a randomly generated value (called a 'nonce'), then the UA
attempting to register
Greetings list,
I'm trying to source a very basic ISDN BRI - SIP gateway.
Unfortunately, everything I've seen seems to want to do lots of other
things - registering handsets, IVRs, voicemail, etc. I only want it to
present an ISDN BRI as a SIP account - I have an asterisk server for the
On 01/03/12 10:05, Sebastian Arcus wrote:
I have a server with an OpenVox A400P card with 2 FXO modules on it. The
internal extensions are SIP Grandstream phones. When making or receiving
external calls through PSTN, there is an interrupted hissing like high
pitch noise - which might go away for
-users/attachments/20120313/bd147276/attachment-0001.htm
--
Message: 10
Date: Tue, 13 Mar 2012 17:26:43 +0200
From: Tzafrir Cohen tzafrir.co...@xorcom.com
Subject: Re: [asterisk-users] DAHDI_SPANCONFIG failed on span 1: No
such device or address (6)
To: asterisk
On Tue, 13 Mar 2012, Amit Patkar | Avhan Technologies Pvt Ltd wrote:
[Amit Patkar] I completely agree with you on distributing the load. At
the same time, I am looking at juicing hardware as well. Can you share
the number instead of saying couple hundreds?
In the universe of possible
Am 13.03.2012 21:13, schrieb Steve Edwards:
On Tue, 13 Mar 2012, Amit Patkar | Avhan Technologies Pvt Ltd wrote:
[Amit Patkar] I completely agree with you on distributing the load. At
the same time, I am looking at juicing hardware as well. Can you share
the number instead of saying couple
On Tue, Mar 13, 2012 at 05:10:14PM +0100, rama...@gmx.de wrote:
Original-Nachricht
Datum: Tue, 13 Mar 2012 17:26:43 +0200
Von: Tzafrir Cohen tzafrir.co...@xorcom.com
An: asterisk-users@lists.digium.com
Betreff: Re: [asterisk-users] DAHDI_SPANCONFIG failed on span 1: No
So I'm still trying to get this to work... (I'm top posting, but the details
are below, if you want/need background info)
I'd like Asterisk to detect incoming faxes and redirect them elsewhere. The
details aren't important, as long as I get the detection working.
I've added this to my
#1 you might need a progress() statement after answer
#2 what does sip show peer xxx look like on this peer?
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Mike Diehl
Sent: Tuesday, March 13, 2012 4:18 PM
To:
On Tuesday 13 March 2012 3:21:58 pm Danny Nicholas wrote:
#1 you might need a progress() statement after answer
I'll try that. Thank you.
#2 what does sip show peer xxx look like on this peer?
I'm testing against my office phone, a Polycom 501:
* Name : 0004F211F1D0-2
Realtime
On 03/13/2012 04:18 PM, Mike Diehl wrote:
So I'm still trying to get this to work... (I'm top posting, but the details
are below, if you want/need background info)
I'd like Asterisk to detect incoming faxes and redirect them elsewhere. The
details aren't important, as long as I get the
I am struggling to get the mac-addresses of IP phones that are connected
to asterisk as the phone are in different VLAN with * and they were
manually configured. I want to centralize their configuration using
res_phoneprov or tftp
I have tried nmap and arp in vain.
Any idea?
Sam
--
Ping the phones, then run arp.
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of
resea...@businesstz.com
Sent: Tuesday, March 13, 2012 4:52 PM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] Getting
On Tuesday 13 March 2012 3:45:18 pm Kevin P. Fleming wrote:
On 03/13/2012 04:18 PM, Mike Diehl wrote:
I've set faxdetect to 'yes' for the devices that I expect to be receiving
fax calls.
'faxdetect' is not a chan_sip configuration option (unlike chan_dahdi).
It's a feature that can be
On 14/03/2012 5:18 AM, Mike Diehl wrote:
So I'm still trying to get this to work... (I'm top posting, but the details
are below, if you want/need background info)
I'd like Asterisk to detect incoming faxes and redirect them elsewhere. The
details aren't important, as long as I get the
On 03/13/2012 04:56 PM, Mike Diehl wrote:
On Tuesday 13 March 2012 3:45:18 pm Kevin P. Fleming wrote:
On 03/13/2012 04:18 PM, Mike Diehl wrote:
I've set faxdetect to 'yes' for the devices that I expect to be receiving
fax calls.
'faxdetect' is not a chan_sip configuration option (unlike
Ouch. That isn't going to be so easy to spot, then! You would have to guess
a bunch of likely passwords, fake up a challenge with some known nonce, and
compare the response against those you would expect with each of the various
possible passwords. (You've already got the Source Code
On Tuesday 13 March 2012 4:04:31 pm Kevin P. Fleming wrote:
On 03/13/2012 04:56 PM, Mike Diehl wrote:
On Tuesday 13 March 2012 3:45:18 pm Kevin P. Fleming wrote:
On 03/13/2012 04:18 PM, Mike Diehl wrote:
I've set faxdetect to 'yes' for the devices that I expect to be
receiving fax calls.
Why would you want to even bother testing EOL products, such as 1.4x and
1.6.x.x?
Although I am a 1.4 Luddite, I really don't quite understand why you
can't test with 1.8.x or 10, where you mihgt have a hope of getting
something fixed if there is a problem, unless you already KNOW there is
The faxdetect option is documented in the 1.8 sip.conf.sample.
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Mike Diehl
Sent: Tuesday, March 13, 2012 6:17 PM
To: asterisk-users@lists.digium.com
Subject:
On 03/13/2012 05:45 PM, Eric Wieling wrote:
The faxdetect option is documented in the 1.8 sip.conf.sample.
Right, I forgot about that. Now I've really confused things.
/me heads back to his hole
--
Kevin P. Fleming
Digium, Inc. | Director of Software Technologies
Jabber: kflem...@digium.com
On 3/13/12 5:53 PM, Danny Nicholas wrote:
Ping the phones, then run arp.
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of
resea...@businesstz.com
Sent: Tuesday, March 13, 2012 4:52 PM
To:
Dear Chris
How about to use 2 Asterisk system interconnected through Wireless solution
point to point
one system should be for ISDN BRI gateway with Digium PCI card and the other
server for extension voice mal and so on.
for covering distances it will better to use Motorola Canopy web site or
On Mar 13, 2012, at 5:51 PM, resea...@businesstz.com wrote:
I am struggling to get the mac-addresses of IP phones that are connected
to asterisk as the phone are in different VLAN with * and they were
manually configured. I want to centralize their configuration using
res_phoneprov or tftp
On Tuesday 13 Mar 2012, Amit Patkar | Avhan Technologies Pvt Ltd wrote:
Thank for your views. Where as no one is ready to share real numbers.
I am looking at benchmarks so that I can plan for resources.
Since asterisk project is active for so many years, I was expecting
some published numbers.
James Sharp wrote:
On 3/13/12 5:53 PM, Danny Nicholas wrote:
Ping the phones, then run arp.
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of
resea...@businesstz.com
Sent: Tuesday, March 13, 2012 4:52 PM
Its because the card what I have only work with 1.4 and 1.6.
On Wed, Mar 14, 2012 at 4:05 AM, John Novack
jnov...@stromberg-carlson.orgwrote:
**
Why would you want to even bother testing EOL products, such as 1.4x and
1.6.x.x?
Although I am a 1.4 Luddite, I really don't quite understand why
45 matches
Mail list logo