Has anyone gotten call-waiting to function on the 4 line SPA-841?
I've seen some documents that say it can do it, some say no way.
If yes, can you share configs / SPA-841 settings?
If no, did you work around it?
I can call out just fine on all 4 lines, however, if I am on the line,
another
I was the one who originally asked the question..upgrading to @home
.7 fixed it for me. I hadn't dug into the dialplan, but all is well
now.
Too bad it was all for naught. The SPA-841 speakerphone sucks ROYALLY.
-Darren
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
Looks like it's time to fork..
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of Lenz
Sent: Monday, August 13, 2007 7:28 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] FW: The trixbox
Are you talking about PRI's? The ADIT's can't handle termination of PRI's,
only DI. I use them all the time to breakout FXS/FXO's for incoming and
outgoing analog lines, but they have a tendency to introduce lots of
echo.I've had to use HWEC every time I use the 600.
-D
None are great options. I'd use a T1 card and a channel bank.
At minimum I'd do the single 2400P. IRQ problems are going to be a
bear with multiple cards.
-Darren
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of Tony
Danger Wil Robinson!
Don't do it. If the cost is negligible, you are going to give up a huge
control / reliability factor. Unless you dedicated a T1 to just voice, you'll
not be able to guarantee quality.
I've had a few small companies use VOIP trunks with POTS backup, but I wouldn't
HAHAHA!
That's EXATCLY the same setup I'm running...even down to the cards in
the 600
Working like a champ.
-d
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of Doug Lytle
Sent: Saturday, January 21, 2006 8:06 PM
To: Asterisk
The Orion echo canceller is just ok. The
Tellabs units work just as well if you dont mind 10 mins of soldering.
I have the orion running with an adit 600
and a TE110P. Echo cancel is fairly good, but I have loads of problems with
DTMF digits.
-Darren
From:
Eh. Not for $1000 more, and I've got both in production. Customer service
was an issue.
-Darren
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Saturday, February 11, 2006 10:19 PM
To: Asterisk Users
AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] TE411P Really Bad Echo
Darren, how was customer service an issue? I mean once you got one to
work, it just plug and forget.
On 2/12/06, Darren Wright [EMAIL PROTECTED] wrote:
Eh. Not for $1000
You may want to turn the Rx gain down a bit..
-Darren
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of Joseph Tanner
Sent: Wednesday, February 15, 2006 10:35 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
only for the whole cardthe tx and rx gain affect all 24 channels.
-D
From: [EMAIL PROTECTED] on behalf of Kerry Garrison
Sent: Fri 3/3/2006 11:19 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] Echo Cancelation
OK.
I've got the COP SIP filehow do we use this thing on the 7970?
-Darren
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
InterestingI've upgraded the 7970 to SIP, but it is still saying
unprovisioned. I've got a SIPMAC file, but it is still looking for the
SEPMAC file...
Anyone got this working yet?
-D
___
--Bandwidth and Colocation provided by Easynews.com --
: [Asterisk-Users] NEWS: SIP Firmware Available for Cisco
7970
On Mon, 2006-03-06 at 22:11 -0500, Darren Wright wrote:
InterestingI've upgraded the 7970 to SIP, but it is still saying
unprovisioned. I've got a SIPMAC file, but it is still looking for
the
SEPMAC file...
That's correct - the CCM5
Forget the orion.lots of DTMF problemstech support is not
Terribly well spoken.
Look for ANY of the 257* series...
Just ebay for t1 echo
-D
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Matt
Sent: Wednesday, March 08, 2006 2:30 PM
To:
You'll want to use the XML park and pickup with the aastras.
Feel free to ping me off list if you need help.
-Darren
Dwright at d2-tech dot com
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of OCG
Technical Support
Sent: Monday, March
I've used lots of Digium T1 cards on DL380 / DL320's without a hiccup.
-Darren
From: [EMAIL PROTECTED] on behalf of Joshua Kinard
Sent: Tue 2/26/2008 5:51 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Had it with
Feel free to ping me off list. I've setup quite a few Cavtel PRI's with *.the
paperwork they asked you to setup?
Typically, they only send 4 digits.
Do you have the questionnare they asked you to fill out?
dwright at d2 - tech dot com.
From: [EMAIL
=asreceived
faxdetect=incoming
nsf=sdn
group=1
channel=1-23
zaptel.conf
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
On 3/15/08, Darren Wright [EMAIL PROTECTED] wrote
One of the major reasons we use DL320 / DL380's is the ease of swapping drives,
and the integrated ILO BIOS level access.We can support remote sites with
ease.
If a drive dies we get a notification, a new one is sent and a non-techie can
replace it with guidance.No onsite visit.
controllers and like 20 CPUs to chose from. How did
you
chose ?
Thx for sharing !!!
Darren Wright wrote:
One of the major reasons we use DL320 / DL380's is the ease of
swapping
drives, and the integrated ILO BIOS level access.We can support
remote
sites with ease.
If a drive dies we
Red Hat, Suse, Debian, ?
Was there some key feature it offered that the others didn't ?
Cost ?
Darren Wright wrote:
Notifications can be done either thru SNMP traps or SMTP. Insight
Manager is free from HP, but any SNMP trapper can work with alerts.
The recovery CD is just a build that reloads
CentPBX has bit the dust I believe.
-D
From: [EMAIL PROTECTED] on behalf of Chris Bagnall
Sent: Wed 4/2/2008 7:12 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [asterisk-users] CentPBX mirror?
Greetings list,
Not exclusively
I've used Adit600's almost exclusively for my installs. All have worked great
for me.
-D
From: [EMAIL PROTECTED] on behalf of Steve Totaro
Sent: Thu 4/3/2008 10:01 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users]
Are you trying ethernet or serial? Have you tried the other?
-Darren
From: [EMAIL PROTECTED] on behalf of C F
Sent: Thu 5/22/2008 1:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Adit 600 password reset
In
How far is the run? I'm wondering what you mean by $0 for hardware? I
typically use Ethernet extenders, but it has been a crapshoot on the quality
from Verizon.
What is a BANA circuit?
Finding someone who will even sell it to you has been somewhat of a game as
well.
I wonder if this is issue is largely limited to to Canada. (thus
limiting the market) In the states I think you can get PRI for around
$250. Am I right? In Canada, you have to have about 9 or 10 lines to
justify a PRI. At $250, the cost and added features could justify PRI
at around 4 lines.
Can anyone point me to the location of the 7970 SIP image? I'm logged
in thru my CCO acount with my smartnet contract and cannot find it
anywhere.
I know that a bunch of people have it at this point...how'd they get it?
-Darren
___
Subject: Re: [Asterisk-Users] 7970 SIP
Nkm [EMAIL PROTECTED] :
On 8/2/05, Darren Wright
wrote:
Can anyone point me to the location of the 7970 SIP image? I'm
logged
There's no SIP firmware for 7970, only SCCP firmware.
Am I right?
Sergio
Ok I've got SCCP running I have my 7970 firmware files.
Can anyone send an XMLdefault config and an SEP config file?
There are a bunch of sbn files in the package...not sure what needs to
be loaded.
-Darren
___
Asterisk-Users mailing list
Doing some funky stuff with an adit 600 that is...above my head, cross
connecting T1 channels, etc.
Need an Adit 600 expert..paid time.
Ping me off list.
dwright (at) d2-tech (dot) com
___
Asterisk-Users mailing list
I have implemented a simple findme solution based on DID's.
In the findme context, after trying each respective number (at s,5 and
s,6), I would like a voice saying The person was not available, press
pound to try the next number. Otherwise, it hangs up after 20 seconds
without dialing the next
My experience with an MP-108 was similar. Incredibly complex to setup,
and very little help from MFR, or even ABPTECH, the main US reseller.
We just couldn't get it working properly.
Ended up with a TE110P with an Adit 600 channel bank, which ROCKS.
Unbelieveably easy to setup. No echo
---
An ever better way is get some kind of SLA with guaranteed uptime and
bandwith, a symetrical link, and do some traffic shaping to ensure that
VoIP has priority. Part of the point of VoIP is to save money by
collapsing voice and data networks onto one (presumably
Yup...gonna need a T1 card for the server. Hope the TSU600 came with
the TDM controller...it should have
-D
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kris
Edwards
Sent: Thursday, August 11, 2005 12:41 PM
To: Asterisk Users Mailing List -
thru my cavalier T1 I am getting 20ms ping times to dca.broadvoice.com...I
switched all my voicepulse and sixtel to BV.
From: [EMAIL PROTECTED] on behalf of trixter http://www.0xdecafbad.com
Sent: Thu 4/21/2005 4:25 PM
To: Gerard Marcel; Asterisk Users
Yup..major broadvoice issues here as well. I can dial-in, but no dial out.
This is the first problem for me in 2 months.
-D
From: [EMAIL PROTECTED] on behalf of Sean Kennedy
Sent: Mon 4/25/2005 3:03 PM
To: asterisk-users@lists.digium.com
Subject: Re:
I also ordered from them, and called immediately to follow up. They got the
DID done in 5 mines. But this was in March or so.
I noticed that they must be using the same carrier as Voice pulseall the
numbers were the same.
-Darren
From: [EMAIL
You find me a reliable Teir 1 ISP T1 in New Hope, PA
for $300 to $400
and I'll give you the amount I save over the next quarter. NPA-NXX is
215-862. Good luck.
Ive got a Full T1 from a rather
large Mid-Atlantic CLEC for $291. Ive got about dozen of them
I have a client that has 10 POTS lines incoming. There is no other
option for lines here.
I have 3 options I can see:
1. 3 TDM400 cards
2. An external SIP/FXO gateway
3. A T1 card plus a channel bank.
Does anyone have any thoughts on these 3 or suggestions on keeping the
cost down?
-Darren
I agree about the TDM.nuff said.
There looks to be a nice gateway for $1000 or so.
The problem I see with channel banks is that any of them with FXO cards,
even on ebay are $$$. FXS are a non-issue.
-Darren
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
I'm looking at $1500 for the bank plus $500 for the T1 for a 10-port FXO
solution.
3 TDM cards are significantly less than that.
Any other ideas?
-Original Message-
From: Garrett Smith [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 23, 2005 6:52 PM
To: Darren Wright
Subject: RE
Does anyone have configs on the MP-108 FXO to asterisk setup? I'm doing
my best with the limited docs, but having very little success.
Thanks,
-Darren
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
Can Comedian Mail handle more than just an away and busy message? I've got a
client that would like even more of them.
I can write an app to replace messages externally, but I was wondering of
comedian could handle it internally.
Anyone figure out a way to add a call park
button, either on the bottom or on the sides during the call?
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
I'd be very interested to know how your Audiocodes install goes.
My experience was not good at all with an MP-108. It was very inconsistent,
and extremely hard to configure. I paid $275 for support from ABP, the
Audiocodes USA support provider, which was a waste. Thier answer was mostly
oh
8 POTS lines - Adit 600 - TE110P - Dell Precision 530 Dual Xeon running
1.0.9 and 1.2 (tried both)
The echo is insurmountable. I have tried everything, and the pots lines
are clean. If I go from an FXO on the Adit 600 straight to an FXS, I
get no echo from an analog phone.
I put an 128ms
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Darren
Wright
Sent: Tuesday, October 18, 2005 7:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Terrible echo with Te110P and Adit 600
8 POTS lines - Adit 600 - TE110P - Dell
I have given up totally on Digium based echo cancel, hardware or
software. The KB1 is the best so far, but still unacceptable. I
installed a hardware echocan FACING the T1 card in the asterisk box, and
all is perfect. No complaints from any of my clients since taking that
leap.
-Darren
] Behalf Of Darren
Wright
Sent: Tuesday, October 18, 2005 7:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Terrible echo with Te110P and Adit 600
8 POTS lines - Adit 600 - TE110P - Dell Precision 530 Dual
Xeon running 1.0.9 and 1.2 (tried both
I agree, this phone has now filled a large void in my client base, especially
for small systems in the 4 Trunk x 8 phone range. The Ciscos were just way
too expensive to make it viable.
-Darren
From: [EMAIL PROTECTED] on behalf of Julian Lyndon-Smith
What about telnet access? If you don't know the Ethernet IP use a
packet sniffer to detect it and then telnet to it. It may not be
password protected.
-D
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Wednesday, November 23,
I can't seem to get any ZAP trunks on my TE110P to match any extensions
for incoming DID.
I've even used the exten = _X.,1And it still will not match that.
All I get is:
-- Starting simple switch on 'Zap/1-1'
== Starting Zap/1-1 at zap-custom,s,1 failed so falling back to exten
's'
==
Wow, first of all, if you have a hundred analog lines, you are doing
yourself a disservice.a 4 T1's would be much much cheaper, and much
easier to manage.
Anyway, for 100 analog lines, I'd get 3 adit 600 channel banks and fill
them with FXO cards, and then buy 1 TE406 Quad T1 card for your
I've bought 2 Adit600's on ebay now for less than $500, for exactly the
install you are talking about.
I'm wondering why they wouldn't be a T1 though...should be less than
12-16 FXO's.
-Darren
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Erick
Perez
Anyone care to elaborate on the
differences between the T400P and the TE405P?
-Darren
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
Situation:
8 POTS lines, 3 companies, 1 system. Channel banking the POTS lines
onto a T1 thru an ADIT 600.
The only way our carrier will provide DNIS is thru Analog DID #'s.
Anyone know of a piece of hardware that can add DNIS digits to a
particular line?
-Darren
Is there a way to add DNIS digits, and pass it onto another line?
My provider will noy supply DNIS digits over analog lines, so I'd like
to take a call on a trunk, add some DNIS digits, and pass it to another
asterisk system...
-Darren
___
--Bandwidth
Sent: Monday, September 12, 2005 2:18 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Adding DNIS digits
Whats wrong with dial(zap/channel/${EXTEN}addeddnisdigitsgoeshere)
On 9/12/05, Darren Wright [EMAIL PROTECTED] wrote:
Is there a way to add DNIS
digits and passes them to the main system.
-Original Message-
From: C F [mailto:[EMAIL PROTECTED]
Sent: Monday, September 12, 2005 4:10 PM
To: Darren Wright; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: Re: [Asterisk-Users] Adding DNIS digits
In other words you telling
] On Behalf Of Darren
Wright
Sent: Monday, September 12, 2005 4:10 PM
To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: RE: [Asterisk-Users] Adding DNIS digits
Because I am trying to simulate DID lines which my telco cannot provide
over analog. I'd like to build
Has anyone gotten the Lucent / Orinoco injectors (AE-1, AE-6, AE-12) to
work with the Cisco 79* series phones?
I'm not sure if the are the statndard POE or not
-Darren
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users
RightoI was asking if anyone knew if the orinoco's were standard
802.3af
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Corey S.
McFadden
Sent: Friday, September 23, 2005 9:50 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject:
I am also a long time client, and have no incoming BV today.
-Darren
From: [EMAIL PROTECTED] on behalf of Jason Schafer
Sent: Mon 9/26/2005 12:08 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Asterisk and
I tried for weeks with an AB I, and never got anywhere...I could not get the T1
to sync properly. I switched exclusively to ADIT 600's and have had no issues
since.
-Darren
From: [EMAIL PROTECTED] on behalf of Time Bandit
Sent: Mon 9/26/2005 2:25 PM
To:
Sounds like no comfort noise.do you see this as well on VOIP trunks? sign
up for goiax or something like that to testI tend to think it is between
asterisk and the polycoms.
You could also test with a Sipura SP3000 as a replacement to see if you have
the same issue, or if you have
I have used the orion...you can buy right from them. However, I was not
impressed with their sales teamI have one on a beta test, and they
threatened to call a collection agency in when I refused paybent before
the beta expired.
I had some weird DTMF issues with the Orion, otherwise ok.
-D
Discussion
Subject: Re: [Asterisk-Users] HW Echo Cancellers
On 12/16/05, Darren Wright [EMAIL PROTECTED] wrote:
I have used the orion...you can buy right from them. However, I was not
impressed with their sales teamI have one on a beta test, and they
threatened to call a collection agency
We are moving our office, but our PRI isn't moving for a while yet.
I'd like to setup a box at the old office to receive -ALL-- PRI traffic
and send it over an IAX trunk to another Trixbox install at the new
office. Everything should go, period.
Any ideas on a simple dialplan to make
I'm surprised that Cavtel has not gotten back to you? I use both XO and
Cavtel in DC / Philly. Cavtel is almost unbeatable at pricing. Paetech is
also in the area, but I've had nothing but problems with them. USLEC is
another option.
I have direct contact with Cavtel agents.
I'm having the same exact problem..2 sites connected via the internet, 2
remote sites are unreachable, but the home site finds and can make calls just
fine to the 2 remotes.
-Darren
From: [EMAIL PROTECTED] on behalf of Royce Souther
Sent: Sun 2/10/2008
The HWEC, not software.
-Darren
From: [EMAIL PROTECTED] on behalf of Olivier
Sent: Thu 2/21/2008 12:37 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Which echo-can for Digium B410P ?
Hi,
Which echo-canceler shall
I've had some serious issues with Teliax as of late with their new
Denver server. DTMF issues, IAX2 connection issues, and major latency
issues. They are blaming it on 1.2 vs 1.4 asterisk compatibility
issues. I have had zero problems with their old servers.
Voicepulse has been WAY
Yup, SIP is working ok as well, except for the cross-country 100ms round trip.
Their answer was to upgrade to 1.4
Not an option for me.
Please ping me off list so we can further discuss.
dwright at d2 - tech dot com
-Darren
From: [EMAIL PROTECTED]
75 matches
Mail list logo