Kristian,
Thanks for the response. I'm going to debug the DNS issue and then fiddle
more with the multiple routes & patches once I have a box again that I can
really screw up. Should be a couple of days.
My options at this point appear to be
- gated, or the like
- dead route detection using AR
/etc/modprobe.conf is not a symbolic link to /tmp/etc/modprobe.conf
H, something may be wrong, the devs will have to answer this.
Lonnie
On Oct 9, 2008, at 12:49 PM, Martin Rogers wrote:
> Lonnie and Tom
>
> thank you for your replies.
>
> I modified /mnt/kd/rc.conf as suggested by adding
>
Lonnie and Tom
thank you for your replies.
I modified /mnt/kd/rc.conf as suggested by adding
MODOPTS="wctdm:debug=1"
After rebooting, the /etc/rc.conf file has soaked up the change as expected.
There was still no change to /etc/modprobe.conf.
Debugging was not enabled. I verified this by mak
On Oct 9, 2008, at 10:54 AM, Tom Chadwin wrote:
> Can you put the option in rc.conf, under MODOPTS?
I don't do analog cards, but...
-- /etc/rc snippet --
if [ -n "$MODOPTS" ]; then
for i in $MODOPTS; do
MOD=`echo $i | cut -d: -f1`
OPT=`echo $i | cut -d: -f2`
echo "options $MOD
First og all, I have to admit that my Linux experience level is very close
to zero, so can really use some help.
For the moment I'm using a router with DD-WRT VOIP(Milkfish) firmware as SIP
proxy, but read about Soekris net5501 and thought it could be fun to build
my own router with Asterisk.
Can you put the option in rc.conf, under MODOPTS?
On 9 Oct 2008, at 13:41, "Martin Rogers" wrote:
> Hi
>
> I would like to update /etc/modprobe.conf to enable debugging of the
> wctdm card (I am suffering occasional disconnects when connected over
> the PSTN).
>
> I have remounted the disk as
Hi
I would like to update /etc/modprobe.conf to enable debugging of the
wctdm card (I am suffering occasional disconnects when connected over
the PSTN).
I have remounted the disk as RO and added the line
options wctdm debug=1
/etc/modprobe.conf and successfully saved the file. However after
reb