On 05/23/2012 08:41 PM, Cody Harris wrote:
Hello All,
I use IAX2 as the incoming connection from my DID provider. For
whatever reason, this works best for me, SIP connections lag very
frequently and only have about a 50% success rate for incoming calls
(they get dropped mysteriously).
I'm
- Original Message -
On 05/23/2012 08:41 PM, Cody Harris wrote:
Hello All,
I use IAX2 as the incoming connection from my DID provider. For
whatever reason, this works best for me, SIP connections lag very
frequently and only have about a 50% success rate for incoming
calls
On 05/24/2012 09:44 AM, Tim Nelson wrote:
BUT, even if fax is detected on an IAX2 channel, the only reason would be to
change dialplan logic accordingly correct? There is no T.38 equivalent within
IAX2, which means the OP will be handling faxes over a clear VoIP channel. The
information here
I'm running on 1.8 as of now
On May 24, 2012 11:00 AM, Kevin P. Fleming kpflem...@digium.com wrote:
On 05/24/2012 09:44 AM, Tim Nelson wrote:
BUT, even if fax is detected on an IAX2 channel, the only reason would be
to change dialplan logic accordingly correct? There is no T.38 equivalent
Sorry I hit send by mistake (touchscreens, sigh)
I've had good success with faxing over voip, I'm not expecting it to be
perfect, and my provider (voip.Ms) is planning on t.38, but I'm looking for
an interm solution. Audio faxing has worked every attempt both sending
receiving (5 and 5).
Should
On Thursday 24 May 2012, Cody Harris wrote:
I'm trying to implement a fax/voice switch. I have faxdetect=both in my
sip.conf, and when I use sip, it works well. However, from what I can
tell, there's no such option for IAX2 connections.
Any ideas on what I can do here, or am I out of luck?
I had considered this, however, I was trying not to buy another DID. It may
end up being the best solution.
On May 24, 2012 12:26 PM, A J Stiles asterisk_l...@earthshod.co.uk
wrote:
On Thursday 24 May 2012, Cody Harris wrote:
I'm trying to implement a fax/voice switch. I have faxdetect=both